Used converting and bindering machines 99

Zechini Saturno Book back rounding machine

Year: 1997

Make Zechini Model Saturno Year 1997 Working size 500 mm Thickness 90 mm (electric adjustable by lever switch) Condition good Available Direct

Minipack / Siat Modular 70 / TS80A L-Sealer - wrapping machine

Year: 2015

Make Minipack / Siat Model Modular 70 / TS80A Year 2015 Size 840 x 600 mm Details Semitautomatic with timers Speed 15 cycles per minute Details waste marerial rolled up

Minipack Sealmatic 56 TCS L-Sealer - wrapping machine

Year: 2000

Make Minipack Model Sealmatic 56 TCS Year 2000 or newer Size 400 x 550 mm Height 160 mm Details Semitautomatic with timers Speed 40 cycles per minute Shrinking tunnel Beck shrinking tunnel

Matchbook Advernote Matchbook noteblock pasting machine / advernote

Year: 1980

Make Matchbook Model Advernote Year 1980´s Size of the noteblock 50 x 50 mm Size of the cover 50 x 110 mm Cover process The cover is being fed automatic from the magazine by air, gets the creasing lines, and gets folded Noteblock process The noteblock is being fed automatic from the magazine by air, gets a dot of glue …

Oostveen JB automatic Joint forming machine

Year: 1995

Make Oostveen Model JB automatic Year 1995 Working width 470 mm Book size 160 - 550 mm Details automatic joint burning machine, can be used in-line or hand fed Machine can process both usual books as photo albums with mushroom shaped spine

Nagel VS-66 Index Cutting Machine

Year: ~ 1980

Make Nagel Model VS-66 Year 1980's ?? Details machine has undergone a electrical and mechanical modification to ensure safe working

Hunkeler RE32 Index Cutting Machine

Year: 1975

Make Hunkeler Model RE32 Year 1975 Capacity up to 8 mm Tool width up to 320 mm Tools 1 straight angle tool with a small radius is included (R=1,5 or R=2mm?) Details machine has undergone a electrical and mechanical modification to ensure a safer working

Bickel HK3/68 Hydr Perforating machine - hydraulic

Year: 1980

Working width 680 mm Tools 3:1 Wire-O tool with round holes 3:1 Wire-O tool with square holes Spiral tool with oval holes Perforating tool for stamps Details Hydraulic power

Hang 150-3P 2 head rivetingmachie

Year: 1992

Head distance 40 - 450 mm Distance till frame 600 mm Rivet transport Automatic rivet transpor

Arno 105 Riveting machine (2 heads)

Year: ~ 1975

Year 1975´s Head distance 30 - 450 mm

Pescha 106 M Double head corner cutter

Year: 1975

Year 1975 Knife included 7 mm upper + lower knife (other on request) Stackheight 100 mm Minimum cut 65 mm between the heads Maximum cut 420 mm between the heads Speed up to 80 cycles per minute With foot switch, manual clutch release for set-up,

Krause Y12RM Double head corner cutter

Year: 1980

Knife included 7 mm upper + lower knife (other on request) Stackheight 100 mm Minimum cut 65 mm between the heads Maximum cut 420 mm between the heads Speed up to 80 cycles per minute With foot switch, manual clutch release for set-up

KIPFOLD 2800 SYSTEM Post press machine

Year: 2016

KIP large format folder Katsuragawa Electric Co. KIPFOLD 2800. Large format folders are devices designed for automatic folding of printouts and documents.

Sheet feeder / vacuum OLEC DPF-20

Year: 2012

Sheet feeder / vacuum Make Olec Model DPF-20 Year 2012 Maz size 510 x 760 mm Grammage 148 - 600 grams Speed up to 4.000 sheets-hour, but especially can also run at low speeds for gluing-coating purposes pile height± up to 510 mm belt height from floor 710 mm Details with Becker 4.25 vacuum/compressor automatic table l;evel sensor, suctionwheel from …

Thermographic machine Sunraise SE-15

Year: 2008

Thermographic machine Make Sunraise Model SE-15 Year 2008 Working width 381 x endless (15") Speed up to 10.000 sheets per hour depending on sheet size Watt 7.500 watts using 1 zone or 12.000 watts using 2 zones Details can be used for all sorts of printed sheets, the thermograpic sheets are thereafter to be used also in laser printers Foot …

Zechini Strike Creasing + riveting machine (semi auto ringbinder maker)

Year: 1996

Working size 297 x 210 mm - 500 x 1000 mm Thickness 1.2 - 3.5 mm Creasing up to 999 creasings programmable Riveting 2 heads (distance 125 - 470 mm)

Lawson-Dexter B3 Paperdrillingmachine

Year: 1985

Year 1985-1990´s Details 4 head paper driller Variable drilling speed Variable drilling spinning speed Operation Electric footswitch

Schmedt Präcut HHS65 Spine cutting_notching machine

Year: 1996

Make Schmedt Model Präcut HHS65 Year 1996 Size 345 width and 80 mm thickness Speed up to 250-350 cycles per hour Details to be used before fan binding, suggested to be used with Schmedt Pràcoll

De Groot Punching machine (heavy duty)

Year: 1980

Make De Groot Model Punching Year 1980 Width 600 mm

Nagel Citoborma 480 AB Four head paperdriller

Year: 1988

Nagel Citoborma 480AB Year: 1988 Four head drilling machine with adjustable distance Electric powered drilling & up/down movement. With footswitch