Stentex Fully Automatic Non-Stop Batcher

USA 1999

Cutting width	3810 mm

Price on request

View product

Kenyon Tenter Frame

USA 1995

1 Kenyon Tenter Range, year 1995, consisting of: A) 3 Parkinson Roll Stands, 144” wide, with Southworth scissor lift, capacity 5000#, B) Birch Brothers Railway Sewing Machine, 160” wide, Serial Number 1984, with a Merrow Model 70-D-3B-2 sewing head, C) Parkinson Turret Unwinder, 160” wide belt, belt driven, with 3 belt surface unwinds D) Menzel Horizontal Accumulator, with conveyor belt, 160” wide x 30’ long E) Tension Bar F) Expander Roll G) Greenville Steel 2-Roll Horizontal Pad, Serial Number 950038-01, 1 roll is stainless steel 15” diameter, 1 roll is rubber covered, 18” diameter, with 2 submergeable rolls in the pan, minimum 10 ton pneumatic pressure, with 200 HP DC motor, 480 volt, 3 phase, 60 cycle, with gear box H) Operators Platform I) Kenyon Pin Tenter Frame, has an over and under entry HOWEVER the rails are side by side throughout the oven. Due to the high-speed capability of this tenter frame there are transition chainwheels instead of bent transitions for the vertical chain arrangement. Frame is 192’ long x max. 210” working width (min. 136”), with overfeed, E&L type 1501 optical guides for rail opening, pin wheel attachments, lubrication system for the chain, pins only, 35’ of entry …

Price on request

View product

Mascoe Coating Machine, Model 5KC

USA 2006

Coating blade: 78 3/4″ wide, year 2006 Guidable end dams Trough conforming end dams Oscillating chemical feed system Chemical level control of trough Four coating positions: Knife over roll Floating knife Knife over gap table Knife over foam table This coater can be used for very technical fabrics or basic fabric type coating. Both thick viscosity and high blow ratio foams are processed using this machine. At the same time very low viscosity chemicals can be processed using the same machine.

Price on request

View product

Inspection Frame / Pernick

USA

Pernick Open Width Inspection Frame, Model TM900A, 72″ fabric width, consisting of: A) Driven cradle let-off, 80” wide, with two 6” diameter covered rolls and two aluminum 3” diameter rolls B) Plastic J Holding Bin, 87” wide C) Driven SS Scroll Roll, 4” diameter x 80” wide D) Felt Covered Feed Roll, 6” diameter x 80” wide E) Felt Covered Feed Roll, 3” diameter x 80” wide F) One Aluminum Beater Roll, 3” diameter x 80” wide G) One Back Light Inspection Board, 89” wide H) One Felt Covered Tension Roll, 5-1/2” diameter x 80” wide I) Two Roll Surface Take-Up, driven, 6” diameter roll x 72” wide J) NEW Edge Guide Control K) Yardage Counter L) D/C Motors (110 volt), for variable speed

Price on request

View product

CST Rotary engraving system

Canada 2007

cst rotary engraving system make: germany model: 2007 designing length: 3050 mm repeat: 64-82-91 printed head: original germany machine has been very slightest used

Price on request

View product

Lawer Colour Kitchen

Canada 2007

01 x colour kitchen make: lawer year: 2007 comprising of complete housing 60 colours dosing system type: rotocolor with working touch panel device, transportation system, ams 90/1 control

Price on request

View product

KURIS Cutty 2317 Z Automated cutting machine

Belarus 2011

Cutty" 2317 Z single-layer automated cutting machine, manufactured by KURIS Spezialmaschinen GmbH, Germany. Designed for cutting textile materials, technical textiles, films, leather, etc. Max. cutting height: 40mm Total length: 3.80m Table width: 2.3m Table working width (Y): 1,75м Table working length (X): 2,3м Operating voltage: 400V, 50/60Hz Controls/drives: 6 kW Vacuum unit: 7.5 kW Compressed air (5-6 bar): 12 l/min

32,000 €

View product

iecho TK4S-2521 Automated cutting machine Hot deal

Russia 2021

The iecho TK4S-2521 cutting complex is capable of making serifs. This equipment is usually equipped with special functions to perform various operations on materials, including cutting, notching and other additional operations necessary to create the final product. We are selling due to the low workload of the plotter.

47,500 €

View product

Used Cutting - automated cutting machines for sale