| Manufacturer | Engel |
|---|---|
| Model | Victory 200/90 tech + Viper 6 RC300 |
| Year | 2015 |
| Location | Germany
|
ENGEL Victory 200/90 tech hydraulic injection moulding machine with Viper 6 RC300 robot, manufactured in 2015. The machine has a clamping force of 90 tonnes and is equipped with a robot. Its stated total system height is 4100 mm.
The moulding machine features a central ejector system and a Stäubli magnetic clamping system. The configuration also includes an ENGEL cc300 control system. The Viper 6 RC300 robot is part of the machine setup. A touchscreen control panel is mounted on the machine housing, and dark transparent guarding covers the moulding area. A tall transparent safety door with a handle is also present beside the machine.
A blue-belt conveyor and metal support structure are positioned alongside the machine, with a transparent safety enclosure around the conveyor area. Blue hoses run along the side of the machine, and black hoses or cables are routed near the floor. These visible components are arranged around the machine and conveyor setup.
The exterior panels appear generally intact, with minor visible marks and no major damage apparent. The conveyor and machine housing also appear assembled and in generally good visible condition. This description covers the Engel Victory 200/90 tech injection moulding machine and its Viper 6 RC300 robot configuration, with the control system, ejector and magnetic clamping system noted above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 4-axis Engel Victory 200/90 tech + Viper 6 RC300 was manufactured in 2015. It features a clamping force of 90 tonnes and an injection unit size of 200. The machine includes a central ejector system and a magnetic clamping system for enhanced efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/90 tech + Viper 6 RC300 hydraulic injection moulding machine we have for sale. Contact us for further details.ENGEL Victory 200/90 tech
- Clamping Force: 90 tonnes
- Injection Unit Size: 200
- Total Operating Hours (Machine): 15,903 h
- Operating Hours in Automatic (Robot): 12,086 h
- Clamping Platen Execution: Tie-bar-less standard platen according to EUROMAP
- Centring Diameter: 125 mm EUROMAP
- Magnetic Clamping System: Stäubli magnetic clamping plate
- Ejector System: Central ejector with ejector safety interface
- Heating System: 230 V ceramic cylinder heating bands
ENGEL Viper 6 RC300
- Maximum Manipulation Weight (Payload): 5 kg
- Robot Axis Strokes:
X-Stroke: 400 mm
Y-Stroke (Single): 1,000 mm
Z-Stroke: 2,360 mm
C-Axis: Compact pneumatic rotary axis, 0–90° pivot, torque 6 Nm
- Minimum Deposit Height: 1450 mm (center of unswiveled C-axis, without gripper head and part)
- Max. Vertical Part / Gripper Head Size (TV): 200 mm
- Maximum Total System Height: 4100 mm (handling and machine incl. machine shoes)
- Part Deposit Side: Machine rear side
- Entry Movement: Vertical
Clamping Force: 900 kN
Control Brand: ENGEL
Control Model: cc300
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2064 |
| Last activity | Oct. 29, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 4-axis Engel Victory 200/90 tech + Viper 6 RC300 was manufactured in 2015. It features a clamping force of 90 tonnes and an injection unit size of 200. The machine includes a central ejector system and a magnetic clamping system for enhanced efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/90 tech + Viper 6 RC300 hydraulic injection moulding machine we have for sale. Contact us for further details.ENGEL Victory 200/90 tech
- Clamping Force: 90 tonnes
- Injection Unit Size: 200
- Total Operating Hours (Machine): 15,903 h
- Operating Hours in Automatic (Robot): 12,086 h
- Clamping Platen Execution: Tie-bar-less standard platen according to EUROMAP
- Centring Diameter: 125 mm EUROMAP
- Magnetic Clamping System: Stäubli magnetic clamping plate
- Ejector System: Central ejector with ejector safety interface
- Heating System: 230 V ceramic cylinder heating bands
ENGEL Viper 6 RC300
- Maximum Manipulation Weight (Payload): 5 kg
- Robot Axis Strokes:
X-Stroke: 400 mm
Y-Stroke (Single): 1,000 mm
Z-Stroke: 2,360 mm
C-Axis: Compact pneumatic rotary axis, 0–90° pivot, torque 6 Nm
- Minimum Deposit Height: 1450 mm (center of unswiveled C-axis, without gripper head and part)
- Max. Vertical Part / Gripper Head Size (TV): 200 mm
- Maximum Total System Height: 4100 mm (handling and machine incl. machine shoes)
- Part Deposit Side: Machine rear side
- Entry Movement: Vertical
Clamping Force: 900 kN
Control Brand: ENGEL
Control Model: cc300
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
ENGEL Victory 200/90 tech hydraulic injection moulding machine with Viper 6 RC300 robot, manufactured in 2015. The machine has a clamping force of 90 tonnes and is equipped with a robot. Its stated total system height is 4100 mm.
The moulding machine features a central ejector system and a Stäubli magnetic clamping system. The configuration also includes an ENGEL cc300 control system. The Viper 6 RC300 robot is part of the machine setup. A touchscreen control panel is mounted on the machine housing, and dark transparent guarding covers the moulding area. A tall transparent safety door with a handle is also present beside the machine.
A blue-belt conveyor and metal support structure are positioned alongside the machine, with a transparent safety enclosure around the conveyor area. Blue hoses run along the side of the machine, and black hoses or cables are routed near the floor. These visible components are arranged around the machine and conveyor setup.
The exterior panels appear generally intact, with minor visible marks and no major damage apparent. The conveyor and machine housing also appear assembled and in generally good visible condition. This description covers the Engel Victory 200/90 tech injection moulding machine and its Viper 6 RC300 robot configuration, with the control system, ejector and magnetic clamping system noted above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2064 |
| Last activity | Oct. 29, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
Czech Republic
1998
| Clamping force | 200 T |
|---|---|
| Shot volume | 607 cm³ |
| Pressure on material | 1280 bar |
| Platen width | 520 mm |
| Robot interface | |
| Opening of the press | 700 mm |
| Screw diameter | 40 mm |
|---|---|
| Shot weight | 547 g |
| Platen length | 820 mm |
| Equipped with robot | Yes |
| Number of heating zones | 5 |
| Mould size |
Poland
2002
| Clamping force | 600 T |
|---|---|
| Shot volume | 2740 cm³ |
| Mould size |
| Screw diameter | 90 mm |
|---|---|
| Robot interface |
Czech Republic
1998
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | 547 g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
Germany
2006
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Equipped with robot | Yes |
| Number of cores | |
| Opening of the press | mm |
| Screw diameter | 120 mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
Czech Republic
1995
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | mm |
| Screw diameter | mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 70 T |
|---|---|
| Shot volume | 69 cm³ |
| Pressure on material | 2381 bar |
| Opening of the press | 305 mm |
| Screw diameter | 25 mm |
|---|---|
| Shot weight | 62 g |
| Robot interface | |
| Mould size |
| Clamping force | 80 T |
|---|---|
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Mould size |
Spain
1991
| Clamping force | 350 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot volume | 740 cm³ |
| Pressure on material | 2100 bar |
| Platen width | 1030 mm |
| Opening of the press | 700 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 700 g |
| Platen length | 1030 mm |
| Robot interface | |
| Mould size |
| Clamping force | 180 T |
|---|---|
| Mould size |
| Robot interface |
|---|
Poland
2004
| Clamping force | 25 T |
|---|---|
| Robot interface |
| Screw diameter | 25 mm |
|---|---|
| Mould size |
Poland
1996
| Clamping force | 50 T |
|---|---|
| Robot interface |
| Screw diameter | 25 mm |
|---|---|
| Mould size |
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 125 T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | 154 cm³ |
| Pressure on material | 192 bar |
| Platen width | 560 mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | 286 g |
| Platen length | 680 mm |
| Equipped with robot | No |
| Number of cores | |
| Opening of the press | 300 mm |
Poland
2000
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | mm |
| Screw diameter | mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 45 T |
|---|---|
| Tie bar spacing (H) | 430 mm |
| Shot volume | cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | 350 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 550 mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
Germany
2007
| Clamping force | 600 T |
|---|---|
| Shot volume | 154 cm³ |
| Pressure on material | 1581 bar |
| Equipped with robot | No |
| Opening of the press | 335 mm |
| Screw diameter | 35 mm |
|---|---|
| Shot weight | 139 g |
| Bi-metal screw | No |
| Robot interface | |
| Mould size |
| Clamping force | 500 T |
|---|---|
| Shot volume | 1960 cm³ |
| Mould size | 500 - 1200 |
| Screw diameter | 80 mm |
|---|---|
| Robot interface |
France
1999
| Clamping force | 250 T |
|---|---|
| Shot volume | 763 cm³ |
| Platen length | 1150 mm |
| Robot interface |
| Screw diameter | 60 mm |
|---|---|
| Pressure on material | 1969 bar |
| Platen width | 900 mm |
| Mould size |
Portugal
2004
| Clamping force | 40 T |
|---|---|
| Tie bar spacing (H) | 1470 mm |
| Pressure on material | 1451 bar |
| Platen width | 400 mm |
| Opening of the press | 335 mm |
| Screw diameter | 30 mm |
|---|---|
| Shot volume | 99 cm³ |
| Platen length | 1210 mm |
| Robot interface | |
| Mould size |
Italy
2008
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 120 T |
|---|---|
| Shot volume | 300 cm³ |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Bi-metal screw | Yes |
| Robot interface | EUROMAP 62 |
| Number of heating zones | 5 |
France
2001
| Clamping force | 150 T |
|---|---|
| Shot volume | 251 cm³ |
| Platen length | 820 mm |
| Robot interface |
| Screw diameter | 40 mm |
|---|---|
| Pressure on material | 1300 bar |
| Platen width | 750 mm |
| Mould size |
France
1998
| Clamping force | 550 T |
|---|---|
| Tie bar spacing (H) | 915 mm |
| Shot weight | 1800 g |
| Platen width | 1280 mm |
| Mould size |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 860 mm |
| Platen length | 1345 mm |
| Robot interface |
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 110 T |
|---|---|
| Shot volume | 113 cm³ |
| Robot interface |
| Screw diameter | 30 mm |
|---|---|
| Pressure on material | 2180 bar |
| Mould size |
Germany
2006
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 110 T |
|---|---|
| Shot volume | 251 cm³ |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Robot interface |
Mexico
1998
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 530 mm |
| Shot volume | 99 cm³ |
| Pressure on material | 1450 bar |
| Platen width | 330 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 950 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 330 mm |
| Shot weight | 89 g |
| Platen length | 550 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 180 |
Шприцмашина Engel Victory 200/90 tech + Viper 6 RC300
Vstřikovací lis Engel Victory 200/90 tech + Viper 6 RC300
Engel Victory 200/90 tech + Viper 6 RC300 Sprøjtestøbemaskine
Engel Victory 200/90 tech + Viper 6 RC300 Spritzgießmaschine
Πρέσα έγχυσης Engel Victory 200/90 tech + Viper 6 RC300
Engel Victory 200/90 tech + Viper 6 RC300 Injection moulding machine
Inyectora Engel Victory 200/90 tech + Viper 6 RC300
Presse à injecter Engel Victory 200/90 tech + Viper 6 RC300
Stroj za injekcijsko prešanje Engel Victory 200/90 tech + Viper 6 RC300
Engel Victory 200/90 tech + Viper 6 RC300 Fröccsöntőgép
Pressa a iniezione Engel Victory 200/90 tech + Viper 6 RC300
Engel Victory 200/90 tech + Viper 6 RC300 Įpurškimo liejimo staklės
Engel Victory 200/90 tech + Viper 6 RC300 Spuitgietmachine
Wtryskarka Engel Victory 200/90 tech + Viper 6 RC300
Injetora Engel Victory 200/90 tech + Viper 6 RC300
Mașină de injectat Engel Victory 200/90 tech + Viper 6 RC300
Engel Victory 200/90 tech + Viper 6 RC300 Термопластавтомат
Mašina za injekciono prešanje Engel Victory 200/90 tech + Viper 6 RC300
Engel Victory 200/90 tech + Viper 6 RC300 Formsprutningsmaskin
Enjeksiyon makinesi Engel Victory 200/90 tech + Viper 6 RC300
Romania
Turkey
EN
- Languages
English (GB)