Contact us to receive an offer.
| Manufacturer | ŽĎAS, a.s. |
|---|---|
| Model | KoDL 10t - monoblok |
| Year | 2001 |
| Location | Czech Republic
|
This slitting line, model KoDL 10t - monoblok, is manufactured by ŽĎAS, a.s. in 2001. It is designed for longitudinal and transversal coil slitting with an annual capacity of 10,000 tons. The machine processes sheet metal with thickness ranging from 0.4 mm to 2.0 mm and sheet widths from 800 mm to 1,560 mm. It is suitable for cold-rolled and galvanized sheet metal materials. The maximum yield strength it can handle is 480 MPa for sheets up to 1.5 mm thick, while the maximum tensile strength is 250 MPa for the same thickness.
The output parameters for cut sheets include a width tolerance of ±0.1 mm and a length tolerance of ±0.3 mm, both according to ČSN EN 10140 standards. The machine can produce up to six longitudinal strips and five longitudinal cuts for sheets up to 1.5 mm thick. The minimum width of a single strip is 180 mm, with sheet lengths ranging from 200 mm to a maximum of 3,500 mm.
The equipment features a blue-painted industrial frame with a long flat table or conveyor section integrated below the main frame to facilitate material handling. It includes several handwheels for precise adjustments and a coil holder with a feeding mechanism. A yellow safety guard is installed on one side of the machine for operator protection. The machine is equipped with hydraulic or lubrication units and has visible electric cables with chain drag cable carriers for power supply and control.
The slitting line is installed indoors in an industrial workshop environment with concrete flooring and high ceilings. The surrounding area contains various metal parts, pallets, tools, and storage boxes, indicating active use. The machine and its components show signs of wear and use, including some dust and stains on the floor, but appear intact and complete. Control panels and operator stations are present near the machine to facilitate operation. Overall, this slitting line is a robust industrial solution suitable for processing cold-rolled and galvanized sheet metals within the specified parameters.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
LINE FOR LONGITUDINAL AND TRANSVERSAL COIL SLITTING (annual capacity 10,000 t):
Sheet thickness: 0.4 mm to 2.0 mm
Sheet width: 800 mm to 1,560 mm
Material: cold-rolled and galvanized sheet metal
Yield strength: max. 480 MPa (for max. thickness 1.5 mm)
Tensile strength: max. 250 MPa (for max. thickness 1.5 mm)
Output material parameters – cut sheets
Width tolerance: +/- 0.1 mm according to ČSN EN 10140
Length tolerance: +/- 0.3 mm according to ČSN EN 10140
Maximum number of longitudinal strips: 6 (for max. thickness 1.5 mm)
Maximum number of longitudinal cuts: 5 (for max. thickness 1.5 mm)
Minimum width of a single strip: 180 mm
Minimum sheet length: 200 mm
Maximum sheet length: 3500 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | June 10, 2026 |
LINE FOR LONGITUDINAL AND TRANSVERSAL COIL SLITTING (annual capacity 10,000 t):
Sheet thickness: 0.4 mm to 2.0 mm
Sheet width: 800 mm to 1,560 mm
Material: cold-rolled and galvanized sheet metal
Yield strength: max. 480 MPa (for max. thickness 1.5 mm)
Tensile strength: max. 250 MPa (for max. thickness 1.5 mm)
Output material parameters – cut sheets
Width tolerance: +/- 0.1 mm according to ČSN EN 10140
Length tolerance: +/- 0.3 mm according to ČSN EN 10140
Maximum number of longitudinal strips: 6 (for max. thickness 1.5 mm)
Maximum number of longitudinal cuts: 5 (for max. thickness 1.5 mm)
Minimum width of a single strip: 180 mm
Minimum sheet length: 200 mm
Maximum sheet length: 3500 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This slitting line, model KoDL 10t - monoblok, is manufactured by ŽĎAS, a.s. in 2001. It is designed for longitudinal and transversal coil slitting with an annual capacity of 10,000 tons. The machine processes sheet metal with thickness ranging from 0.4 mm to 2.0 mm and sheet widths from 800 mm to 1,560 mm. It is suitable for cold-rolled and galvanized sheet metal materials. The maximum yield strength it can handle is 480 MPa for sheets up to 1.5 mm thick, while the maximum tensile strength is 250 MPa for the same thickness.
The output parameters for cut sheets include a width tolerance of ±0.1 mm and a length tolerance of ±0.3 mm, both according to ČSN EN 10140 standards. The machine can produce up to six longitudinal strips and five longitudinal cuts for sheets up to 1.5 mm thick. The minimum width of a single strip is 180 mm, with sheet lengths ranging from 200 mm to a maximum of 3,500 mm.
The equipment features a blue-painted industrial frame with a long flat table or conveyor section integrated below the main frame to facilitate material handling. It includes several handwheels for precise adjustments and a coil holder with a feeding mechanism. A yellow safety guard is installed on one side of the machine for operator protection. The machine is equipped with hydraulic or lubrication units and has visible electric cables with chain drag cable carriers for power supply and control.
The slitting line is installed indoors in an industrial workshop environment with concrete flooring and high ceilings. The surrounding area contains various metal parts, pallets, tools, and storage boxes, indicating active use. The machine and its components show signs of wear and use, including some dust and stains on the floor, but appear intact and complete. Control panels and operator stations are present near the machine to facilitate operation. Overall, this slitting line is a robust industrial solution suitable for processing cold-rolled and galvanized sheet metals within the specified parameters.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | June 10, 2026 |
Линия за рязане / линия за рязане по дължина ŽĎAS, a.s. KoDL 10t - monoblok
ŽĎAS Linka na podélné a příčné dělení svitků na tabule (roční kapacita cca 10 000 t) včetně odvíječky, automatického ukládacího stolu a navíječky okrajků. (+ možnost skladovacího systému) (2001)
ŽĎAS, a.s. KoDL 10t - monoblok Opskæring line / Skær til længde linje
ŽĎAS, a.s. KoDL 10t - monoblok Spaltanlage
Γραμμή κοπής / Γραμμή κοπής σε μήκος ŽĎAS, a.s. KoDL 10t - monoblok
ŽĎAS, a.s. KoDL 10t - monoblok Slitting line / Cut to length line
Línea de corte transversal ŽĎAS, a.s. KoDL 10t - monoblok
Ligne de refendage ŽĎAS, a.s. KoDL 10t - monoblok
Linija za rezanje / Linija za rezanje na duljinu ŽĎAS, a.s. KoDL 10t - monoblok
ŽĎAS, a.s. KoDL 10t - monoblok Hasítási vonal / Vágás hosszúságú vonalra
Linea di taglio ŽĎAS, a.s. KoDL 10t - monoblok
ŽĎAS, a.s. KoDL 10t - monoblok Pjaustymo linija / Iškirpti iki ilgio linijos
ŽĎAS, a.s. KoDL 10t - monoblok Snijlijn / Op lengte gesneden lijn
Linia wzdłużnego cięcia taśm ŽĎAS, a.s. KoDL 10t - monoblok
Linha de corte / Linha de corte no comprimento ŽĎAS, a.s. KoDL 10t - monoblok
Linie de tăiere / Linie de tăiere la lungime ŽĎAS, a.s. KoDL 10t - monoblok
ŽĎAS, a.s. KoDL 10t - monoblok Линия продольной резки
Linija sečenja / linija sečenja na dužinu ŽĎAS, a.s. KoDL 10t - monoblok
ŽĎAS, a.s. KoDL 10t - monoblok Klipplina / Klipp till längdlinjen
Dilme hattı ŽĎAS, a.s. KoDL 10t - monoblok
EN
- Languages
English (GB)