205,000 €
Make an offer| Thickness of coil plate | 1 mm |
| Line speed | 50 m/min |
| Coil weight | 5000 kg |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
The Tekmak Trapeze Line is an industrial roll forming machine designed for producing trapezoidal metal sheets, suitable for galvanized, painted, aluminum, and stainless steel materials. Manufactured in 2011, this model is capable of handling coil plates with a thickness of up to 1.0 mm. It operates at a line speed of up to 50 meters per minute, enabling efficient production rates.
This machine can produce trapezoidal sheets in the 27/200 profile form and is adaptable to a sine corrugated line through the use of interchangeable cassettes. It accommodates sheet widths up to 1250 mm and lengths up to 14 meters, with the possibility of extending the maximum length using a simple tool to prevent bending after the weighbridge.
The Tekmak Trapeze Line features a sliding scale system with a weighing capacity of up to 5 tons, which integrates with a sliding conveyor system in the stacking section. This setup facilitates the transfer, strapping, and packaging of materials, readying them for shipment. The machine supports smooth or serrated edges on the produced sheets.
Additional operational features include a minimum automatic retraction length of 1 meter, reverse retraction capability through a rotatable opener, and an automatic hog trolley system that allows direct loading of rolls onto the opener via joystick control. The maximum roll diameter supported is 180 cm, with a maximum roll weight capacity of 15 tons. The machine's maximum material retraction capacity ranges between 30 to 35 tons per day.
From visual inspection, the machine includes multiple metal rollers as part of its forming line, with pneumatic components and hoses integrated near these rollers. The rollers exhibit signs of use, including some surface wear and slight oxidation, which may be expected in a machine of this type and age.
The control system utilizes Siemens software with an Eptim driver, supporting efficient and precise operation of the line.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Tekmak Trapeze Line(GALVANIZED, PAINTED, ALUMINUM, STAINLESS STEEL)
-The machine was installed in 2011 (Tekmak brand).
-It can produce trapezoidal sheets in the 27/200 form with thicknesses ranging from 0.30 mm to 1.00 mm.
-It can be converted to a sine corrugated line with interchangeable cassettes.
-The machine is 40 meters long and can accommodate sheets with a maximum width of 1250 mm.
-Maximum length: 14 meters to prevent bending after the weighbridge (can be extended with a simple tool).
-The edges of the produced material can be either smooth or serrated.
-The machine is equipped with a sliding scale system capable of weighing up to 5 tons.
-The materials in the stacking section are transferred to the scale using a sliding conveyor system, where they are strapped, packaged, and then ready for shipment.
-Maximum speed: 50 meters/min
-Minimum 1 meter automatic retraction
-Reverse retraction (opener can rotate in the reverse direction) available
-Automatic hog trolley system available that can directly load the roll onto the opener using a joystick system.
-Maximum roll diameter that can be loaded onto the machine: 180 cm - 15 tons weight
Maximum material retraction capacity: 30-35 tons per day.
-Siemens software - Eptim driver
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What type of line is this Tekmak Trapeze Line?
This Tekmak Trapeze Line is a cross-cutting line.
When was the unit manufactured?
The unit was manufactured in 2011.
What year was this Tekmak Trapeze Line manufactured?
This Tekmak Trapeze Line was manufactured in 2011.
What configurations are available for this equipment?
This equipment is available in galvanized, painted, aluminum, and stainless steel configurations.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | June 3, 2026 |
Tekmak Trapeze Line(GALVANIZED, PAINTED, ALUMINUM, STAINLESS STEEL)
-The machine was installed in 2011 (Tekmak brand).
-It can produce trapezoidal sheets in the 27/200 form with thicknesses ranging from 0.30 mm to 1.00 mm.
-It can be converted to a sine corrugated line with interchangeable cassettes.
-The machine is 40 meters long and can accommodate sheets with a maximum width of 1250 mm.
-Maximum length: 14 meters to prevent bending after the weighbridge (can be extended with a simple tool).
-The edges of the produced material can be either smooth or serrated.
-The machine is equipped with a sliding scale system capable of weighing up to 5 tons.
-The materials in the stacking section are transferred to the scale using a sliding conveyor system, where they are strapped, packaged, and then ready for shipment.
-Maximum speed: 50 meters/min
-Minimum 1 meter automatic retraction
-Reverse retraction (opener can rotate in the reverse direction) available
-Automatic hog trolley system available that can directly load the roll onto the opener using a joystick system.
-Maximum roll diameter that can be loaded onto the machine: 180 cm - 15 tons weight
Maximum material retraction capacity: 30-35 tons per day.
-Siemens software - Eptim driver
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What type of line is this Tekmak Trapeze Line?
This Tekmak Trapeze Line is a cross-cutting line.
When was the unit manufactured?
The unit was manufactured in 2011.
What year was this Tekmak Trapeze Line manufactured?
This Tekmak Trapeze Line was manufactured in 2011.
What configurations are available for this equipment?
This equipment is available in galvanized, painted, aluminum, and stainless steel configurations.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Thickness of coil plate | 1 mm |
| Line speed | 50 m/min |
| Coil weight | 5000 kg |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
The Tekmak Trapeze Line is an industrial roll forming machine designed for producing trapezoidal metal sheets, suitable for galvanized, painted, aluminum, and stainless steel materials. Manufactured in 2011, this model is capable of handling coil plates with a thickness of up to 1.0 mm. It operates at a line speed of up to 50 meters per minute, enabling efficient production rates.
This machine can produce trapezoidal sheets in the 27/200 profile form and is adaptable to a sine corrugated line through the use of interchangeable cassettes. It accommodates sheet widths up to 1250 mm and lengths up to 14 meters, with the possibility of extending the maximum length using a simple tool to prevent bending after the weighbridge.
The Tekmak Trapeze Line features a sliding scale system with a weighing capacity of up to 5 tons, which integrates with a sliding conveyor system in the stacking section. This setup facilitates the transfer, strapping, and packaging of materials, readying them for shipment. The machine supports smooth or serrated edges on the produced sheets.
Additional operational features include a minimum automatic retraction length of 1 meter, reverse retraction capability through a rotatable opener, and an automatic hog trolley system that allows direct loading of rolls onto the opener via joystick control. The maximum roll diameter supported is 180 cm, with a maximum roll weight capacity of 15 tons. The machine's maximum material retraction capacity ranges between 30 to 35 tons per day.
From visual inspection, the machine includes multiple metal rollers as part of its forming line, with pneumatic components and hoses integrated near these rollers. The rollers exhibit signs of use, including some surface wear and slight oxidation, which may be expected in a machine of this type and age.
The control system utilizes Siemens software with an Eptim driver, supporting efficient and precise operation of the line.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | June 3, 2026 |
Линия за рязане / линия за рязане по дължина Tekmak Trapeze Line
Řezací linka / linka s podélným řezem Tekmak Trapeze Line
Tekmak Trapeze Line Opskæring line / Skær til længde linje
Tekmak Trapeze Line Spaltanlage
Γραμμή κοπής / Γραμμή κοπής σε μήκος Tekmak Trapeze Line
Tekmak Trapeze Line(GALVANIZED, PAINTED, ALUMINUM, STAINLESS STEEL)
Línea de corte transversal Tekmak Trapeze Line
Ligne de refendage Tekmak Trapeze Line
Linija za rezanje / Linija za rezanje na duljinu Tekmak Trapeze Line
Tekmak Trapeze Line Hasítási vonal / Vágás hosszúságú vonalra
Linea di taglio Tekmak Trapeze Line
Pjaustymo linija / Iškirpti iki ilgio linijos Tekmak Trapeze Line
Tekmak Trapeze Line Snijlijn / Op lengte gesneden lijn
Linia wzdłużnego cięcia taśm Tekmak Trapeze Line
Linha de corte / Linha de corte no comprimento Tekmak Trapeze Line
Linie de tăiere / Linie de tăiere la lungime Tekmak Trapeze Line
Tekmak Trapeze Line Линия продольной резки
Linija sečenja / linija sečenja na dužinu Tekmak Trapeze Line
Tekmak Trapeze Line Klipplina / Klipp till längdlinjen
Dilme hattı Tekmak Trapeze Line
EN
- Languages
English (GB)