| Manufacturer | Pernick |
|---|---|
| Model | TM900A |
| Year | |
| Location | USA
|
The Pernick TM900A is an industrial open width inspection frame designed to handle fabric widths up to 72 inches. This robust machine features a driven cradle let-off that is 80 inches wide, equipped with two 6-inch diameter covered rolls and two 3-inch diameter aluminum rolls. It includes a plastic J holding bin measuring 87 inches wide, facilitating smooth fabric handling during inspection.
The machine is also fitted with a driven stainless steel scroll roll, 4 inches in diameter and 80 inches wide, along with two felt-covered feed rolls sized 6 inches and 3 inches in diameter respectively, both 80 inches wide. An aluminum beater roll of 3 inches diameter by 80 inches wide is part of the setup, aiding in fabric processing. Additionally, it has a backlight inspection board that spans 89 inches wide, allowing for thorough fabric examination.
Tension control is managed by a felt-covered tension roll measuring 5.5 inches in diameter and 80 inches wide. The machine also includes two driven roll surface take-ups with 6-inch diameter rolls, each 72 inches wide, to maintain fabric tension and alignment. A new edge guide control system and a yardage counter are integrated for precise operation and measurement.
The Pernick TM900A operates with DC motors at 110 volts, providing variable speed control to suit different fabric types and inspection requirements. The machine is mounted on wooden pallets for floor support.
Visually, the machine has a large green metal frame with multiple rollers, including black and metal rollers arranged horizontally. It has a control panel with buttons, switches, and dials located on the left side, and an electrical cable with a yellow emergency stop button on the right side. The machine shows signs of wear with some rust and dirt accumulation on metal parts but appears structurally intact and suitable for industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Pernick Open Width Inspection Frame, Model TM900A, 72″ fabric width, consisting of:
A) Driven cradle let-off, 80” wide, with two 6” diameter covered rolls and two aluminum 3” diameter rolls
B) Plastic J Holding Bin, 87” wide
C) Driven SS Scroll Roll, 4” diameter x 80” wide
D) Felt Covered Feed Roll, 6” diameter x 80” wide
E) Felt Covered Feed Roll, 3” diameter x 80” wide
F) One Aluminum Beater Roll, 3” diameter x 80” wide
G) One Back Light Inspection Board, 89” wide
H) One Felt Covered Tension Roll, 5-1/2” diameter x 80” wide
I) Two Roll Surface Take-Up, driven, 6” diameter roll x 72” wide
J) NEW Edge Guide Control
K) Yardage Counter
L) D/C Motors (110 volt), for variable speed
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | None |
| Active since | 2008 |
| Offers online | 7 |
| Last activity | June 5, 2025 |
Pernick Open Width Inspection Frame, Model TM900A, 72″ fabric width, consisting of:
A) Driven cradle let-off, 80” wide, with two 6” diameter covered rolls and two aluminum 3” diameter rolls
B) Plastic J Holding Bin, 87” wide
C) Driven SS Scroll Roll, 4” diameter x 80” wide
D) Felt Covered Feed Roll, 6” diameter x 80” wide
E) Felt Covered Feed Roll, 3” diameter x 80” wide
F) One Aluminum Beater Roll, 3” diameter x 80” wide
G) One Back Light Inspection Board, 89” wide
H) One Felt Covered Tension Roll, 5-1/2” diameter x 80” wide
I) Two Roll Surface Take-Up, driven, 6” diameter roll x 72” wide
J) NEW Edge Guide Control
K) Yardage Counter
L) D/C Motors (110 volt), for variable speed
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
The Pernick TM900A is an industrial open width inspection frame designed to handle fabric widths up to 72 inches. This robust machine features a driven cradle let-off that is 80 inches wide, equipped with two 6-inch diameter covered rolls and two 3-inch diameter aluminum rolls. It includes a plastic J holding bin measuring 87 inches wide, facilitating smooth fabric handling during inspection.
The machine is also fitted with a driven stainless steel scroll roll, 4 inches in diameter and 80 inches wide, along with two felt-covered feed rolls sized 6 inches and 3 inches in diameter respectively, both 80 inches wide. An aluminum beater roll of 3 inches diameter by 80 inches wide is part of the setup, aiding in fabric processing. Additionally, it has a backlight inspection board that spans 89 inches wide, allowing for thorough fabric examination.
Tension control is managed by a felt-covered tension roll measuring 5.5 inches in diameter and 80 inches wide. The machine also includes two driven roll surface take-ups with 6-inch diameter rolls, each 72 inches wide, to maintain fabric tension and alignment. A new edge guide control system and a yardage counter are integrated for precise operation and measurement.
The Pernick TM900A operates with DC motors at 110 volts, providing variable speed control to suit different fabric types and inspection requirements. The machine is mounted on wooden pallets for floor support.
Visually, the machine has a large green metal frame with multiple rollers, including black and metal rollers arranged horizontally. It has a control panel with buttons, switches, and dials located on the left side, and an electrical cable with a yellow emergency stop button on the right side. The machine shows signs of wear with some rust and dirt accumulation on metal parts but appears structurally intact and suitable for industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | None |
| Active since | 2008 |
| Offers online | 7 |
| Last activity | June 5, 2025 |
Автоматизирана машина за рязане Pernick TM900A
Automatický řezací stroj Pernick TM900A
Pernick TM900A Automatiseret skæremaskine
Pernick TM900A Schnittautomat
Αυτοματοποιημένη κοπτική μηχανή Pernick TM900A
Inspection Frame / Pernick
Sistema de corte Pernick TM900A
Automate de découpe Pernick TM900A
Automatizirani stroj za rezanje Pernick TM900A
Pernick TM900A Automata vágógép
Macchina da taglio automatica Pernick TM900A
Automatinė pjovimo mašina Pernick TM900A
Pernick TM900A Geautomatiseerde snijmachine
Maszyna automatyczna do cięcia Pernick TM900A
Máquina de corte automatizada Pernick TM900A
Mașină de tăiat automată Pernick TM900A
Pernick TM900A Автоматическая раскройная машина
Automatska mašina za sečenje Pernick TM900A
Pernick TM900A Automatiserad skärmaskin
Otomatik kesim makinesi Pernick TM900A
EN
- Languages
English (GB)