Contact us to receive an offer.
| Manufacturer | DEMAG |
|---|---|
| Model | MULTI 200T 560-610H/120R |
| Year | 2005 |
| Location | France
|
This listing is for a DEMAG MULTI 200T 560-610H/120R injection moulding machine, manufactured in 2005. The machine features a tie bar spacing of 560 mm both horizontally and vertically, providing a substantial clamping area suitable for a variety of mould sizes. It has a screw diameter of 45.0 mm and a shot volume of 323.0 cm³, allowing for efficient injection of plastic material. The machine operates with a pressure on material of up to 2000 bar, ensuring high-quality moulding performance.
The machine is equipped with a protective enclosure that includes a transparent window, enhancing safety while allowing operator visibility during operation. The casing of the machine is primarily white and blue, showing some scratches and wear marks consistent with industrial use, indicating it has been previously operated.
Control is managed via an NC 4 system, facilitating precise control over the injection process. The clamping system is designed to accommodate moulds with dimensions up to 560 x 560 mm between the tie bars. The injection screw length is specified as 20 times the screw diameter, providing adequate plasticizing capacity.
This DEMAG injection moulding machine is suitable for various plastic manufacturing applications where reliability and precision are required. Please note that while the machine shows signs of use, no explicit information about operational testing or refurbishment is provided. Potential buyers are encouraged to inquire further about the machine's current operational status and maintenance history.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
TECHNICAL SPECIFICATIONS
Machine: DEMAG MULTI 200T 560-610H/120R WITH G2 GROSFILLEY BASE YEAR 2005
Year : 2005
Type of control : NC 4
Number of hours : 34000H
Closing
Between columns : 560x560 mm
Injection :
Screw diameter: 25/45mm
Screw length: 20 D
cm3: 61/323
Bars: 2000/1973
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 53 |
| Last activity | Nov. 3, 2026 |
TECHNICAL SPECIFICATIONS
Machine: DEMAG MULTI 200T 560-610H/120R WITH G2 GROSFILLEY BASE YEAR 2005
Year : 2005
Type of control : NC 4
Number of hours : 34000H
Closing
Between columns : 560x560 mm
Injection :
Screw diameter: 25/45mm
Screw length: 20 D
cm3: 61/323
Bars: 2000/1973
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a DEMAG MULTI 200T 560-610H/120R injection moulding machine, manufactured in 2005. The machine features a tie bar spacing of 560 mm both horizontally and vertically, providing a substantial clamping area suitable for a variety of mould sizes. It has a screw diameter of 45.0 mm and a shot volume of 323.0 cm³, allowing for efficient injection of plastic material. The machine operates with a pressure on material of up to 2000 bar, ensuring high-quality moulding performance.
The machine is equipped with a protective enclosure that includes a transparent window, enhancing safety while allowing operator visibility during operation. The casing of the machine is primarily white and blue, showing some scratches and wear marks consistent with industrial use, indicating it has been previously operated.
Control is managed via an NC 4 system, facilitating precise control over the injection process. The clamping system is designed to accommodate moulds with dimensions up to 560 x 560 mm between the tie bars. The injection screw length is specified as 20 times the screw diameter, providing adequate plasticizing capacity.
This DEMAG injection moulding machine is suitable for various plastic manufacturing applications where reliability and precision are required. Please note that while the machine shows signs of use, no explicit information about operational testing or refurbishment is provided. Potential buyers are encouraged to inquire further about the machine's current operational status and maintenance history.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 53 |
| Last activity | Nov. 3, 2026 |
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 442 cm³ |
| Platen length | 830 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 575 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Pressure on material | 1940 bar |
| Platen width | 830 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size |
| Clamping force | 350 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 1212 cm³ |
| Pressure on material | 1877 bar |
| Platen width | 1100 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size | 380 |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 1090 g |
| Platen length | 1200 mm |
| Bi-metal screw | No |
| Robot interface | Euromap E 67 |
| Opening of the press | 710 mm |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | 1212 cm³ |
| Platen length | 1200 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 825 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Pressure on material | 1877 bar |
| Platen width | 1200 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Mould size | 770 |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 763 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1905 bar |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size | 380/820 mm |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot volume | 763 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1905 bar |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 442 cm³ |
| Robot interface |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Pressure on material | 1946 bar |
| Mould size |
| Clamping force | 330 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot volume | 763 cm³ |
| Pressure on material | 1905 bar |
| Platen width | 950 mm |
| Robot interface | |
| Number of heating zones | 3 |
| Mould size | 330/710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Shot weight | g |
| Platen length | 1040 mm |
| Bi-metal screw | No |
| Number of cores | 3 |
| Opening of the press | 675 mm |
| Clamping force | 280 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 1212 cm³ |
| Platen length | 930 mm |
| Bi-metal screw | Yes |
| Robot interface | hydraulic |
| Opening of the press | 710 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Pressure on material | 1877 bar |
| Platen width | 930 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size | 675 |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot volume | 52 cm³ |
| Pressure on material | 2180 bar |
| Platen width | 570 mm |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 370 mm |
| Shot weight | 46 g |
| Platen length | 520 mm |
| Robot interface |
| Clamping force | 280 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 231 cm³ |
| Pressure on material | 2423 bar |
| Platen width | 1505 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 675 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Shot weight | 210 g |
| Platen length | 1385 mm |
| Bi-metal screw | Yes |
| Robot interface | OUI |
| Number of heating zones | 10 |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 323 cm³ |
| Platen length | 750 mm |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Pressure on material | 1973 bar |
| Platen width | 750 mm |
| Mould size |
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 168 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 450 mm |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Pressure on material | 2640 bar |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size |
Czech Republic
2006
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot volume | 891 cm³ |
| Pressure on material | 2420 bar |
| Platen width | 1100 mm |
| Mould size |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 800 g |
| Platen length | 1200 mm |
| Robot interface |
France
2003
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 323 cm³ |
| Pressure on material | 1973 bar |
| Platen width | 750 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Opening of the press | 500 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Shot weight | 290 g |
| Platen length | 750 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 250/560 |
| Clamping force | 450 T |
|---|---|
| Tie bar spacing (H) | 920 mm |
| Shot volume | 1212 cm³ |
| Pressure on material | 2420 bar |
| Platen width | 1300 mm |
| Equipped with robot | No |
| Number of cores | 0 |
| Opening of the press | 860 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 920 mm |
| Shot weight | 885 g |
| Platen length | 1300 mm |
| Bi-metal screw | Yes |
| Robot interface | NON |
| Number of heating zones | 0 |
| Mould size |
| Clamping force | 210 T |
|---|---|
| Tie bar spacing (H) | 580 mm |
| Shot volume | 442 cm³ |
| Platen length | 860 mm |
| Robot interface | |
| Mould size | 340 |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 580 mm |
| Pressure on material | 1946 bar |
| Platen width | 860 mm |
| Opening of the press | 575 mm |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 442 cm³ |
| Platen length | 830 mm |
| Robot interface | |
| Number of heating zones | 9 |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Pressure on material | 1946 bar |
| Platen width | 830 mm |
| Number of cores | 1 |
| Opening of the press | 575 mm |
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 168 cm³ |
| Platen length | 600 mm |
| Robot interface | EUROMAP |
| Opening of the press | 450 mm |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Pressure on material | 2020 bar |
| Platen width | 600 mm |
| Number of cores | 1 |
| Mould size |
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | cm³ |
| Pressure on material | 1855 bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | 770 mm |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1400 mm |
| Shot volume | 4372 cm³ |
| Platen length | 1950 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 110 mm |
|---|---|
| Tie bar spacing (V) | 1120 mm |
| Shot weight | 3930 g |
| Platen width | 1670 mm |
| Number of cores | 4 |
France
2001
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 1039 cm³ |
| Platen length | 1200 mm |
| Robot interface |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1450 bar |
| Platen width | 1100 mm |
| Mould size |
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1400 mm |
| Shot volume | 4372 cm³ |
| Pressure on material | 1815 bar |
| Platen width | 1670 mm |
| Mould size |
| Screw diameter | 110 mm |
|---|---|
| Tie bar spacing (V) | 1120 mm |
| Shot weight | 3930 g |
| Platen length | 1950 mm |
| Robot interface |
United Kingdom
2002
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1400 mm |
| Pressure on material | 1815 bar |
| Platen width | 1950 mm |
| Opening of the press | 1250 mm |
| Screw diameter | 110 mm |
|---|---|
| Tie bar spacing (V) | 1120 mm |
| Platen length | 1670 mm |
| Robot interface | |
| Mould size |
| Clamping force | 210 T |
|---|---|
| Tie bar spacing (H) | 580 mm |
| Shot volume | 442 cm³ |
| Pressure on material | 1946 bar |
| Platen width | 860 mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | 575 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 580 mm |
| Shot weight | 402 g |
| Platen length | 860 mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 110 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Robot interface | euromap 12 |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Mould size |
United Kingdom
2013
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Robot interface |
| Tie bar spacing (H) | 520 mm |
|---|---|
| Shot weight | 402 g |
| Mould size |
| Clamping force | 3500 T |
|---|---|
| Tie bar spacing (H) | 830 mm |
| Platen width | 1144 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 830 mm |
| Equipped with robot | Yes |
| Opening of the press | 725 mm |
Машина за леене под налягане DEMAG MULTI 200T 560-610H/120R
Vstřikolis DEMAG MULTI 200T 560-610H/120R
DEMAG MULTI 200T 560-610H/120R Sprøjtestøbemaskine
DEMAG MULTI 200T 560-610H/120R Spritzgießmaschine
Μηχανή χύτευσης με έγχυση DEMAG MULTI 200T 560-610H/120R
DEMAG MULTI 200T 560-610H/120R Injection moulding machine
Inyectora de plástico DEMAG MULTI 200T 560-610H/120R
Presse à injecter DEMAG MULTI 200T 560-610H/120R
Stroj za injekcijsko prešanje DEMAG MULTI 200T 560-610H/120R
DEMAG MULTI 200T 560-610H/120R Fröccsöntő gép
Pressa ad iniezione DEMAG MULTI 200T 560-610H/120R
Įpurškimo formavimo mašina DEMAG MULTI 200T 560-610H/120R
DEMAG MULTI 200T 560-610H/120R Spuitgietmachine
Wtryskarka DEMAG MULTI 200T 560-610H/120R
Máquina de injecção DEMAG MULTI 200T 560-610H/120R
Mașină de turnat prin injecție DEMAG MULTI 200T 560-610H/120R
DEMAG MULTI 200T 560-610H/120R Термопластавтомат
Mašina za brizganje DEMAG MULTI 200T 560-610H/120R
DEMAG MULTI 200T 560-610H/120R Formsprutningsmaskin
Enjeksiyon kalıplama makinesi DEMAG MULTI 200T 560-610H/120R
Romania
Greece
Spain
Italy
EN
- Languages
English (GB)