| Manufacturer | Kenyon |
|---|---|
| Model | Tenter Frame |
| Year | 1995 |
| Location | USA
|
This listing is for a Kenyon Tenter Frame manufactured in 1995, designed for high-speed fabric processing with a maximum working width of 210 inches and a length of 192 feet. The frame features an over and under entry with side-by-side rails throughout the oven, equipped with transition chainwheels for vertical chain arrangement. It includes 14 heating zones, each delivering 3,500,000 BTUs via Maxon OvenPak Series 435 natural gas burners, and a 10-foot cooling zone with multiple 30 HP circulating fans. The main drive is powered by a 50 HP single AC inverter motor, enabling a mechanical speed of up to 250 yards per minute. The tenter frame is fitted with E&L type 1501 optical guides for rail opening, pin wheel attachments, and a chain lubrication system.
Additional components include three Parkinson Roll Stands (144 inches wide) with Southworth scissor lifts rated for 5,000 pounds capacity; a Birch Brothers Railway Sewing Machine (160 inches wide) with a Merrow Model 70-D-3B-2 sewing head; Parkinson Turret Unwinder with a 160-inch wide belt and three belt surface unwinds; Menzel Horizontal Accumulator measuring 160 inches wide by 30 feet long; tension bar; expander roll; and a Greenville Steel 2-Roll Horizontal Pad featuring one stainless steel roll (15-inch diameter) and one rubber-covered roll (18-inch diameter), equipped with two submergeable rolls and powered by a 200 HP DC motor.
Other features include an operators platform with yellow metal railings and stairs, a Menzel Compensator (210 inches wide), Parkinson Multi-Knife Score Cut Slitter and Parkinson 4-Roll Automated Batcher (both 210 inches wide), Parkinson Transfer Table, and a computer-controlled frame for electric width control, zone temperature, and airflow monitoring. Mounted above the first zone is an AirTech Thermal Oxidizer rated at 21,000 SCFM.
The machine's control panel is blue with multiple switches, buttons, and meters, including a white box mounted on the front. The panel doors are closed and intact with minor wear. Visible metal components show some wear and rust, with protective metal covers partially shielding shafts. The surrounding floor area is clean with some stains, and the concrete floor shows cracks and discoloration. The tenter frame includes large beige doors with electrical boxes mounted above, which are closed and secured with latches. Overhead lighting and piping are present along the ceiling. Overall, the machine parts show signs of wear and dirt accumulation, consistent with industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
1 Kenyon Tenter Range, year 1995, consisting of:
A) 3 Parkinson Roll Stands, 144” wide, with Southworth scissor lift, capacity 5000#,
B) Birch Brothers Railway Sewing Machine, 160” wide, Serial Number 1984, with a Merrow Model 70-D-3B-2 sewing head,
C) Parkinson Turret Unwinder, 160” wide belt, belt driven, with 3 belt surface unwinds
D) Menzel Horizontal Accumulator, with conveyor belt, 160” wide x 30’ long
E) Tension Bar
F) Expander Roll
G) Greenville Steel 2-Roll Horizontal Pad, Serial Number 950038-01, 1 roll is stainless steel 15” diameter, 1 roll is rubber covered, 18” diameter, with 2 submergeable rolls in the pan, minimum 10 ton pneumatic pressure, with 200 HP DC motor, 480 volt, 3 phase, 60 cycle, with gear box
H) Operators Platform
I) Kenyon Pin Tenter Frame, has an over and under entry HOWEVER the rails are side by side throughout the oven. Due to the high-speed capability of this tenter frame there are transition chainwheels instead of bent transitions for the vertical chain arrangement. Frame is 192’ long x max. 210” working width (min. 136”), with overfeed, E&L type 1501 optical guides for rail opening, pin wheel attachments, lubrication system for the chain, pins only, 35’ of entry before the oven and 7’ exit after the oven, 14 heating zones (140’) and 1 cooling zone (10’), each heating zone is 3,500,000 BTU’s, each zone has standard Maxon OvenPak Series 435 natural gas burner, with 2 circulating fans, 30 HP, 480 volt, 3 phase, 60 cycle, the cooling zone has 4 circulating fans with 4 motors (2 on each side), 30 HP, 480 volt, 3 phase, 60 cycle
J) Main Drive is a 50 HP single AC inverter motor drive
K) Mechanical speed of the tenter frame is 250 yds/min.)
L) Menzel Compensator, 210” wide
M) Parkinson Multi-Knife Score Cut Slitter, 210” wide,
N) Parkinson 4-Roll Automated Batcher, 210” wide,
O) Parkinson Transfer Table,
P) Computer-Controlled Frame, electric width control and monitor, zone temperature control and air flow monitor for CFM
Q) Mounted above the first zone of the tenter housing is an AirTech Thermal Oxidizer, 21,000 SCFM
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | None |
| Active since | 2008 |
| Offers online | 7 |
| Last activity | Sept. 14, 2026 |
1 Kenyon Tenter Range, year 1995, consisting of:
A) 3 Parkinson Roll Stands, 144” wide, with Southworth scissor lift, capacity 5000#,
B) Birch Brothers Railway Sewing Machine, 160” wide, Serial Number 1984, with a Merrow Model 70-D-3B-2 sewing head,
C) Parkinson Turret Unwinder, 160” wide belt, belt driven, with 3 belt surface unwinds
D) Menzel Horizontal Accumulator, with conveyor belt, 160” wide x 30’ long
E) Tension Bar
F) Expander Roll
G) Greenville Steel 2-Roll Horizontal Pad, Serial Number 950038-01, 1 roll is stainless steel 15” diameter, 1 roll is rubber covered, 18” diameter, with 2 submergeable rolls in the pan, minimum 10 ton pneumatic pressure, with 200 HP DC motor, 480 volt, 3 phase, 60 cycle, with gear box
H) Operators Platform
I) Kenyon Pin Tenter Frame, has an over and under entry HOWEVER the rails are side by side throughout the oven. Due to the high-speed capability of this tenter frame there are transition chainwheels instead of bent transitions for the vertical chain arrangement. Frame is 192’ long x max. 210” working width (min. 136”), with overfeed, E&L type 1501 optical guides for rail opening, pin wheel attachments, lubrication system for the chain, pins only, 35’ of entry before the oven and 7’ exit after the oven, 14 heating zones (140’) and 1 cooling zone (10’), each heating zone is 3,500,000 BTU’s, each zone has standard Maxon OvenPak Series 435 natural gas burner, with 2 circulating fans, 30 HP, 480 volt, 3 phase, 60 cycle, the cooling zone has 4 circulating fans with 4 motors (2 on each side), 30 HP, 480 volt, 3 phase, 60 cycle
J) Main Drive is a 50 HP single AC inverter motor drive
K) Mechanical speed of the tenter frame is 250 yds/min.)
L) Menzel Compensator, 210” wide
M) Parkinson Multi-Knife Score Cut Slitter, 210” wide,
N) Parkinson 4-Roll Automated Batcher, 210” wide,
O) Parkinson Transfer Table,
P) Computer-Controlled Frame, electric width control and monitor, zone temperature control and air flow monitor for CFM
Q) Mounted above the first zone of the tenter housing is an AirTech Thermal Oxidizer, 21,000 SCFM
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Kenyon Tenter Frame manufactured in 1995, designed for high-speed fabric processing with a maximum working width of 210 inches and a length of 192 feet. The frame features an over and under entry with side-by-side rails throughout the oven, equipped with transition chainwheels for vertical chain arrangement. It includes 14 heating zones, each delivering 3,500,000 BTUs via Maxon OvenPak Series 435 natural gas burners, and a 10-foot cooling zone with multiple 30 HP circulating fans. The main drive is powered by a 50 HP single AC inverter motor, enabling a mechanical speed of up to 250 yards per minute. The tenter frame is fitted with E&L type 1501 optical guides for rail opening, pin wheel attachments, and a chain lubrication system.
Additional components include three Parkinson Roll Stands (144 inches wide) with Southworth scissor lifts rated for 5,000 pounds capacity; a Birch Brothers Railway Sewing Machine (160 inches wide) with a Merrow Model 70-D-3B-2 sewing head; Parkinson Turret Unwinder with a 160-inch wide belt and three belt surface unwinds; Menzel Horizontal Accumulator measuring 160 inches wide by 30 feet long; tension bar; expander roll; and a Greenville Steel 2-Roll Horizontal Pad featuring one stainless steel roll (15-inch diameter) and one rubber-covered roll (18-inch diameter), equipped with two submergeable rolls and powered by a 200 HP DC motor.
Other features include an operators platform with yellow metal railings and stairs, a Menzel Compensator (210 inches wide), Parkinson Multi-Knife Score Cut Slitter and Parkinson 4-Roll Automated Batcher (both 210 inches wide), Parkinson Transfer Table, and a computer-controlled frame for electric width control, zone temperature, and airflow monitoring. Mounted above the first zone is an AirTech Thermal Oxidizer rated at 21,000 SCFM.
The machine's control panel is blue with multiple switches, buttons, and meters, including a white box mounted on the front. The panel doors are closed and intact with minor wear. Visible metal components show some wear and rust, with protective metal covers partially shielding shafts. The surrounding floor area is clean with some stains, and the concrete floor shows cracks and discoloration. The tenter frame includes large beige doors with electrical boxes mounted above, which are closed and secured with latches. Overhead lighting and piping are present along the ceiling. Overall, the machine parts show signs of wear and dirt accumulation, consistent with industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | None |
| Active since | 2008 |
| Offers online | 7 |
| Last activity | Sept. 14, 2026 |
Автоматизирана машина за рязане Kenyon Tenter Frame
Automatický řezací stroj Kenyon Tenter Frame
Kenyon Tenter Frame Automatiseret skæremaskine
Kenyon Tenter Frame Schnittautomat
Αυτοματοποιημένη κοπτική μηχανή Kenyon Tenter Frame
Kenyon Tenter Frame
Sistema de corte Kenyon Tenter Frame
Automate de découpe Kenyon Tenter Frame
Automatizirani stroj za rezanje Kenyon Tenter Frame
Kenyon Tenter Frame Automata vágógép
Macchina da taglio automatica Kenyon Tenter Frame
Automatinė pjovimo mašina Kenyon Tenter Frame
Kenyon Tenter Frame Geautomatiseerde snijmachine
Maszyna automatyczna do cięcia Kenyon Tenter Frame
Máquina de corte automatizada Kenyon Tenter Frame
Mașină de tăiat automată Kenyon Tenter Frame
Kenyon Tenter Frame Автоматическая раскройная машина
Automatska mašina za sečenje Kenyon Tenter Frame
Kenyon Tenter Frame Automatiserad skärmaskin
Otomatik kesim makinesi Kenyon Tenter Frame
EN
- Languages
English (GB)