Contact us to receive an offer.
| Manufacturer | DEMAG |
|---|---|
| Model | ERGOTECH SYSTEM 1100 |
| Year | 2000 |
| Location | Italy
|
This listing is for a DEMAG ERGOTECH SYSTEM 1100 injection molding machine, model 110/470-200, manufactured in 2000. The machine features a clamping force of 110 tons and a screw diameter of 25 mm. It has tie bar spacing of 470 mm both horizontally and vertically. The press operates hydraulically with a piston closure system and includes two hydraulic jacks and one air blower. The mold thickness capacity is 250 mm, and the moving platen stroke is 600 mm.
The machine is equipped with a DEMAG NC4 control panel, which includes a screen and multiple control buttons, as well as an emergency stop button. The control panel displays various machine settings, including core control for up to 14 cores, pressure, speed, and hydraulic sensor settings. It supports a robot interface via Euromap 12.
Hydraulic units and piping are visible on the top and right side of the machine. The machine area is organized, with cables and hoses properly arranged. Paper documents are attached near the control panel and on the machine base. A fire extinguisher is mounted on the wall near the machine.
The machine appears clean and well-maintained, though some signs of use such as smudges and wear marks are present on the side panel. The control panel screen is active, displaying machine information including CPU and firmware versions, as well as warning messages such as "oil level too low" and "cylinder heating 1/2 OFF," which potential buyers should consider.
This injection molding machine uses hydraulic oil type H46 and does not have accumulators, an inverter pump, magnetic platens, or a rotary table. The installed language for the control system is English. This machine is suitable for bi-injection molding applications and offers a variable pump type for flexible operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Euromap: 1100/470-200; bi-injection press with satellite.
Tonnage: 110
Pump Type: Variable
Screw Diameter Mm A: 25
Theoretical Vol A: 61.3
Screw Diameter Mm B: 22
Theoretical Vol B: 41.8
Working Hours: 47207
Mold Thickness Mm: 250
Moving Platen Stroke Mm: 600
Column Passage Mm: 470 X 470
Robot Interface: Euromap 12
Hydraulic Jacks N: 2
Air Blowers N: 1
Electric Charge: No
Hydraulic Oil: H46
Control Panel Type: NC 4
Accumulators: No
Inverter Pump: No
Closure: Piston
Press: Hydraulic
Installed Language: English Language
Magnetic Platens: No
Rotary Table: No
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 247 |
| Last activity | Oct. 30, 2026 |
Euromap: 1100/470-200; bi-injection press with satellite.
Tonnage: 110
Pump Type: Variable
Screw Diameter Mm A: 25
Theoretical Vol A: 61.3
Screw Diameter Mm B: 22
Theoretical Vol B: 41.8
Working Hours: 47207
Mold Thickness Mm: 250
Moving Platen Stroke Mm: 600
Column Passage Mm: 470 X 470
Robot Interface: Euromap 12
Hydraulic Jacks N: 2
Air Blowers N: 1
Electric Charge: No
Hydraulic Oil: H46
Control Panel Type: NC 4
Accumulators: No
Inverter Pump: No
Closure: Piston
Press: Hydraulic
Installed Language: English Language
Magnetic Platens: No
Rotary Table: No
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a DEMAG ERGOTECH SYSTEM 1100 injection molding machine, model 110/470-200, manufactured in 2000. The machine features a clamping force of 110 tons and a screw diameter of 25 mm. It has tie bar spacing of 470 mm both horizontally and vertically. The press operates hydraulically with a piston closure system and includes two hydraulic jacks and one air blower. The mold thickness capacity is 250 mm, and the moving platen stroke is 600 mm.
The machine is equipped with a DEMAG NC4 control panel, which includes a screen and multiple control buttons, as well as an emergency stop button. The control panel displays various machine settings, including core control for up to 14 cores, pressure, speed, and hydraulic sensor settings. It supports a robot interface via Euromap 12.
Hydraulic units and piping are visible on the top and right side of the machine. The machine area is organized, with cables and hoses properly arranged. Paper documents are attached near the control panel and on the machine base. A fire extinguisher is mounted on the wall near the machine.
The machine appears clean and well-maintained, though some signs of use such as smudges and wear marks are present on the side panel. The control panel screen is active, displaying machine information including CPU and firmware versions, as well as warning messages such as "oil level too low" and "cylinder heating 1/2 OFF," which potential buyers should consider.
This injection molding machine uses hydraulic oil type H46 and does not have accumulators, an inverter pump, magnetic platens, or a rotary table. The installed language for the control system is English. This machine is suitable for bi-injection molding applications and offers a variable pump type for flexible operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 247 |
| Last activity | Oct. 30, 2026 |
Машина за леене под налягане DEMAG ERGOTECH SYSTEM 1100
Vstřikolis DEMAG ERGOTECH SYSTEM 1100
DEMAG ERGOTECH SYSTEM 1100 Sprøjtestøbemaskine
DEMAG ERGOTECH SYSTEM 1100 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση DEMAG ERGOTECH SYSTEM 1100
DEMAG ERGOTECH SYSTEM 1100 Injection moulding machine
Inyectora de plástico DEMAG ERGOTECH SYSTEM 1100
Presse à injecter DEMAG ERGOTECH SYSTEM 1100
Stroj za injekcijsko prešanje DEMAG ERGOTECH SYSTEM 1100
DEMAG ERGOTECH SYSTEM 1100 Fröccsöntő gép
Pressa ad iniezione DEMAG ERGOTECH SYSTEM 1100
Įpurškimo formavimo mašina DEMAG ERGOTECH SYSTEM 1100
DEMAG ERGOTECH SYSTEM 1100 Spuitgietmachine
Wtryskarka DEMAG ERGOTECH SYSTEM 1100
Máquina de injecção DEMAG ERGOTECH SYSTEM 1100
Mașină de turnat prin injecție DEMAG ERGOTECH SYSTEM 1100
DEMAG ERGOTECH SYSTEM 1100 Термопластавтомат
Mašina za brizganje DEMAG ERGOTECH SYSTEM 1100
DEMAG ERGOTECH SYSTEM 1100 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi DEMAG ERGOTECH SYSTEM 1100
EN
- Languages
English (GB)