Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
Czech Republic
2005
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 520 mm |
| Pressure on material | 1600 bar |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Equipped with robot | Yes |
| Mould size |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 360 mm |
| Mould size |
| Screw diameter | 18 mm |
|---|---|
| Robot interface |
| Clamping force | 120 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 231 cm³ |
| Robot interface |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Pressure on material | 2025 bar |
| Mould size |
| Clamping force | 210 T |
|---|---|
| Tie bar spacing (H) | 580 mm |
| Robot interface |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 580 mm |
| Mould size |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Robot interface |
| Screw diameter | 30 mm |
|---|---|
| Equipped with robot | Yes |
| Mould size |
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Shot weight | 313 g |
| Opening of the press | 500 mm |
Czech Republic
2006
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot volume | 891 cm³ |
| Pressure on material | 2420 bar |
| Platen width | 1100 mm |
| Mould size |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 800 g |
| Platen length | 1200 mm |
| Robot interface |
| Clamping force | 350 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 1212 cm³ |
| Pressure on material | 1877 bar |
| Platen width | 1100 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size | 380 |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 1090 g |
| Platen length | 1200 mm |
| Bi-metal screw | No |
| Robot interface | Euromap E 67 |
| Opening of the press | 710 mm |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | 1212 cm³ |
| Platen length | 1200 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 825 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Pressure on material | 1877 bar |
| Platen width | 1200 mm |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size | 770 |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 763 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1905 bar |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size | 380/820 mm |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot volume | 763 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1905 bar |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 442 cm³ |
| Robot interface |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Pressure on material | 1946 bar |
| Mould size |
| Clamping force | 330 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot volume | 763 cm³ |
| Pressure on material | 1905 bar |
| Platen width | 950 mm |
| Robot interface | |
| Number of heating zones | 3 |
| Mould size | 330/710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Shot weight | g |
| Platen length | 1040 mm |
| Bi-metal screw | No |
| Number of cores | 3 |
| Opening of the press | 675 mm |
| Clamping force | 280 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 1212 cm³ |
| Platen length | 930 mm |
| Bi-metal screw | Yes |
| Robot interface | hydraulic |
| Opening of the press | 710 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Pressure on material | 1877 bar |
| Platen width | 930 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size | 675 |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot volume | 52 cm³ |
| Pressure on material | 2180 bar |
| Platen width | 570 mm |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 370 mm |
| Shot weight | 46 g |
| Platen length | 520 mm |
| Robot interface |
| Clamping force | 280 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 231 cm³ |
| Pressure on material | 2423 bar |
| Platen width | 1505 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 675 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Shot weight | 210 g |
| Platen length | 1385 mm |
| Bi-metal screw | Yes |
| Robot interface | OUI |
| Number of heating zones | 10 |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 323 cm³ |
| Platen length | 750 mm |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Pressure on material | 1973 bar |
| Platen width | 750 mm |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 445 cm³ |
| Pressure on material | 1946 bar |
| Platen width | 1235 mm |
| Opening of the press | 575 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Shot weight | 400 g |
| Platen length | 1235 mm |
| Robot interface | |
| Mould size | 310 - 760 |
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 168 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 450 mm |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Pressure on material | 2640 bar |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size |
Czech Republic
2006
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 800 mm |
| Shot volume | 891 cm³ |
| Pressure on material | 2420 bar |
| Platen width | 1100 mm |
| Mould size |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 800 g |
| Platen length | 1200 mm |
| Robot interface |
France
2003
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 323 cm³ |
| Pressure on material | 1973 bar |
| Platen width | 750 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Opening of the press | 500 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Shot weight | 290 g |
| Platen length | 750 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 250/560 |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 323 cm³ |
| Equipped with robot | No |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Pressure on material | 1973 bar |
| Robot interface |
Slovakia
2006
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot weight | 482 g |
| Bi-metal screw | No |
| Robot interface | |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Pressure on material | 2426 bar |
| Equipped with robot | Yes |
| Opening of the press | 675 mm |
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | cm³ |
| Pressure on material | 1855 bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | 770 mm |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1400 mm |
| Shot volume | 4372 cm³ |
| Platen length | 1950 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 110 mm |
|---|---|
| Tie bar spacing (V) | 1120 mm |
| Shot weight | 3930 g |
| Platen width | 1670 mm |
| Number of cores | 4 |
France
2001
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 810 mm |
| Shot volume | 1039 cm³ |
| Platen length | 1200 mm |
| Robot interface |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1450 bar |
| Platen width | 1100 mm |
| Mould size |
Italy
1996
| Clamping force | 100 T |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 200 T |
| Screw diameter | 50 mm |
| Tie bar spacing (H) | 560 mm |
| Tie bar spacing (V) | 560 mm |
| Shot volume | 442 cm³ |
| Pressure on material | 1940 bar |
| Platen length | 830 mm |
| Platen width | 830 mm |
| Bi-metal screw | Yes |
| Equipped with robot | No |
| Robot interface | |
| Number of cores | 2 |
| Opening of the press | 575 mm |
| Mould size | |
| ------------------- | |
| Length x width x height | 5700.0 × 1700.0 × 2100.0 |
| Weight | 11000 kg |
Romania
Greece
Spain
Turkey
EN
- Languages
English (GB)
English (US)
Français
Čeština
Español
Deutsch
Italiano
Polski
Русский
Türkçe
Português
Magyar
Hrvatski
Български
Nederlands
Ελληνικά
Dansk
Svenska
Română
Crpski
Lietuvių