205,000 €
Make an offer| Type | Cut to length |
| Thickness of coil plate | 3 mm |
| Line speed | 50 m/min |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
This Tekmak Cut to Length Line, manufactured in 2011, is designed for processing coil materials including galvanized, painted, DKP, aluminum, and stainless steel. It is suitable for coil plates with thicknesses up to 3.0 mm and supports a maximum line speed of 50 meters per minute. The machine can handle material widths up to 1560 mm and has an overall length of approximately 20 meters.
The system allows cutting materials into stacks up to 4 meters long. For materials narrower than 1500 mm, length adjustments can be made manually by pulling from the lower arms. A lob pit with a shaft length of 6 meters is integrated into the setup.
At the stack exit, there is a sliding chain weighbridge system capable of supporting loads up to 5 tons. The machine can accommodate coils with a maximum diameter of 180 cm. A hog cart system is included, capable of lifting up to 15 tons, and features an automatic mechanism operated via joystick to attach coils directly to the decoiler.
The line is capable of processing a maximum of 90 tons of thick material per day. Control and drive systems are Siemens-based, ensuring reliable operation.
Visually, the machine is a large industrial unit featuring Tekmak branding on its front panel. It includes an inclined metal conveyor or feed table leading into the cutting section. Two electric motors are mounted on top of the machine. The equipment and surrounding area appear clean and well-maintained, indicating good overall condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Tekmak Cut-to-Length Line (Galvanized, Painted, DKP, Aluminum, Stainless Steel)
Installation date: 2011
Thickness between 0.25 mm and 3 mm
Maximum width: 1560 mm
Machine length: 20 meter
-Maximum material can be cut into stacks up to 4 meters long. Note: If the material width is under 1500 mm, the material can be cut to the desired length by manual pulling from the lower arms.
-A lob pit with a shaft length of 6 meters is available.
-A speed of up to 50 meters/min.
-A sliding chain weighbridge system with a maximum capacity of 5 tons is available at the stack exit section connected to the machine.
-The maximum coil diameter that can be connected to the machine is 180 cm and a hog cart capable of lifting up to 15 tons is available.
-A hog cart system is available with an automatic system that can directly attach the coil to the decoiler using a joystick.
-A maximum of 90 tons of material (thick material) can be pulled per day.
-Siemens program - Siemens driver
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What materials can this Tekmak Cut-to-Length Line process?
This Tekmak Cut-to-Length Line is capable of processing galvanized, painted, DKP, aluminum, and stainless steel materials.
What year was the unit manufactured?
The unit was manufactured in the year 2011.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | June 3, 2026 |
Tekmak Cut-to-Length Line (Galvanized, Painted, DKP, Aluminum, Stainless Steel)
Installation date: 2011
Thickness between 0.25 mm and 3 mm
Maximum width: 1560 mm
Machine length: 20 meter
-Maximum material can be cut into stacks up to 4 meters long. Note: If the material width is under 1500 mm, the material can be cut to the desired length by manual pulling from the lower arms.
-A lob pit with a shaft length of 6 meters is available.
-A speed of up to 50 meters/min.
-A sliding chain weighbridge system with a maximum capacity of 5 tons is available at the stack exit section connected to the machine.
-The maximum coil diameter that can be connected to the machine is 180 cm and a hog cart capable of lifting up to 15 tons is available.
-A hog cart system is available with an automatic system that can directly attach the coil to the decoiler using a joystick.
-A maximum of 90 tons of material (thick material) can be pulled per day.
-Siemens program - Siemens driver
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What materials can this Tekmak Cut-to-Length Line process?
This Tekmak Cut-to-Length Line is capable of processing galvanized, painted, DKP, aluminum, and stainless steel materials.
What year was the unit manufactured?
The unit was manufactured in the year 2011.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Type | Cut to length |
| Thickness of coil plate | 3 mm |
| Line speed | 50 m/min |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
This Tekmak Cut to Length Line, manufactured in 2011, is designed for processing coil materials including galvanized, painted, DKP, aluminum, and stainless steel. It is suitable for coil plates with thicknesses up to 3.0 mm and supports a maximum line speed of 50 meters per minute. The machine can handle material widths up to 1560 mm and has an overall length of approximately 20 meters.
The system allows cutting materials into stacks up to 4 meters long. For materials narrower than 1500 mm, length adjustments can be made manually by pulling from the lower arms. A lob pit with a shaft length of 6 meters is integrated into the setup.
At the stack exit, there is a sliding chain weighbridge system capable of supporting loads up to 5 tons. The machine can accommodate coils with a maximum diameter of 180 cm. A hog cart system is included, capable of lifting up to 15 tons, and features an automatic mechanism operated via joystick to attach coils directly to the decoiler.
The line is capable of processing a maximum of 90 tons of thick material per day. Control and drive systems are Siemens-based, ensuring reliable operation.
Visually, the machine is a large industrial unit featuring Tekmak branding on its front panel. It includes an inclined metal conveyor or feed table leading into the cutting section. Two electric motors are mounted on top of the machine. The equipment and surrounding area appear clean and well-maintained, indicating good overall condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | June 3, 2026 |
Линия за рязане / линия за рязане по дължина Tekmak Cut to length line
Řezací linka / linka s podélným řezem Tekmak Cut to length line
Tekmak Cut to length line Opskæring line / Skær til længde linje
Tekmak Cut to length line Spaltanlage
Γραμμή κοπής / Γραμμή κοπής σε μήκος Tekmak Cut to length line
Tekmak Cut-to-Length Line (Galvanized, Painted, DKP, Aluminum, Stainless Steel)
Línea de corte transversal Tekmak Cut to length line
Ligne de refendage Tekmak Cut to length line
Linija za rezanje / Linija za rezanje na duljinu Tekmak Cut to length line
Tekmak Cut to length line Hasítási vonal / Vágás hosszúságú vonalra
Linea di taglio Tekmak Cut to length line
Pjaustymo linija / Iškirpti iki ilgio linijos Tekmak Cut to length line
Tekmak Cut to length line Snijlijn / Op lengte gesneden lijn
Linia wzdłużnego cięcia taśm Tekmak Cut to length line
Linha de corte / Linha de corte no comprimento Tekmak Cut to length line
Linie de tăiere / Linie de tăiere la lungime Tekmak Cut to length line
Tekmak Cut to length line Линия продольной резки
Linija sečenja / linija sečenja na dužinu Tekmak Cut to length line
Tekmak Cut to length line Klipplina / Klipp till längdlinjen
Dilme hattı Tekmak Cut to length line
EN
- Languages
English (GB)