Price on request
View price| Clamping force | 250 T |
| Screw diameter | 60 mm |
| Tie bar spacing (H) | 685 mm |
| Tie bar spacing (V) | 735 mm |
| Shot weight | 679 g |
| Pressure on material | 998 bar |
| Platen length | 1005 mm |
| Platen width | 950 mm |
| Bi-metal screw | No |
| Equipped with robot | No |
| Robot interface | |
| Number of cores | 4 |
| Number of heating zones | 6 |
| Opening of the press | 550 mm |
| Mould size | 280-700 |
| ------------------- | |
| Weight | 2400 kg |
| worked hours | 25396 hours |
| hours under power | |
| state | as-is, where-is |
| At local norms | yes |
| status | visible |
| Last availability date | 06/06/2026 |
This listing features a Krauss Maffei injection moulding machine, model KM 251-1000 PX, manufactured in 2020. The machine is designed for industrial injection moulding applications and is equipped with a large metal platen that has multiple bolt holes and a central circular opening, supported by four large cylindrical tie bars. The platen surfaces show minor wear and some discoloration near the central opening, indicating typical usage but no significant damage. Two metal clamps are attached to the edges of the platen, likely for securing molds during operation.
The machine is set up in a clean and well-maintained industrial environment, with visible control and power units featuring warning labels and ventilation grills. Multiple cables and hoses are connected to the machine, suggesting it is ready for integration into a production line. A robotic arm labeled 'Krauss Maffei' is also part of the setup, including cable chains and wiring, indicating an automation and handling system designed to support efficient production processes. The components of the automation system appear intact.
Additional observations include a side view showing hydraulic and electrical connections with a large cylindrical component attached to hoses and cables, reinforcing the machine's complexity and readiness for operation. Labels on the machine provide further details such as operating voltage of 400V with 3-phase power and a frequency of 50Hz. The main switch is clearly marked with caution labels.
Overall, the Krauss Maffei KM 251-1000 PX injection moulding machine presents as a robust industrial unit with automation capabilities, suitable for high-precision moulding tasks. The visible condition suggests it has been maintained carefully, with only minor wear consistent with normal use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Parameter Value
Machine name M 251/1400PX
Year of manufacture 2020
Clamping force 2500 kN
Platen dimensions 1005 × 950 mm
Distance between columns 735 × 685 mm
Ejector centering 160 mm
Distance between movable platens 160 mm
Distance between platens 1250 mm
Maximum opening stroke 550 mm
Screw diameter 60 mm
Max injection volume 679 cm³
Max injection pressure 998 bar
Max ejector stroke 200 mm
Machine weight 2400 kg
Minimum mold height 280 mm
Maximum mold height 700 mm
Pneumatic air valves 2
Pneumatic cores 4
Hydraulic cores 1
Mobile platen cores 2
Fixed platen cores 1
Hot runner zones 6
Oil tank capacity 240 L
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this Krauss Maffei KM 251-1000 PX manufactured?
This Krauss Maffei KM 251-1000 PX Injection moulding machine was manufactured in 2020.
What part does the machine currently need?
The machine currently requires a new closing motor.
Is the closing unit functional?
The closing unit is currently non-functional.
Is there a service report available for the machine?
The seller has a service report from a KM dealer confirming the condition of the machine.
Can the movements of the injection unit and robot be demonstrated?
It is possible to demonstrate movements of the injection unit and robot.
What type of machine is this Krauss Maffei KM 251-1000 PX?
This Krauss Maffei KM 251-1000 PX is an injection moulding machine.
What year was this equipment manufactured?
This equipment was manufactured in the year 2020.
What type of machine is this Krauss Maffei KM 251-1000 PX?
This Krauss Maffei KM 251-1000 PX is an injection moulding machine.
What year was the machine manufactured?
This machine was manufactured in the year 2020.
What part needs to be replaced on this Krauss Maffei KM 251-1000 PX?
This Krauss Maffei KM 251-1000 PX injection moulding machine requires a new closing motor.
Is the closing unit functional on this machine?
The closing unit of this machine is currently non-functional.
Is a service report available for this machine?
A service report from a KM dealer is available to verify the machine's condition.
Can this equipment operate the injection unit and robot?
This equipment can still operate the injection unit and robot.
What is the machine's history in the injection moulding industry?
The machine has a history of usage in the injection moulding industry.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | June 5, 2026 |
Parameter Value
Machine name M 251/1400PX
Year of manufacture 2020
Clamping force 2500 kN
Platen dimensions 1005 × 950 mm
Distance between columns 735 × 685 mm
Ejector centering 160 mm
Distance between movable platens 160 mm
Distance between platens 1250 mm
Maximum opening stroke 550 mm
Screw diameter 60 mm
Max injection volume 679 cm³
Max injection pressure 998 bar
Max ejector stroke 200 mm
Machine weight 2400 kg
Minimum mold height 280 mm
Maximum mold height 700 mm
Pneumatic air valves 2
Pneumatic cores 4
Hydraulic cores 1
Mobile platen cores 2
Fixed platen cores 1
Hot runner zones 6
Oil tank capacity 240 L
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this Krauss Maffei KM 251-1000 PX manufactured?
This Krauss Maffei KM 251-1000 PX Injection moulding machine was manufactured in 2020.
What part does the machine currently need?
The machine currently requires a new closing motor.
Is the closing unit functional?
The closing unit is currently non-functional.
Is there a service report available for the machine?
The seller has a service report from a KM dealer confirming the condition of the machine.
Can the movements of the injection unit and robot be demonstrated?
It is possible to demonstrate movements of the injection unit and robot.
What type of machine is this Krauss Maffei KM 251-1000 PX?
This Krauss Maffei KM 251-1000 PX is an injection moulding machine.
What year was this equipment manufactured?
This equipment was manufactured in the year 2020.
What type of machine is this Krauss Maffei KM 251-1000 PX?
This Krauss Maffei KM 251-1000 PX is an injection moulding machine.
What year was the machine manufactured?
This machine was manufactured in the year 2020.
What part needs to be replaced on this Krauss Maffei KM 251-1000 PX?
This Krauss Maffei KM 251-1000 PX injection moulding machine requires a new closing motor.
Is the closing unit functional on this machine?
The closing unit of this machine is currently non-functional.
Is a service report available for this machine?
A service report from a KM dealer is available to verify the machine's condition.
Can this equipment operate the injection unit and robot?
This equipment can still operate the injection unit and robot.
What is the machine's history in the injection moulding industry?
The machine has a history of usage in the injection moulding industry.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Clamping force | 250 T |
| Screw diameter | 60 mm |
| Tie bar spacing (H) | 685 mm |
| Tie bar spacing (V) | 735 mm |
| Shot weight | 679 g |
| Pressure on material | 998 bar |
| Platen length | 1005 mm |
| Platen width | 950 mm |
| Bi-metal screw | No |
| Equipped with robot | No |
| Robot interface | |
| Number of cores | 4 |
| Number of heating zones | 6 |
| Opening of the press | 550 mm |
| Mould size | 280-700 |
| ------------------- | |
| Weight | 2400 kg |
| worked hours | 25396 hours |
| hours under power | |
| state | as-is, where-is |
| At local norms | yes |
| status | visible |
| Last availability date | 06/06/2026 |
This listing features a Krauss Maffei injection moulding machine, model KM 251-1000 PX, manufactured in 2020. The machine is designed for industrial injection moulding applications and is equipped with a large metal platen that has multiple bolt holes and a central circular opening, supported by four large cylindrical tie bars. The platen surfaces show minor wear and some discoloration near the central opening, indicating typical usage but no significant damage. Two metal clamps are attached to the edges of the platen, likely for securing molds during operation.
The machine is set up in a clean and well-maintained industrial environment, with visible control and power units featuring warning labels and ventilation grills. Multiple cables and hoses are connected to the machine, suggesting it is ready for integration into a production line. A robotic arm labeled 'Krauss Maffei' is also part of the setup, including cable chains and wiring, indicating an automation and handling system designed to support efficient production processes. The components of the automation system appear intact.
Additional observations include a side view showing hydraulic and electrical connections with a large cylindrical component attached to hoses and cables, reinforcing the machine's complexity and readiness for operation. Labels on the machine provide further details such as operating voltage of 400V with 3-phase power and a frequency of 50Hz. The main switch is clearly marked with caution labels.
Overall, the Krauss Maffei KM 251-1000 PX injection moulding machine presents as a robust industrial unit with automation capabilities, suitable for high-precision moulding tasks. The visible condition suggests it has been maintained carefully, with only minor wear consistent with normal use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | June 5, 2026 |
Шприцмашина Krauss Maffei KM 251-1000 PX
Vstřikovací lis Krauss Maffei KM 251-1000 PX
Krauss Maffei KM 251-1000 PX Sprøjtestøbemaskine
Krauss Maffei KM 251-1000 PX Spritzgießmaschine
Πρέσα έγχυσης Krauss Maffei KM 251-1000 PX
Krauss Maffei KM 251-1000 PX Injection moulding machine
Inyectora Krauss Maffei KM 251-1000 PX
Presse à injecter Krauss Maffei KM 251-1000 PX
Stroj za injekcijsko prešanje Krauss Maffei KM 251-1000 PX
Krauss Maffei KM 251-1000 PX Fröccsöntőgép
Pressa a iniezione Krauss Maffei KM 251-1000 PX
Krauss Maffei KM 251-1000 PX Įpurškimo liejimo staklės
Krauss Maffei KM 251-1000 PX Spuitgietmachine
Wtryskarka Krauss Maffei KM 251-1000 PX
Injetora Krauss Maffei KM 251-1000 PX
Mașină de injectat Krauss Maffei KM 251-1000 PX
Krauss Maffei KM 251-1000 PX Термопластавтомат
Mašina za injekciono prešanje Krauss Maffei KM 251-1000 PX
Krauss Maffei KM 251-1000 PX Formsprutningsmaskin
Enjeksiyon makinesi Krauss Maffei KM 251-1000 PX
EN
- Languages
English (GB)