Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
United Kingdom
2004
| Clamping force | 60 T |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Robot interface |
| Tie bar spacing (H) | 320 mm |
|---|---|
| Shot weight | 64 g |
| Mould size |
United Kingdom
2007
| Clamping force | 60 T |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Robot interface |
| Tie bar spacing (H) | 320 mm |
|---|---|
| Shot weight | 46 g |
| Mould size |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 201 cm³ |
| Pressure on material | 2000 bar |
| Platen width | 650 mm |
| Robot interface | euro 67 |
| Number of heating zones | 6 |
| Mould size | 250 |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Shot weight | 183 g |
| Platen length | 650 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Opening of the press | 500 mm |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 392.115 cm³ |
| Pressure on material | 1999.1 bar |
| Platen width | 794 mm |
| Number of cores | 1 |
| Mould size | 250-550 |
| Screw diameter | 50.35 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Shot weight | 359.105 g |
| Platen length | 795 mm |
| Robot interface | |
| Opening of the press | 450 mm |
| Clamping force | 320 T |
|---|---|
| Shot volume | 318 cm³ |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Equipped with robot | No |
| Mould size |
| Clamping force | 220 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 431 cm³ |
| Pressure on material | 4290 bar |
| Platen width | 795 mm |
| Equipped with robot | No |
| Opening of the press | 950 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Shot weight | 392 g |
| Platen length | 795 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Mould size | 300-650 |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 318 cm³ |
| Pressure on material | 2470 bar |
| Platen width | 650 mm |
| Robot interface | euro 12 |
| Number of heating zones | 0 |
| Mould size | 250 |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Shot weight | 291 g |
| Platen length | 650 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 500 mm |
Slovakia
2019
| Screw diameter | 45 mm |
|---|---|
| Pressure on material | 2470 bar |
| Equipped with robot | Yes |
| Mould size |
| Shot weight | 291 g |
|---|---|
| Bi-metal screw | Yes |
| Robot interface |
Slovakia
2018
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot weight | 434 g |
| Platen width | 795 mm |
| Mould size |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Platen length | 795 mm |
| Robot interface |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 270 mm |
| Shot volume | 54 cm³ |
| Pressure on material | 2500 bar |
| Platen width | 275 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 270 mm |
| Shot weight | 95 g |
| Platen length | 250 mm |
| Equipped with robot | No |
| Opening of the press | 300 mm |
Czech Republic
2006
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Equipped with robot | Yes |
| Opening of the press | 900 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 22 mm |
|---|---|
| Pressure on material | 2000 bar |
| Opening of the press | 100 mm |
| Shot weight | 31 g |
|---|---|
| Robot interface | |
| Mould size |
| Clamping force | 150 T |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot weight | 158 g |
| Platen length | 570 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 370 mm |
| Pressure on material | 1390 bar |
| Platen width | 570 mm |
| Opening of the press | 500 mm |
| Clamping force | 60 T |
|---|---|
| Tie bar spacing (H) | 320 mm |
| Shot volume | 121 cm³ |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Pressure on material | 1820 bar |
| Opening of the press | 350 mm |
Czech Republic
1999
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot volume | 182 cm³ |
| Pressure on material | 2120 bar |
| Platen width | 570 mm |
| Equipped with robot | No |
| Number of cores | 1 |
| Opening of the press | 500 mm |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 370 mm |
| Shot weight | 121 g |
| Platen length | 570 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size |
| Clamping force | 80 T |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 100 T |
|---|---|
| Shot volume | 230 cm³ |
| Pressure on material | 1670 bar |
| Opening of the press | 300 mm |
| Screw diameter | 45 mm |
|---|---|
| Shot weight | 194 g |
| Robot interface | |
| Mould size |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Platen length | 400 mm |
| Robot interface | |
| Opening of the press | 325 mm |
| Screw diameter | 30 mm |
|---|---|
| Pressure on material | 1150 bar |
| Platen width | 400 mm |
| Number of heating zones | 4 |
| Mould size |
| Clamping force | 70 T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | 82 cm³ |
| Pressure on material | 2500 bar |
| Platen width | 915 mm |
| Number of cores | |
| Opening of the press | 250 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | 87 g |
| Platen length | 915 mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Shot volume | 20 cm³ |
| Pressure on material | 1290 bar |
| Platen width | 400 mm |
| Robot interface | |
| Opening of the press | 325 mm |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 221 mm |
| Shot weight | 51.1 g |
| Platen length | 400 mm |
| Equipped with robot | No |
| Number of heating zones | 4 |
| Mould size |
Germany
2000
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 474 cm³ |
| Pressure on material | 1650 bar |
| Platen width | 795 mm |
| Number of cores | |
| Opening of the press | 650 mm |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Shot weight | 434 g |
| Platen length | 795 mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 182 cm³ |
| Pressure on material | 1670 bar |
| Platen width | 570 mm |
| Opening of the press | 500 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 166 g |
| Platen length | 570 mm |
| Robot interface | |
| Mould size |
| Clamping force | 30 T |
|---|---|
| Tie bar spacing (H) | 270 mm |
| Shot volume | 49 cm³ |
| Robot interface |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 270 mm |
| Pressure on material | 2240 bar |
| Mould size |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 182 cm³ |
| Pressure on material | 1670 bar |
| Platen width | 570 mm |
| Opening of the press | 500 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 166 g |
| Platen length | 570 mm |
| Robot interface | |
| Mould size |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Platen length | 400 mm |
| Robot interface | |
| Opening of the press | 325 mm |
| Screw diameter | 30 mm |
|---|---|
| Pressure on material | 1150 bar |
| Platen width | 400 mm |
| Number of heating zones | 4 |
| Mould size |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Platen length | 400 mm |
| Robot interface | |
| Opening of the press | 325 mm |
| Screw diameter | 30 mm |
|---|---|
| Pressure on material | 1150 bar |
| Platen width | 400 mm |
| Number of heating zones | 4 |
| Mould size |
Italy
2002
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 50 T |
| Screw diameter | 25 mm |
| Shot volume | 59 cm³ |
| Pressure on material | 2500 bar |
| Platen length | 900 mm |
| Platen width | 900 mm |
| Equipped with robot | No |
| Robot interface | |
| Number of heating zones | 5 |
| Opening of the press | 225 mm |
| Mould size | |
| ------------------- | |
| Length x width x height | 2524.0 × 1480.0 × 3480.0 |
| Weight | 3111 kg |
| length | 2524 mm |
|---|---|
| height | 3530 mm |
| Clamping force | 50 T |
| Shot volume | 59 cm³ |
| Robot interface | |
| Opening of the press | 225 mm |
| width | 1480 mm |
|---|---|
| weight | 3111 kg |
| Screw diameter | 25 mm |
| Pressure on material | 2500 bar |
| Number of heating zones | 5 |
| Mould size |
Romania
Poland
Spain
EN
- Languages
English (GB)
English (US)
Français
Čeština
Español
Deutsch
Italiano
Polski
Русский
Türkçe
Português
Magyar
Hrvatski
Български
Nederlands
Ελληνικά
Dansk
Svenska
Română
Crpski
Lietuvių