Showing 1 - 20 out of 165
Year: 1997
Clamping force | 125 T |
---|---|
Tie bar spacing (H) | 475 mm |
Shot volume | 220 cm³ |
Screw diameter | 40 mm |
---|---|
Tie bar spacing (V) | 450 mm |
Shot weight | 200 g |
Year: 2011
UNTHA shredder, model RS60, year 2011, used very little: less than 1500 hours of operation (aluminum cans), complete with diesel generator, mounted on container chassis. Will be checked before delivery.Year: 2005
Clamping force | 395 T |
---|---|
Tie bar spacing (H) | 650 mm |
Shot volume | 1185 cm³ |
Screw diameter | 70 mm |
---|---|
Tie bar spacing (V) | 650 mm |
Pressure on material | 1500 bar |
Year: 2007
HEMINGSTONE 1000SR+IL bag making machine for bags with ribbon. The welding machine is in very good condition. I'm throwing in lots of extra parts and accessories for free. Specification: Weld width: 900mm Max Product Length: 1000mm Capacity 120m/min Drive: Servo Film thickness 0.015-0.05mm Roll diameter 1000mm Year of manufacture: 2007 Supported materials: LDPE, HDPE Fatek PLC Web guide Photoelectric cell …Year: 1999
Screw diameter | 80 mm |
---|---|
Type | Single screw |
Output | 230 kg/h |
---|
Year:
We offer a complete rubber mixing line that includes the following equipment: - Mixer EKN-50 soft start and stop automatic supply of lubricant, control cabinet (can operate in automatic, semi-automatic and manual modes, engine load control, temperature control in the mixing chamber) loading weight conveyor; conveyor for unloading the mixture onto the rollers; loading volume 70-75 kg - Roll Mill …Year: 1997
Clamping force | 150 T |
---|---|
Tie bar spacing (H) | 500 mm |
Shot volume | 354 cm³ |
Screw diameter | 50 mm |
---|---|
Tie bar spacing (V) | 500 mm |
Shot weight | 322 g |
Year: 1997
Screw diameter | 80 mm |
---|---|
Output | 70 kg/h |
Plastifying capacity | 70 kg/h |
---|
Year: 1994
TFT FCS 720 - 3 Station Thermoforming Machine The machine working hour is 73.000. Year 1994. Max Tooling Area : 685x500*150 Min Tooling Area : 350*250 Max Forming Area ( ROLL ) : 720*500 Maximum Cycyle : 35 Maximum Material FOR FORMING : 1,5mm. It’s avaliable for PS,PET,PVC, PET. It has tauten but we advice pre-heater for PP.Year: 1996
Screw diameter | 110 mm |
---|
Output | 600 kg/h |
---|
Year: 1995
Clamping force | 800 T |
---|---|
Tie bar spacing (H) | 1000 mm |
Shot volume | 4090 cm³ |
Screw diameter | 110 mm |
---|---|
Tie bar spacing (V) | 1000 mm |
Shot weight | 3650 g |
Year: 2004
Max sheet length | 500 mm |
---|---|
Total power requirement | 32 kW |
Max sheet width | 350 mm |
---|
Year: 2010
Rotomolding machine for the manufacture of polyurethane parts, in different sizes. Basic characteristics. Electronic speed control. Mold height adjustment. Independent arms at different speeds. 360º arm rotation. Automatic stop. Safety fairing with automatic closing and open door stop. Rotation of the head on its own center in 360º Head with tilting regulation, independently in “X” or Y””. Security screen with …Year:
Clamping force | 100 T |
---|---|
Tie bar spacing (H) | 420 mm |
Shot volume | 106 cm³ |
Screw diameter | 30 mm |
---|---|
Tie bar spacing (V) | 420 mm |
Shot weight | 89 g |
Year: 2009
Clamping force | 65 T |
---|---|
Tie bar spacing (H) | 370 mm |
Shot volume | 106 cm³ |
Screw diameter | 30 mm |
---|---|
Tie bar spacing (V) | 320 mm |
Pressure on material | 2042 bar |
Year: 2000
Clamping force | 100 T |
---|---|
Tie bar spacing (H) | 420 mm |
Shot volume | 169 cm³ |
Screw diameter | 35 mm |
---|---|
Tie bar spacing (V) | 420 mm |
Shot weight | 153 g |
Year: 2008
Complete tire retread plant built between 2004-2014 Production plant for 30,000 cold retreaded tires per year PRICE including installation and commissioning -Rail system "Helm 500" frames/supports manufacturer TRM -Rail length approx. 110m, rail height approx. 2m - 76 hooks with rollers - Various switches - 3 processing stations including suction connections - Spray tunnel for rubber solution incl. extraction - …Year: 2007
Screw diameter | 65 mm |
---|
Output | 250 kg/h |
---|