304,000 € Price is negotiable
Make an offer| Type | Cut to length |
| Thickness of coil plate | 3 mm |
| Line speed | 80 m/min |
| Coil weight | 20000 kg |
| Internal diameter | 508 mm |
| External diameter | 2000 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | in production |
| Last availability date | 09/06/2026 |
This cut-to-length line is manufactured by PACO E.N.G in 2010, designed to process a variety of coil materials including CR, EGI, GI, stainless steel (STS), aluminum (AL), and color-coated coils. It supports coil thicknesses ranging from 0.2 mm up to 3.0 mm, with a maximum coil width of 1,550 mm and a coil weight capacity of up to 20,000 kg. The internal diameter of the coils can be 508 mm or 610 mm, accommodated by rubber sleeves, while the external coil diameter ranges from 800 mm to 2,000 mm.
The line is capable of producing sheets with widths between 300 mm and 1,550 mm. Sheet lengths vary depending on the piler used, with both No. 1 and No. 2 Pilers able to handle lengths from 300 mm to 2,500 mm and pile weights up to 5,000 kg each.
Operational speeds include a line speed of up to 80 m/min and a threading speed up to 20 m/min, with a maximum cutting frequency of 120 cuts per minute. The cutting method utilizes a non-stop running rotary shear, controlled by an AC digital servo system with DC speed and tension control. The line threading direction is from left to right (viewed from the operation side), with a pass line height of floor level plus 1,000 mm.
Power requirements include a main control power supply of AC 440V, 60Hz, 3-phase, and an operation power supply of AC 220V, 60Hz, single-phase. Hydraulic pressure operates normally at 70 kg/cm², with a maximum of 100 kg/cm², while pneumatic pressure is normally 5 kg/cm², with a maximum of 7 kg/cm².
The line composition features multiple components including a paper winder, coil car with coil skid, uncoiler with snubber roll powered by a 15 kW DC motor, drum support, coil opener, three bending rolls driven by a 22 kW DC motor, CPC unit, crop shear, loop table, side guides, pinch rolls, side trimmer with an 11 kW DC motor, scrap baller, semi loop table, a 6-Hi leveler with 19 rolls (Ø44) powered by a 90 kW DC motor, feeder unit, vinyl coater, rotary shear with an AC servo 110 kW motor, run-out conveyor with scrap car, overpass conveyor, two pilers with roller conveyors and table lifts, as well as hydraulic and pneumatic equipment.
Visual inspection confirms the presence of a large metal coil loaded on the uncoiler, which features a purple-painted arm holding the coil securely. The machinery is enclosed with safety fencing incorporating yellow and black mesh for operator protection. The equipment appears clean and well-maintained with no visible damage. The floor and equipment area are orderly and organized. The slitting machine section includes rollers and hydraulic components mounted on a blue-painted frame. Warning labels and instruction sheets are affixed to the machine frame for safety and operational guidance. The uncoiler platform, painted blue with segmented supports for coil placement, shows some wear marks but appears functional. Additional items such as a blue container and a red cart are present near the machine area.
This comprehensive cut-to-length line offers robust capabilities for metal coil processing with advanced control systems and a well-integrated set of components suitable for high-speed, precise cutting operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
1. GENERAL DATA
Manufacturer By PACO E.N.G in 2010
Raw Material CR, EGI, GI, STS, AL, COLOR COATING COILS
Tensile Strength Max. 60Kg/mm2
Coil Thickness Min. 0.2mm ~ Max. 3.0mmT
Coil Width Min. 300mm ~ Max.1,550mm
Coil Weight Max. 20,000Kg
Coil Inside Diameter ∅508mm, ∅610mm = RUBBER SLEEVE
Coil Outside Diameter Min. ∅800mm ~ Max. ∅2,000mm
2. PRODUCT DATA
Sheet Width Min. 300mmW ~ Max.1,550mmW
Sheet Length No. 1 Piler = Min. 300mmL ~ MAX. 2,500mmL
No. 2 Piler = Min. 300mmL ~ MAX. 2,500mmL
Piling Weight No. 1 Piler = Max. 5,000Kg
No. 2 Piler = Max. 5,000Kg
3. LINE DATA
Line Speed: Max. 10 ~ 80m/min
Threading Speed Max. 20m/min
Number of Cut Max. 120 Cuts/min
Speed & Tension Control DC Control
Cutting Method Non-Stop Running Cutting Type by Rotary Shear
Control System AC Digital Servo Control System
Standard of Threading Line Center
Pass Line Height FL + 1,000mm
Line Threading Direction From Left To Right (View Of The Operation Side)
4. POWER SOURCE
Main Control Power AC 440V, 60Hz, 3∅
Operation Power AC 220V, 60Hz, 1∅
Hydraulic Pressure Normal. 70Kg/Cm2
Max. 100Kg/Cm2
Pneumatic Pressure Normal. 5Kg/Cm2
Max. 7Kg/Cm2
5. LINE COMPOSITION
Paper Winder
Coil Car with Coil Skid
Uncoiler with Snubber Roll (DC 15Kw)
Drum Support
Coil Opener
Three (3) Bending Roll (DC 22Kw)
CPC Unit
Crop Shear
Loop Table
No.1 Side Guide
Pinch Roll
Side Trimmer (DC 11Kw)
Scrap Baller
Semi Loop Table
No.2 Side Guide
6-Hi Leveler with Pinch Roll (19-Roll Ф44 DC 90Kw)
Feeder Unit & Vinyl Coater
Rotary Shear (AC Servo 110Kw, REJ)
Run-out Conveyor with Scrap Car
Over Pass Conveyor
No.1 Piler
No.1 Roller Conveyor with Table Lift
No.2 Piler
No.2 Roller Conveyor with Table Lift
Hydraulic Equipment
Pneumatic Equipment
*** Installation, commissioning, and transportation costs excluded ***
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery manufacturer |
| Active since | 2024 |
| Offers online | 3 |
| Last activity | June 11, 2026 |
1. GENERAL DATA
Manufacturer By PACO E.N.G in 2010
Raw Material CR, EGI, GI, STS, AL, COLOR COATING COILS
Tensile Strength Max. 60Kg/mm2
Coil Thickness Min. 0.2mm ~ Max. 3.0mmT
Coil Width Min. 300mm ~ Max.1,550mm
Coil Weight Max. 20,000Kg
Coil Inside Diameter ∅508mm, ∅610mm = RUBBER SLEEVE
Coil Outside Diameter Min. ∅800mm ~ Max. ∅2,000mm
2. PRODUCT DATA
Sheet Width Min. 300mmW ~ Max.1,550mmW
Sheet Length No. 1 Piler = Min. 300mmL ~ MAX. 2,500mmL
No. 2 Piler = Min. 300mmL ~ MAX. 2,500mmL
Piling Weight No. 1 Piler = Max. 5,000Kg
No. 2 Piler = Max. 5,000Kg
3. LINE DATA
Line Speed: Max. 10 ~ 80m/min
Threading Speed Max. 20m/min
Number of Cut Max. 120 Cuts/min
Speed & Tension Control DC Control
Cutting Method Non-Stop Running Cutting Type by Rotary Shear
Control System AC Digital Servo Control System
Standard of Threading Line Center
Pass Line Height FL + 1,000mm
Line Threading Direction From Left To Right (View Of The Operation Side)
4. POWER SOURCE
Main Control Power AC 440V, 60Hz, 3∅
Operation Power AC 220V, 60Hz, 1∅
Hydraulic Pressure Normal. 70Kg/Cm2
Max. 100Kg/Cm2
Pneumatic Pressure Normal. 5Kg/Cm2
Max. 7Kg/Cm2
5. LINE COMPOSITION
Paper Winder
Coil Car with Coil Skid
Uncoiler with Snubber Roll (DC 15Kw)
Drum Support
Coil Opener
Three (3) Bending Roll (DC 22Kw)
CPC Unit
Crop Shear
Loop Table
No.1 Side Guide
Pinch Roll
Side Trimmer (DC 11Kw)
Scrap Baller
Semi Loop Table
No.2 Side Guide
6-Hi Leveler with Pinch Roll (19-Roll Ф44 DC 90Kw)
Feeder Unit & Vinyl Coater
Rotary Shear (AC Servo 110Kw, REJ)
Run-out Conveyor with Scrap Car
Over Pass Conveyor
No.1 Piler
No.1 Roller Conveyor with Table Lift
No.2 Piler
No.2 Roller Conveyor with Table Lift
Hydraulic Equipment
Pneumatic Equipment
*** Installation, commissioning, and transportation costs excluded ***
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Type | Cut to length |
| Thickness of coil plate | 3 mm |
| Line speed | 80 m/min |
| Coil weight | 20000 kg |
| Internal diameter | 508 mm |
| External diameter | 2000 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | in production |
| Last availability date | 09/06/2026 |
This cut-to-length line is manufactured by PACO E.N.G in 2010, designed to process a variety of coil materials including CR, EGI, GI, stainless steel (STS), aluminum (AL), and color-coated coils. It supports coil thicknesses ranging from 0.2 mm up to 3.0 mm, with a maximum coil width of 1,550 mm and a coil weight capacity of up to 20,000 kg. The internal diameter of the coils can be 508 mm or 610 mm, accommodated by rubber sleeves, while the external coil diameter ranges from 800 mm to 2,000 mm.
The line is capable of producing sheets with widths between 300 mm and 1,550 mm. Sheet lengths vary depending on the piler used, with both No. 1 and No. 2 Pilers able to handle lengths from 300 mm to 2,500 mm and pile weights up to 5,000 kg each.
Operational speeds include a line speed of up to 80 m/min and a threading speed up to 20 m/min, with a maximum cutting frequency of 120 cuts per minute. The cutting method utilizes a non-stop running rotary shear, controlled by an AC digital servo system with DC speed and tension control. The line threading direction is from left to right (viewed from the operation side), with a pass line height of floor level plus 1,000 mm.
Power requirements include a main control power supply of AC 440V, 60Hz, 3-phase, and an operation power supply of AC 220V, 60Hz, single-phase. Hydraulic pressure operates normally at 70 kg/cm², with a maximum of 100 kg/cm², while pneumatic pressure is normally 5 kg/cm², with a maximum of 7 kg/cm².
The line composition features multiple components including a paper winder, coil car with coil skid, uncoiler with snubber roll powered by a 15 kW DC motor, drum support, coil opener, three bending rolls driven by a 22 kW DC motor, CPC unit, crop shear, loop table, side guides, pinch rolls, side trimmer with an 11 kW DC motor, scrap baller, semi loop table, a 6-Hi leveler with 19 rolls (Ø44) powered by a 90 kW DC motor, feeder unit, vinyl coater, rotary shear with an AC servo 110 kW motor, run-out conveyor with scrap car, overpass conveyor, two pilers with roller conveyors and table lifts, as well as hydraulic and pneumatic equipment.
Visual inspection confirms the presence of a large metal coil loaded on the uncoiler, which features a purple-painted arm holding the coil securely. The machinery is enclosed with safety fencing incorporating yellow and black mesh for operator protection. The equipment appears clean and well-maintained with no visible damage. The floor and equipment area are orderly and organized. The slitting machine section includes rollers and hydraulic components mounted on a blue-painted frame. Warning labels and instruction sheets are affixed to the machine frame for safety and operational guidance. The uncoiler platform, painted blue with segmented supports for coil placement, shows some wear marks but appears functional. Additional items such as a blue container and a red cart are present near the machine area.
This comprehensive cut-to-length line offers robust capabilities for metal coil processing with advanced control systems and a well-integrated set of components suitable for high-speed, precise cutting operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2024 |
| Offers online | 3 |
| Last activity | June 11, 2026 |
PACO E.N.G Линия за рязане по дължина
PACO E.N.G Linka na řezání na délku
PACO E.N.G Snøre til længde
PACO E.N.G Abgelängte Linie
PACO E.N.G Γραμμή κοπής μήκους PACO E.N.G
PACO E.N.G Cut to length line
PACO E.N.G Línea de corte a medida
PACO E.N.G Ligne de coupe à longueur
PACO E.N.G Linija za rezanje na duljinu
PACO E.N.G. Hosszra vágott vonal
Linea di taglio PACO E.N.G
PACO E.N.G Pjaustymo pagal ilgį linija
PACO E.N.G Op lengte gesneden lijn
PACO E.N.G Linia cięcia na długość
PACO E.N.G Linha de corte à medida
PACO E.N.G Linie de tăiere la lungime
PACO E.N.G Линия для резки по длине
PACO E.N.G Linija za sečenje po dužini
PACO E.N.G Kapa till längd linje
PACO E.N.G Boy kesme hattı
EN
- Languages
English (GB)