| Manufacturer | Okuma |
|---|---|
| Model | “Impact” LU-15M |
| Year | 1997 |
| Location | USA
|
This listing is for an Okuma “Impact” LU-15M multispindle automatic lathe, manufactured in 1997. The machine features an 8" 3-jaw chuck mounted on the spindle, suitable for a variety of turning operations. It is equipped with an Okuma OSP7000L CNC control system, providing precise and programmable machining capabilities. The lathe includes live milling functions, enhancing its versatility for complex part production.
The tooling setup consists of a 12-position upper turret and an 8-position lower turret, allowing multiple tools to be mounted and used in sequence. Additional equipment includes a chip conveyor and coolant tank to manage machining debris and cooling needs, as well as a tailstock to support longer workpieces.
Key specifications include a swing over bed of 20.87 inches and a maximum turning diameter of 10.62 inches, with a maximum turning length of 23.62 inches. The X-axis and Z-axis travels are 10.24"/5.51" and 25.20"/24.21" respectively for the upper and lower turrets. The spindle speed can reach up to 4500 RPM, powered by a 29.5 HP motor. Rapid traverse speeds are 590 IPM for the X-axis and 787 IPM for the Z-axis, with fine feedrate control down to 0.0001" per revolution.
The machine measures approximately 156" x 83" x 76" and weighs around 12,000 lbs. Visual inspection shows the lathe bears signs of wear and use, including some paint chipping and discoloration, consistent with typical industrial use. The interior and working areas appear clean but used, with tool holders and slides visible. The control panel with screen and buttons is located on the right side of the machine, while the Okuma brand name is displayed on the left side and the model designation is visible below the control panel.
This Okuma LU-15M lathe is a robust machine designed for demanding multispindle automatic turning applications, suitable for users seeking a capable CNC lathe with live milling functions and comprehensive tooling options.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
EQUIPPED WITH:
8" 3-Jaw Chuck
Okuma OSP7000L CNC Control
Live Milling Capabilities
12 Position Upper & 8 Position Lower Turret
Chip Conveyor - Coolant Tank
Tailstock
CATALOGUE SPECIFICATIONS:
Swing Over Bed ................... 20.87"
Swing Over Carriage .............. 14.96"
Swing Over Cross Slide ........... 12.99"
Maximum Turning Diameter ......... 10.62"
Maximum Turning Length ........... 23.62"
X-Axis Travel (Upper/Lower) ...... 10.24"/5.51"
Z-Axis Travel (Upper/Lower) ...... 25.20"/24.21"
Headstock & Main Spdl Nose ....... JIS-A2-8
Spindle Bore Diameter ............ 3.15"
Spindle Speed Range .............. to 4500 RPM
X-Axis Rapid Traverse Speed ...... 590 IPM
Z-Axis Rapid Traverse Speed ...... 787 IPM
X-Axis Cut Fdrates (IPR) ........ 0.0001"-40000
Z-Axis Cut Fdrates (IPR) ........ 0.0001"-40000
Motor, Horsepower ............... 29.5 HP
Floor Space Req. ................ 156" x 83" x 76"
Weight Approximately ............ 12000 LBS
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 45 |
| Last activity | Oct. 19, 2026 |
EQUIPPED WITH:
8" 3-Jaw Chuck
Okuma OSP7000L CNC Control
Live Milling Capabilities
12 Position Upper & 8 Position Lower Turret
Chip Conveyor - Coolant Tank
Tailstock
CATALOGUE SPECIFICATIONS:
Swing Over Bed ................... 20.87"
Swing Over Carriage .............. 14.96"
Swing Over Cross Slide ........... 12.99"
Maximum Turning Diameter ......... 10.62"
Maximum Turning Length ........... 23.62"
X-Axis Travel (Upper/Lower) ...... 10.24"/5.51"
Z-Axis Travel (Upper/Lower) ...... 25.20"/24.21"
Headstock & Main Spdl Nose ....... JIS-A2-8
Spindle Bore Diameter ............ 3.15"
Spindle Speed Range .............. to 4500 RPM
X-Axis Rapid Traverse Speed ...... 590 IPM
Z-Axis Rapid Traverse Speed ...... 787 IPM
X-Axis Cut Fdrates (IPR) ........ 0.0001"-40000
Z-Axis Cut Fdrates (IPR) ........ 0.0001"-40000
Motor, Horsepower ............... 29.5 HP
Floor Space Req. ................ 156" x 83" x 76"
Weight Approximately ............ 12000 LBS
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for an Okuma “Impact” LU-15M multispindle automatic lathe, manufactured in 1997. The machine features an 8" 3-jaw chuck mounted on the spindle, suitable for a variety of turning operations. It is equipped with an Okuma OSP7000L CNC control system, providing precise and programmable machining capabilities. The lathe includes live milling functions, enhancing its versatility for complex part production.
The tooling setup consists of a 12-position upper turret and an 8-position lower turret, allowing multiple tools to be mounted and used in sequence. Additional equipment includes a chip conveyor and coolant tank to manage machining debris and cooling needs, as well as a tailstock to support longer workpieces.
Key specifications include a swing over bed of 20.87 inches and a maximum turning diameter of 10.62 inches, with a maximum turning length of 23.62 inches. The X-axis and Z-axis travels are 10.24"/5.51" and 25.20"/24.21" respectively for the upper and lower turrets. The spindle speed can reach up to 4500 RPM, powered by a 29.5 HP motor. Rapid traverse speeds are 590 IPM for the X-axis and 787 IPM for the Z-axis, with fine feedrate control down to 0.0001" per revolution.
The machine measures approximately 156" x 83" x 76" and weighs around 12,000 lbs. Visual inspection shows the lathe bears signs of wear and use, including some paint chipping and discoloration, consistent with typical industrial use. The interior and working areas appear clean but used, with tool holders and slides visible. The control panel with screen and buttons is located on the right side of the machine, while the Okuma brand name is displayed on the left side and the model designation is visible below the control panel.
This Okuma LU-15M lathe is a robust machine designed for demanding multispindle automatic turning applications, suitable for users seeking a capable CNC lathe with live milling functions and comprehensive tooling options.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 45 |
| Last activity | Oct. 19, 2026 |
Netherlands
2018
| Max. Ø | 650 mm |
|---|---|
| Type of CNC | OKUMA OSP |
| Spindle speed | 6000 rpm |
| Nbr of spindles | 2 |
|---|---|
| Nbr of axes | 3 |
Germany
2001
| Type of CNC | OSP100L |
|---|
| Type of CNC |
|---|
| Nbr of spindles | 2 |
|---|---|
| Spindle speed | 8000 rpm |
| Type of CNC | Siemens 840 D |
|---|---|
| Spindle power | 8 kW |
USA
2012
| Type of CNC | Fanuc 31i-A |
|---|---|
| Spindle power | 11 kW |
| Spindle speed | 3000 rpm |
|---|
| Max. Ø | 350.012 mm |
|---|---|
| Max. length | 889 mm |
| Nbr of axes | 7 |
| Spindle speed | 3800 rpm |
| Nbr of spindles | 2 |
|---|---|
| Type of CNC | okuma osp p200l |
| Number of tools | 12 |
| Spindle power | 22.37136 kW |
| Max. Ø | 11.0236 mm |
|---|---|
| Type of CNC | |
| Spindle speed | 3200 rpm |
| Max. length | 18.0315 mm |
|---|---|
| Number of tools | 12 |
USA
2005
| Type of CNC | |
|---|---|
| Spindle speed | 4500 rpm |
| Number of tools | 10 |
|---|
| Type of CNC | Fanuc 0i-T-D |
|---|---|
| Spindle power | 20 kW |
| Spindle speed | 600 rpm |
|---|
| Type of CNC | |
|---|---|
| Spindle power | 22 kW |
| Spindle speed | 355000 rpm |
|---|
| Max. Ø | mm |
|---|---|
| Max. length | mm |
| Nbr of axes | |
| Spindle speed | 4500 rpm |
| Nbr of spindles | 2 |
|---|---|
| Type of CNC | Fanuc Oi-TC |
| Number of tools | |
| Spindle power | kW |
USA
2010
| Type of CNC | Fanuc Oi-TC |
|---|
| Spindle speed | 4500 rpm |
|---|
USA
2010
| Type of CNC |
|---|
| Spindle speed | 30 rpm |
|---|
USA
2008
| Type of CNC |
|---|
| Spindle speed | 50 rpm |
|---|
USA
1987
| Max. Ø | mm |
|---|---|
| Max. length | mm |
| Nbr of axes | |
| Spindle speed | 1963027 rpm |
| Nbr of spindles | |
|---|---|
| Type of CNC | |
| Number of tools | |
| Spindle power | kW |
| Type of CNC |
|---|
| Type of CNC | |
|---|---|
| Spindle power | 14.91424 kW |
| Spindle speed | 4500 rpm |
|---|
Многошпинделен автоматичен струг Okuma “Impact” LU-15M
Multivřetenový automatický soustruh Okuma “Impact” LU-15M
Okuma “Impact” LU-15M Multispindlet automatisk drejebænk
Okuma “Impact” LU-15M Automatische Mehrspindel-Drehmaschine
Αυτόματος τόρνος πολλαπλών αξόνων Okuma “Impact” LU-15M
Okuma “Impact” LU-15M
Torno multihusillos automático Okuma “Impact” LU-15M
Tour multibroche Okuma “Impact” LU-15M
Viševreteni automatski strug Okuma “Impact” LU-15M
Okuma “Impact” LU-15M Többorsós automata eszterga
Tornio multimandrino Okuma “Impact” LU-15M
Daugialypės automatinės tekinimo staklės Okuma “Impact” LU-15M
Okuma “Impact” LU-15M Meerassige automatische draaibank
Wielowrzecionowy automat tokarski Okuma “Impact” LU-15M
Torno automático multifuso Okuma “Impact” LU-15M
Strung automat cu mai multe arbori Okuma “Impact” LU-15M
Okuma “Impact” LU-15M Многошпиндельный токарный станок
Automatski strug sa više vretena Okuma “Impact” LU-15M
Okuma “Impact” LU-15M Flerspindlig automatisk svarv
Otomatik çok milli torna tezgahı Okuma “Impact” LU-15M
EN
- Languages
English (GB)