| Manufacturer | Engel |
|---|---|
| Model | Victory 750/180 Power |
| Year | 2004 |
| Location | Czech Republic
|
Overview:
Engel Victory 750/180 Power hydraulic injection moulding machine, manufactured in 2004. The machine is specified with a clamping force of 1,600 kN and an injection screw diameter of 45 mm. Maximum injection pressure is listed as 1,600 bar and maximum injection volume as 259 cm³.
Technical specifications (as provided):
- Model: Engel Victory 750/180 Power
- Year of manufacture: 2004
- Clamping force: 1,600 kN
- Screw diameter: 45 mm
- Maximum injection pressure: 1,600 bar
- Maximum injection volume: 259 cm³
- Space between columns: 520 x 520 mm
- Maximum mold height: 585 mm
- Minimum mold height: 275 mm
- Centering ring diameter: 160 mm
- Hot runners: 8
- Core puller: 1
- Pneumatic valves: 2
- Programmable inputs: 2
Additional equipment:
- Robot: Wittmann W818 (MY: 2015) listed as additional equipment.
Notes:
All specifications above are taken from the provided product information. No operational status (tested, working condition, refurbished, or warranty) is stated in the provided data and therefore is not claimed here. If you require additional details such as electrical power requirements, controller model/version, maintenance history, cycle performance, or current condition, consult the seller or the original listing for those specifics.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hydraulic injection moulding machine manufactured in 2004. This Engel Victory 750/180 Power features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It includes a screw diameter of 45 mm and a maximum injection pressure of 1,600 Bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 750/180 Power machine we have for sale. Contact us for further details regarding this machine.Space between columns: 520 x 520 mm
Maximum mold height: 585 mm
Minimum mold height: 275 mm
Maximum injection volume: 259 cm³
Maximum injection pressure: 1,600 bar
Centering ring: 160 mm
Hot runners in the machine: 8
Core puller: 1
Pneumatic valves: 2
Programmable inputs: 2
Additional equipment
Robot: Wittmann W818 (MY: 2015)
Clamping Force: 1600 kN
Screw Diameter: 45 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Hydraulic injection moulding machine manufactured in 2004. This Engel Victory 750/180 Power features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It includes a screw diameter of 45 mm and a maximum injection pressure of 1,600 Bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 750/180 Power machine we have for sale. Contact us for further details regarding this machine.Space between columns: 520 x 520 mm
Maximum mold height: 585 mm
Minimum mold height: 275 mm
Maximum injection volume: 259 cm³
Maximum injection pressure: 1,600 bar
Centering ring: 160 mm
Hot runners in the machine: 8
Core puller: 1
Pneumatic valves: 2
Programmable inputs: 2
Additional equipment
Robot: Wittmann W818 (MY: 2015)
Clamping Force: 1600 kN
Screw Diameter: 45 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview:
Engel Victory 750/180 Power hydraulic injection moulding machine, manufactured in 2004. The machine is specified with a clamping force of 1,600 kN and an injection screw diameter of 45 mm. Maximum injection pressure is listed as 1,600 bar and maximum injection volume as 259 cm³.
Technical specifications (as provided):
- Model: Engel Victory 750/180 Power
- Year of manufacture: 2004
- Clamping force: 1,600 kN
- Screw diameter: 45 mm
- Maximum injection pressure: 1,600 bar
- Maximum injection volume: 259 cm³
- Space between columns: 520 x 520 mm
- Maximum mold height: 585 mm
- Minimum mold height: 275 mm
- Centering ring diameter: 160 mm
- Hot runners: 8
- Core puller: 1
- Pneumatic valves: 2
- Programmable inputs: 2
Additional equipment:
- Robot: Wittmann W818 (MY: 2015) listed as additional equipment.
Notes:
All specifications above are taken from the provided product information. No operational status (tested, working condition, refurbished, or warranty) is stated in the provided data and therefore is not claimed here. If you require additional details such as electrical power requirements, controller model/version, maintenance history, cycle performance, or current condition, consult the seller or the original listing for those specifics.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
Germany
2007
| Clamping force | 800 T |
|---|---|
| Shot volume | 154 cm³ |
| Platen length | 670 mm |
| Equipped with robot | No |
| Number of heating zones | 4 |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Pressure on material | 1600 bar |
| Platen width | 600 mm |
| Robot interface | |
| Opening of the press | 456 mm |
| Clamping force | 90 T |
|---|
| Equipped with robot | Yes |
|---|
Germany
2009
| Clamping force | 600 T |
|---|---|
| Equipped with robot | Yes |
| Mould size |
| Shot volume | 2480 cm³ |
|---|---|
| Robot interface | Euromap 67 |
| Clamping force | 800 T |
|---|---|
| Tie bar spacing (H) | 1170 mm |
| Shot volume | 735 cm³ |
| Robot interface | Euromap 1350/800 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 1000 mm |
| Equipped with robot | Yes |
| Mould size | 250 - 900 |
| Clamping force | 110 T |
|---|---|
| Shot volume | 38 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Mould size | 250 |
| Screw diameter | 18 mm |
|---|---|
| Pressure on material | 2060 bar |
| Equipped with robot | No |
| Opening of the press | 350 mm |
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 850 mm |
| Shot volume | 192 cm³ |
| Platen length | 850 mm |
| Bi-metal screw | Yes |
| Robot interface | Viber |
| Number of heating zones | 24 |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 756 mm |
| Pressure on material | 2390 bar |
| Platen width | 750 mm |
| Equipped with robot | Yes |
| Number of cores | 5 |
| Mould size | 300 mm |
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 850 mm |
| Shot volume | 192 cm³ |
| Platen length | 850 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 12 |
| Mould size | 300 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 750 mm |
| Pressure on material | 2400 bar |
| Platen width | 750 mm |
| Equipped with robot | Yes |
| Number of cores | 5 |
| Opening of the press | 600 mm |
France
2011
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 45 cm³ |
| Equipped with robot | No |
| Opening of the press | 400 mm |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Pressure on material | 2400 bar |
| Robot interface | |
| Mould size |
France
2001
| Clamping force | 110 T |
|---|---|
| Tie bar spacing (H) | 790 mm |
| Shot volume | 251 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 300 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Pressure on material | 2020 bar |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size |
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 1130 mm |
| Robot interface |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 625 mm |
| Mould size |
| Clamping force | 120 T |
|---|---|
| Shot weight | 231 g |
| Platen length | 740 mm |
| Equipped with robot | Yes |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Pressure on material | 1300 bar |
| Platen width | 680 mm |
| Robot interface | Euro 12 |
France
2005
| Clamping force | 45 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 69 cm³ |
| Platen length | 500 mm |
| Bi-metal screw | Yes |
| Robot interface | CC100 |
| Opening of the press | 400 mm |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Pressure on material | 2400 bar |
| Platen width | 450 mm |
| Equipped with robot | No |
| Number of cores | 0 |
| Mould size | 200 |
| Clamping force | 120 T |
|---|---|
| Shot volume | 99 cm³ |
| Number of cores | 2 |
| Mould size | 700 |
| Screw diameter | 30 mm |
|---|---|
| Robot interface | |
| Opening of the press | 800 mm |
Portugal
1996
| Clamping force | 80 T |
|---|---|
| Shot volume | 154 cm³ |
| Pressure on material | 1600 bar |
| Platen width | 360 mm |
| Robot interface | EC 88 |
| Opening of the press | 450 mm |
| Screw diameter | 35 mm |
|---|---|
| Shot weight | 140 g |
| Platen length | 660 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Mould size | Mould Mould height min 250 mm |
| Clamping force | 900 T |
|---|---|
| Shot volume | 38 cm³ |
| Platen width | 680 mm |
| Number of heating zones | 4 |
| Mould size |
| Screw diameter | 22 mm |
|---|---|
| Platen length | 740 mm |
| Robot interface | |
| Opening of the press | 500 mm |
| Clamping force | 120 T |
|---|---|
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Mould size |
Germany
2006
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Equipped with robot | Yes |
| Number of cores | |
| Opening of the press | mm |
| Screw diameter | 120 mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
Germany
2005
| Clamping force | 80 T |
|---|---|
| Shot volume | 99 cm³ |
| Platen length | 670 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Mould size |
| Screw diameter | 30 mm |
|---|---|
| Pressure on material | 1450 bar |
| Platen width | 600 mm |
| Robot interface | |
| Opening of the press | 250 mm |
Turkey
2005
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 251 cm³ |
| Pressure on material | 1302 bar |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 231 g |
| Robot interface |
Switzerland
2002
| Clamping force | 120 T |
|---|---|
| Shot weight | 173 g |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Robot interface |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Pressure on material | 2400 bar |
| Robot interface |
| Tie bar spacing (H) | 500 mm |
|---|---|
| Shot volume | 69 cm³ |
| Equipped with robot | No |
| Mould size |
| Clamping force | 15000 T |
|---|---|
| Tie bar spacing (H) | 1530 mm |
| Shot volume | 6450 cm³ |
| Platen length | 2200 mm |
| Robot interface | |
| Opening of the press | 3050 mm |
| Screw diameter | 120 mm |
|---|---|
| Tie bar spacing (V) | 1275 mm |
| Pressure on material | 2020 bar |
| Platen width | 1990 mm |
| Number of heating zones | 7 |
| Mould size | 1400 |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 320 mm |
| Shot volume | 98 cm³ |
| Pressure on material | 1450 bar |
| Platen width | 320 mm |
| Opening of the press | 330 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Shot weight | 61 g |
| Platen length | 510 mm |
| Robot interface | |
| Mould size | 190/330 mm |
Spain
1991
| Clamping force | 350 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot volume | 740 cm³ |
| Pressure on material | 2100 bar |
| Platen width | 1030 mm |
| Opening of the press | 700 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 700 g |
| Platen length | 1030 mm |
| Robot interface | |
| Mould size |
| Clamping force | 180 T |
|---|---|
| Mould size |
| Robot interface |
|---|
Slovakia
2006
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 1100 T |
|---|---|
| Tie bar spacing (H) | 1150 mm |
| Shot volume | 10950 cm³ |
| Platen length | 1150 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 150 mm |
|---|---|
| Tie bar spacing (V) | 1400 mm |
| Pressure on material | 1350 bar |
| Platen width | 1400 mm |
| Opening of the press | 1800 mm |
| Clamping force | 800 T |
|---|---|
| Tie bar spacing (H) | 1025 mm |
| Shot volume | 2740 cm³ |
| Pressure on material | 1920 bar |
| Platen width | 1480 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 1700 mm |
| Screw diameter | 90 mm |
|---|---|
| Tie bar spacing (V) | 935 mm |
| Shot weight | 3348 g |
| Platen length | 1570 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 12 |
| Mould size | 650mm |
Шприцмашина Engel Victory 750/180 Power
Vstřikovací lis Engel Victory 750/180 Power
Engel Victory 750/180 Power Sprøjtestøbemaskine
Engel Victory 750/180 Power Spritzgießmaschine
Πρέσα έγχυσης Engel Victory 750/180 Power
Engel Victory 750/180 Power Injection moulding machine
Inyectora Engel Victory 750/180 Power
Presse à injecter Engel Victory 750/180 Power
Stroj za injekcijsko prešanje Engel Victory 750/180 Power
Engel Victory 750/180 Power Fröccsöntőgép
Pressa a iniezione Engel Victory 750/180 Power
Engel Victory 750/180 Power Įpurškimo liejimo staklės
Engel Victory 750/180 Power Spuitgietmachine
Wtryskarka Engel Victory 750/180 Power
Injetora Engel Victory 750/180 Power
Mașină de injectat Engel Victory 750/180 Power
Engel Victory 750/180 Power Термопластавтомат
Mašina za injekciono prešanje Engel Victory 750/180 Power
Engel Victory 750/180 Power Formsprutningsmaskin
Enjeksiyon makinesi Engel Victory 750/180 Power
Romania
Italy
Poland
Hungary
EN
- Languages
English (GB)