| Manufacturer | ITS Benda |
|---|---|
| Model | - |
| Year | 2012 |
| Location | Czech Republic
|
Summary
This slitting / cut-to-length line is described with the following input and output material ranges and production parameters. No information about included accessories, optional equipment, or the machine condition is specified in the provided description.
Input material ranges and coil parameters
- Thickness: 0.4–3.0 mm
- Width: 500–1600 mm
- Supported coil inner diameters: 500 mm or 600 mm
- Coil outer diameter: minimum 700 mm, maximum 1800 mm
- Material yield strength range: 220–640 MPa
- Maximum input coil weight: 22 t
Output material and coils
- Slit strip (band) widths: 21–1600 mm
- Output coil inner diameter: 500 mm
- Output coil outer diameter: 550–1800 mm
- Output coil weight: 22 t
Number of slit strips (cuts) at material yield strength up to 360 MPa
- For strip thickness up to 0.4 mm: up to 29 cuts
- For strip thickness up to 1.0 mm: up to 25 cuts
- For strip thickness up to 1.5 mm: up to 21 cuts
- For strip thickness up to 2.0 mm: up to 17 cuts
- For strip thickness up to 2.5 mm: up to 13 cuts
- For strip thickness up to 3.0 mm: up to 11 cuts
Notes
All values above are taken from the supplied specification. No additional technical details (electrical power, motor ratings, control system, drive layout, or documented machine condition) were provided. If you require confirmation of condition, tooling, available accessories, or operational testing, request that information from the seller before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Input material:
0.4-3.0mm
500-1600mm
coil inner diameter 500/600mm
coil outer diameter min=700mm; max=1800mm
yield strength 220MPa-640MPa
maximum input coil weight 22t
Output material:
band width 21mm-1600mm
inner diameter 500mm
outer diameter 550-1800mm
weight 22t
number of cuts at strength up to 360MPa:
up to 0.4mm = 29
up to 1mm = 25
up to 1.5mm = 21
up to 2mm = 17
up to 2.5mm = 13
up to 3mm = 11
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What material thickness and working width does this ITS Benda longitudinal slitting line handle?
This ITS Benda longitudinal slitting line is specified as 3 mm/1,600 mm.
When was this ITS Benda longitudinal slitting line manufactured?
This ITS Benda longitudinal slitting line has a 3 mm/1600 mm specification and was manufactured in 2012.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2016 |
| Offers online | 2 |
| Last activity | Nov. 4, 2026 |
Input material:
0.4-3.0mm
500-1600mm
coil inner diameter 500/600mm
coil outer diameter min=700mm; max=1800mm
yield strength 220MPa-640MPa
maximum input coil weight 22t
Output material:
band width 21mm-1600mm
inner diameter 500mm
outer diameter 550-1800mm
weight 22t
number of cuts at strength up to 360MPa:
up to 0.4mm = 29
up to 1mm = 25
up to 1.5mm = 21
up to 2mm = 17
up to 2.5mm = 13
up to 3mm = 11
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What material thickness and working width does this ITS Benda longitudinal slitting line handle?
This ITS Benda longitudinal slitting line is specified as 3 mm/1,600 mm.
When was this ITS Benda longitudinal slitting line manufactured?
This ITS Benda longitudinal slitting line has a 3 mm/1600 mm specification and was manufactured in 2012.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Summary
This slitting / cut-to-length line is described with the following input and output material ranges and production parameters. No information about included accessories, optional equipment, or the machine condition is specified in the provided description.
Input material ranges and coil parameters
- Thickness: 0.4–3.0 mm
- Width: 500–1600 mm
- Supported coil inner diameters: 500 mm or 600 mm
- Coil outer diameter: minimum 700 mm, maximum 1800 mm
- Material yield strength range: 220–640 MPa
- Maximum input coil weight: 22 t
Output material and coils
- Slit strip (band) widths: 21–1600 mm
- Output coil inner diameter: 500 mm
- Output coil outer diameter: 550–1800 mm
- Output coil weight: 22 t
Number of slit strips (cuts) at material yield strength up to 360 MPa
- For strip thickness up to 0.4 mm: up to 29 cuts
- For strip thickness up to 1.0 mm: up to 25 cuts
- For strip thickness up to 1.5 mm: up to 21 cuts
- For strip thickness up to 2.0 mm: up to 17 cuts
- For strip thickness up to 2.5 mm: up to 13 cuts
- For strip thickness up to 3.0 mm: up to 11 cuts
Notes
All values above are taken from the supplied specification. No additional technical details (electrical power, motor ratings, control system, drive layout, or documented machine condition) were provided. If you require confirmation of condition, tooling, available accessories, or operational testing, request that information from the seller before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2016 |
| Offers online | 2 |
| Last activity | Nov. 4, 2026 |
| Type | Cut to length |
|---|---|
| Line speed | 40 m/min |
| Internal diameter | 810 mm |
| Thickness of coil plate | 3 mm |
|---|---|
| Coil weight | 28000 kg |
| External diameter | 1800 mm |
| Type | Slitting |
|---|---|
| External diameter | 610 mm |
| Internal diameter | 2000 mm |
|---|
Netherlands
2015
Czech Republic
2001
| Type | Slitting |
|---|
| Thickness of coil plate | 1 mm |
|---|---|
| Coil weight | 5000 kg |
| Line speed | 50 m/min |
|---|
| Type | Slitting |
|---|---|
| Line speed | 150 m/min |
| Thickness of coil plate | 2.5 mm |
|---|
| Type | Cut to length |
|---|---|
| Line speed | 50 m/min |
| Thickness of coil plate | 3 mm |
|---|
Turkey
2007
| Type | Cut to length |
|---|---|
| Coil weight | 20000 kg |
| Thickness of coil plate | 3 mm |
|---|
Lithuania
2013
Czech Republic
2014
| Type | |
|---|---|
| Line speed | m/min |
| Internal diameter | mm |
| Thickness of coil plate | 1 mm |
|---|---|
| Coil weight | kg |
| External diameter | mm |
| Thickness of coil plate | 4 mm |
|---|
| Coil weight | 20000 kg |
|---|
Turkey
2015
| Type | Cut to length |
|---|
| Thickness of coil plate | 10 mm |
|---|
| Thickness of coil plate | 2 mm |
|---|
| Coil weight | 5000 kg |
|---|
Belgium
| Type | Cut to length |
|---|---|
| Coil weight | 5000 kg |
| Thickness of coil plate | 2 mm |
|---|
| Thickness of coil plate | 1000 mm |
|---|
Turkey
2004
| Type | Cut to length |
|---|---|
| Coil weight | 30000 kg |
| Thickness of coil plate | 6 mm |
|---|
Turkey
2004
| Type | Slitting |
|---|
| Thickness of coil plate | 3 mm |
|---|
Czech Republic
1955
| Type | Slitting |
|---|---|
| Line speed | m/min |
| Internal diameter | mm |
| Thickness of coil plate | mm |
|---|---|
| Coil weight | kg |
| External diameter | mm |
Czech Republic
| Thickness of coil plate | 3 mm |
|---|
| Coil weight | 6000 kg |
|---|
| Type | Slitting |
|---|
| Thickness of coil plate | 6 mm |
|---|
Croatia
2002
| Thickness of coil plate | 4 mm |
|---|---|
| Coil weight | 15000 kg |
| Line speed | 60 m/min |
|---|
Czech Republic
2001
Croatia
1987
| Thickness of coil plate | 6 mm |
|---|
| Line speed | 80 m/min |
|---|
South Korea
2010
| Type | Cut to length |
|---|---|
| Line speed | 80 m/min |
| Internal diameter | 508 mm |
| Thickness of coil plate | 3 mm |
|---|---|
| Coil weight | 20000 kg |
| External diameter | 2000 mm |
Подлъжен разделителен знак ITS Benda 3mm/1600mm
Podélná dělicí linka ITS Benda 3mm/1600mm
Langsgående delingslinje ITS Benda 3mm/1600mm
Längsteilungslinie ITS Benda 3mm/1600mm
Μακρόστενη διαχωριστική γραμμή ITS Benda 3mm/1600mm
ITS Benda Longitudinal Divider Line 3mm/1600mm
Línea divisoria longitudinal ITS Benda 3mm/1600mm
Ligne de division longitudinale ITS Benda 3mm/1600mm
Uzdužna razdjelnica ITS Benda 3mm/1600mm
Hosszanti osztóvonal ITS Benda 3mm/1600mm
Linea di taglio longitudinale ITS Benda 3mm/1600mm
Ilgine ITS Benda skirstymo linija 3mm/1600mm
Lengte verdeellijn ITS Benda 3mm/1600mm
Podłużna linia podziału ITS Benda 3mm/1600mm
Linha divisória longitudinal ITS Benda 3mm/1600mm
Linia de separare longitudinală ITS Benda 3mm/1600mm
Продольная разделительная линия ITS Benda 3 мм/1600 мм
Дужа линија за резање ITS Benda 3mm/1600mm
Långsgående dela linje ITS Benda 3mm/1600mm
ITS Benda 3mm/1600mm boyuna kesme hattı
Spain
Poland
Albania
Germany
France
EN
- Languages
English (GB)