Contact us to receive an offer.
| Manufacturer | Arburg GmbH |
|---|---|
| Model | Allrounder 370C 800-250 |
| Year | 1999 |
| Location | Czech Republic
|
This Arburg GmbH Allrounder 370C 800-250 injection moulding machine, manufactured in 1999, offers a clamping force of 80 tons (800 kN) and weighs approximately 3180 kg. The machine features a screw diameter of 35 mm and tie bar spacing of 370 mm both horizontally and vertically. It is designed with a single core and does not include a bi-metal screw or robot equipment.
The machine is equipped with a hydraulic injection unit, including a large metal hopper for feeding material, visible hydraulic lines, and multiple hydraulic hoses connected to the injection unit. The injection barrel and nozzle area have a turquoise housing with some surface wear and minor paint chipping but no visible cracks or damage. A warning label indicates hot surfaces on the injection barrel housing for safety.
The clamping unit includes two large tie bars and platen plates, with platen surfaces showing minor wear and some dirt but no visible damage. A yellow protective door and safety guard frame are installed for operator safety. The machine also has an emergency stop button and warning light mounted on top.
The control panel features a screen displaying machine data such as the serial number, cycle count, pump hours, and automatic operation hours, with multiple buttons below the screen for operation control. The machine operates on a 400V three-phase power supply, with heating power of 6.5 kW and a pump motor rated at 15 kW, totaling a connected load of 21.5 kW.
Overall, the machine appears clean and in good physical condition with minor signs of use. It is located approximately 40 km from Brno.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Injection press in very good condition, few operating hours. Location 40 km from Brno.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Arburg GmbH Allrounder 370C 800-250 manufactured?
This Arburg GmbH Allrounder 370C 800-250 injection molding machine was manufactured in 1999.
What is the clamping force of the machine?
This injection molding machine has a clamping force of 800 kN.
What is the shot weight of this model?
This Arburg GmbH Allrounder 370C 800-250 features a shot weight of 250 grams.
What types of materials can this equipment process?
This equipment is capable of processing a variety of thermoplastic materials.
Is the machine currently available for inspection?
The machine is available for inspection under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Sept. 17, 2026 |
Injection press in very good condition, few operating hours. Location 40 km from Brno.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this Arburg GmbH Allrounder 370C 800-250 manufactured?
This Arburg GmbH Allrounder 370C 800-250 injection molding machine was manufactured in 1999.
What is the clamping force of the machine?
This injection molding machine has a clamping force of 800 kN.
What is the shot weight of this model?
This Arburg GmbH Allrounder 370C 800-250 features a shot weight of 250 grams.
What types of materials can this equipment process?
This equipment is capable of processing a variety of thermoplastic materials.
Is the machine currently available for inspection?
The machine is available for inspection under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Arburg GmbH Allrounder 370C 800-250 injection moulding machine, manufactured in 1999, offers a clamping force of 80 tons (800 kN) and weighs approximately 3180 kg. The machine features a screw diameter of 35 mm and tie bar spacing of 370 mm both horizontally and vertically. It is designed with a single core and does not include a bi-metal screw or robot equipment.
The machine is equipped with a hydraulic injection unit, including a large metal hopper for feeding material, visible hydraulic lines, and multiple hydraulic hoses connected to the injection unit. The injection barrel and nozzle area have a turquoise housing with some surface wear and minor paint chipping but no visible cracks or damage. A warning label indicates hot surfaces on the injection barrel housing for safety.
The clamping unit includes two large tie bars and platen plates, with platen surfaces showing minor wear and some dirt but no visible damage. A yellow protective door and safety guard frame are installed for operator safety. The machine also has an emergency stop button and warning light mounted on top.
The control panel features a screen displaying machine data such as the serial number, cycle count, pump hours, and automatic operation hours, with multiple buttons below the screen for operation control. The machine operates on a 400V three-phase power supply, with heating power of 6.5 kW and a pump motor rated at 15 kW, totaling a connected load of 21.5 kW.
Overall, the machine appears clean and in good physical condition with minor signs of use. It is located approximately 40 km from Brno.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Sept. 17, 2026 |
Машина за леене под налягане Arburg GmbH Allrounder 370C 800-250
Arburg 370C 800-250
Arburg GmbH Allrounder 370C 800-250 Sprøjtestøbemaskine
Arburg GmbH Allrounder 370C 800-250 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Arburg GmbH Allrounder 370C 800-250
Arburg GmbH Allrounder 370C 800-250 Injection moulding machine
Inyectora de plástico Arburg GmbH Allrounder 370C 800-250
Presse à injecter Arburg GmbH Allrounder 370C 800-250
Stroj za injekcijsko prešanje Arburg GmbH Allrounder 370C 800-250
Arburg GmbH Allrounder 370C 800-250 Fröccsöntő gép
Pressa ad iniezione Arburg GmbH Allrounder 370C 800-250
Įpurškimo formavimo mašina Arburg GmbH Allrounder 370C 800-250
Arburg GmbH Allrounder 370C 800-250 Spuitgietmachine
Wtryskarka Arburg GmbH Allrounder 370C 800-250
Máquina de injecção Arburg GmbH Allrounder 370C 800-250
Mașină de turnat prin injecție Arburg GmbH Allrounder 370C 800-250
Arburg GmbH Allrounder 370C 800-250 Термопластавтомат
Mašina za brizganje Arburg GmbH Allrounder 370C 800-250
Arburg GmbH Allrounder 370C 800-250 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Arburg GmbH Allrounder 370C 800-250
EN
- Languages
English (GB)