Contact us to receive an offer.
| Manufacturer | DEMAG |
|---|---|
| Model | SYSTEM 200/500-610 |
| Year | 2006 |
| Location | Spain
|
This Demag SYSTEM 200/500-610 injection molding machine, manufactured in 2006, is designed for high-performance plastic part production. It features a robust clamping unit with a clamping force of 200 tons (2000 kN), suitable for molds with platen dimensions of 750 x 750 mm. The tie bar spacing measures 500 x 500 mm, allowing for versatile mold installation. The machine supports mold heights ranging from 250 to 560 mm, with a platen distance of 1060 mm.
The injection unit is equipped with a 45 mm diameter screw, offering a shot volume of 323 cm³ and an injection pressure of 1973 bar. It can produce injected parts weighing approximately 290 grams when using polystyrene (PS) material. The machine's overall dimensions are 5200 mm in length, 1600 mm in width, and 2100 mm in height.
The machine is enclosed with transparent windows that provide visibility into the mold area, enhancing operational safety and monitoring. It includes a control panel labeled 'ergo control' and 'Demag NC4,' featuring multiple buttons and a screen for process control. Safety features observed include warning stickers near the injection area and an emergency stop button located on the side panel.
Additional visible components include hydraulic cylinders and flow meters integral to the machine's operation. The injection mechanism is protected by a metal mesh, and an orange hopper is mounted on top for feeding plastic material. Pressure gauges are installed on the side, aiding in monitoring injection parameters.
The exterior shows minor wear, some scratches, and dirt consistent with typical industrial use, while hydraulic rods and metal parts exhibit signs of wear. This machine is suitable for users seeking a reliable Demag injection molding system with comprehensive control and safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Clamping Unit
Clamping force: 2000 kN (200 t)
Plate dimensions: 750 x 750 mm
Distance between columns: 500 x 500 mm
Min–Max mold height: 250–560 mm
Distance between platen: 1060 mm
Injection Unit:
Screw diameter: 45 mm (L/D 20)
Injection pressure: 1973 bar
Injection volume: 323 cm³
Injected part weight: 290 g (PS)
Machine Dimensions: Equipment:
5,200 x 1,600 x 2,100 mm (L-W-H)
Robot Interface E 12
Flow meters
Hydraulic cylinders
Air valves
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 30, 2026 |
Clamping Unit
Clamping force: 2000 kN (200 t)
Plate dimensions: 750 x 750 mm
Distance between columns: 500 x 500 mm
Min–Max mold height: 250–560 mm
Distance between platen: 1060 mm
Injection Unit:
Screw diameter: 45 mm (L/D 20)
Injection pressure: 1973 bar
Injection volume: 323 cm³
Injected part weight: 290 g (PS)
Machine Dimensions: Equipment:
5,200 x 1,600 x 2,100 mm (L-W-H)
Robot Interface E 12
Flow meters
Hydraulic cylinders
Air valves
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Demag SYSTEM 200/500-610 injection molding machine, manufactured in 2006, is designed for high-performance plastic part production. It features a robust clamping unit with a clamping force of 200 tons (2000 kN), suitable for molds with platen dimensions of 750 x 750 mm. The tie bar spacing measures 500 x 500 mm, allowing for versatile mold installation. The machine supports mold heights ranging from 250 to 560 mm, with a platen distance of 1060 mm.
The injection unit is equipped with a 45 mm diameter screw, offering a shot volume of 323 cm³ and an injection pressure of 1973 bar. It can produce injected parts weighing approximately 290 grams when using polystyrene (PS) material. The machine's overall dimensions are 5200 mm in length, 1600 mm in width, and 2100 mm in height.
The machine is enclosed with transparent windows that provide visibility into the mold area, enhancing operational safety and monitoring. It includes a control panel labeled 'ergo control' and 'Demag NC4,' featuring multiple buttons and a screen for process control. Safety features observed include warning stickers near the injection area and an emergency stop button located on the side panel.
Additional visible components include hydraulic cylinders and flow meters integral to the machine's operation. The injection mechanism is protected by a metal mesh, and an orange hopper is mounted on top for feeding plastic material. Pressure gauges are installed on the side, aiding in monitoring injection parameters.
The exterior shows minor wear, some scratches, and dirt consistent with typical industrial use, while hydraulic rods and metal parts exhibit signs of wear. This machine is suitable for users seeking a reliable Demag injection molding system with comprehensive control and safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 30, 2026 |
Шприцмашина DEMAG SYSTEM 200/500-610
Vstřikovací lis DEMAG SYSTEM 200/500-610
DEMAG SYSTEM 200/500-610 Sprøjtestøbemaskine
DEMAG SYSTEM 200/500-610 Spritzgießmaschine
Πρέσα έγχυσης DEMAG SYSTEM 200/500-610
DEMAG SYSTEM 200/500-610 Injection moulding machine
Inyectora DEMAG modelo SYSTEM 200/500- 610
Presse à injecter DEMAG SYSTEM 200/500-610
Stroj za injekcijsko prešanje DEMAG SYSTEM 200/500-610
DEMAG SYSTEM 200/500-610 Fröccsöntőgép
Pressa a iniezione DEMAG SYSTEM 200/500-610
DEMAG SYSTEM 200/500-610 Įpurškimo liejimo staklės
DEMAG SYSTEM 200/500-610 Spuitgietmachine
Wtryskarka DEMAG SYSTEM 200/500-610
Injetora DEMAG SYSTEM 200/500-610
Mașină de injectat DEMAG SYSTEM 200/500-610
DEMAG SYSTEM 200/500-610 Термопластавтомат
Mašina za injekciono prešanje DEMAG SYSTEM 200/500-610
DEMAG SYSTEM 200/500-610 Formsprutningsmaskin
Enjeksiyon makinesi DEMAG SYSTEM 200/500-610
EN
- Languages
English (GB)