Showing 1 - 20 out of 90
Year: 2014
Engine power | 22 kW |
---|---|
Rotor length | 500 mm |
Rotor Ø | 500 mm |
---|
Year: 2000
Engine power | 7.5 kW |
---|---|
Rotor length | 500 mm |
Rotor Ø | 160 mm |
---|
Year: 1992
Engine power | 45 kW |
---|---|
Rotor length | 400 mm |
Rotor Ø | 400 mm |
---|
Year: 1998
Shaft chipper Producer: Rudnick & Enners Type: RE-TH 130/400/3 Year: 1998 22nd quarter with vibrorine metal detection sensor Knife setting device 2 x table approx. 7 mYear:
Vécoplan VAZ 1100 shredder Three-phase 380V - 1 Tonne per hour (newsprint) with conveyor scraper Can shred paper, cardboard, wood etc... In working order - Overhauled electronic cabinetYear:
Hammer shredder with cyclone Isodan 1 Isodan hammer shredder with electronic control panel New motor and cabinet - Three-phase 380V - Fully serviced Supplied with cyclone dust filters Automatic dust removal by compressed air (external) With suction after defibration and blowing into the cyclone Not including the scraper on the left which goes with the Vécoplan shredderYear: 2014
Drum crusher with hydraulic pusher Knife drum width: 800 mm Mouth 800 x 1200 mm Motor: 18,5 kW extraction connection diameter 200 mmYear: 2007
Engine power | 18.5 kW |
---|---|
Rotor length | 800 mm |
Rotor Ø | 195 mm |
---|
Year: 1993
Engine power | 18.5 kW |
---|---|
Rotor length | 800 mm |
Rotor Ø | 175 mm |
---|
Year: 2005
Sawmills and Sawlines HewSaw SL250 Trio sawing line from year 2005 consists of log positioning devices, conveyors and three sawing machines. HewSaw sawing line is designed to process logs ranging from 100 mm – 420 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 6.2 m. Feeding speed of the sawing line can be adjusted …Year: 2000
Engine power | 75 kW |
---|---|
Rotor length | 1150 mm |
Rotor Ø | 350 mm |
---|
Year:
Engine power | 110 kW |
---|---|
Rotor length | 650 mm |
Rotor Ø | 650 mm |
---|
Year: 2007
Engine power | 45 kW |
---|---|
Rotor length | 515 mm |
Rotor Ø | 400 mm |
---|