Contact us to receive an offer.
| Manufacturer | NAKAMURA-TOME |
|---|---|
| Model | STW-40 |
| Year | 2000 |
| Location | Portugal
|
This Nakamura-Tome STW-40 9-axis lathe was manufactured in 2000 and has a maximum turning diameter of 570 mm and a turning length of up to 1,550 mm. It achieves spindle speeds of up to 3,500 rpm and rapid feed rates of 25 m/min on the X-axes and 30 m/min on the Z-axes. It is ideal for complex machining tasks and is equipped with a WZG tool magazine with 80-tool capacity and a chip conveyor with an articulated belt. Contact us for more information about this machine.
Working width: 3,500 mm
Depth: 6,200 mm
Height: 3,200 mm
Machine weight: 22,000 kg
Brand: FANUC
Model: 16i-TA
Spindle speed range: 30–3,500
Spindle diameter: 85 mm
Number of axes: 9
X-axis travel: 400 mm
X-axis rapid traverse: 25 m/min
Y-axis rapid traverse: 20 m/min
Z-axis travel: 1,550 mm
Z-axis rapid traverse: 30 m/min
12,000 rpm for the WZG upper spindle with a drive power of 11/7.5 kW and torque of 79/47 Nm
WZG tool magazine with 80 positions
Automatic machine start-up and shutdown with warm-up program function
WZG breakage monitoring with alarm for the WZG upper spindle
2 Brinkmann high-pressure pumps for the WZG upper spindle and the lower tower (pump capacity = 45 liters per minute)
Chip conveyor with articulated belt and right-side discharge
Maximum rotation diameter of the WZG upper spindle: 570 mm // maximum rotation diameter of the left and right lower towers: 400 mm
Standard swivel diameter: 300 mm
Maximum swivel length from the tower base to the left and right: 500 mm
Maximum swivel length of the WZG upper spindle: 1550 mm
Distance between spindle ends: 1,900 mm
Distance between the two three-jaw chucks: 1,500 mm
Power requirements: total connected load 160 kVA
Air consumption: approx. 500 liters per minute
C1 + C2: 400 rpm
Shaft B: 12.5 rpm Left/right spindle:
Drive power and torque: 22/15 kW
Torque: 500/794 Nm
Spindle speed: 30–3,500 rpm
Spindle tip: A1-8
Front bearing inner diameter: 130 mm
Spindle bore: 85 mm
Maximum bar diameter: 71 mm
Maximum sleeve size: 315 mm
C-axis
3 simultaneous axes: X, Z, C
Start-up time: 0.5 s
Rapid traverse speed: 400 rpm (144,000 °/min)
Feed rate: 1–4,800 °/min
Indexing accuracy: 0.011° (30 arcseconds)
Repeatability: ± 0.006° (± 20 arcseconds)
Spindle disc brake torque: 25 kgfm
Milling and Bphr drive for WZG top spindle: CAPTO-C6
Drive power: 15/11 kW from 800 rpm
Motor speed: from 60 to 6,000 rpm
Torque: WeldonS, 10, 12, 14, 16, 20, 25
Clamping device for attached tools: ER-25/ER-32 collet chuck
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 6 |
| Last activity | Oct. 30, 2026 |
This Nakamura-Tome STW-40 9-axis lathe was manufactured in 2000 and has a maximum turning diameter of 570 mm and a turning length of up to 1,550 mm. It achieves spindle speeds of up to 3,500 rpm and rapid feed rates of 25 m/min on the X-axes and 30 m/min on the Z-axes. It is ideal for complex machining tasks and is equipped with a WZG tool magazine with 80-tool capacity and a chip conveyor with an articulated belt. Contact us for more information about this machine.
Working width: 3,500 mm
Depth: 6,200 mm
Height: 3,200 mm
Machine weight: 22,000 kg
Brand: FANUC
Model: 16i-TA
Spindle speed range: 30–3,500
Spindle diameter: 85 mm
Number of axes: 9
X-axis travel: 400 mm
X-axis rapid traverse: 25 m/min
Y-axis rapid traverse: 20 m/min
Z-axis travel: 1,550 mm
Z-axis rapid traverse: 30 m/min
12,000 rpm for the WZG upper spindle with a drive power of 11/7.5 kW and torque of 79/47 Nm
WZG tool magazine with 80 positions
Automatic machine start-up and shutdown with warm-up program function
WZG breakage monitoring with alarm for the WZG upper spindle
2 Brinkmann high-pressure pumps for the WZG upper spindle and the lower tower (pump capacity = 45 liters per minute)
Chip conveyor with articulated belt and right-side discharge
Maximum rotation diameter of the WZG upper spindle: 570 mm // maximum rotation diameter of the left and right lower towers: 400 mm
Standard swivel diameter: 300 mm
Maximum swivel length from the tower base to the left and right: 500 mm
Maximum swivel length of the WZG upper spindle: 1550 mm
Distance between spindle ends: 1,900 mm
Distance between the two three-jaw chucks: 1,500 mm
Power requirements: total connected load 160 kVA
Air consumption: approx. 500 liters per minute
C1 + C2: 400 rpm
Shaft B: 12.5 rpm Left/right spindle:
Drive power and torque: 22/15 kW
Torque: 500/794 Nm
Spindle speed: 30–3,500 rpm
Spindle tip: A1-8
Front bearing inner diameter: 130 mm
Spindle bore: 85 mm
Maximum bar diameter: 71 mm
Maximum sleeve size: 315 mm
C-axis
3 simultaneous axes: X, Z, C
Start-up time: 0.5 s
Rapid traverse speed: 400 rpm (144,000 °/min)
Feed rate: 1–4,800 °/min
Indexing accuracy: 0.011° (30 arcseconds)
Repeatability: ± 0.006° (± 20 arcseconds)
Spindle disc brake torque: 25 kgfm
Milling and Bphr drive for WZG top spindle: CAPTO-C6
Drive power: 15/11 kW from 800 rpm
Motor speed: from 60 to 6,000 rpm
Torque: WeldonS, 10, 12, 14, 16, 20, 25
Clamping device for attached tools: ER-25/ER-32 collet chuck
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 6 |
| Last activity | Oct. 30, 2026 |
| Turning length | 1000 mm |
|---|---|
| Type of CNC | |
| Tailstock | no |
| Turning Ø | 460 mm |
|---|---|
| Spindle taper | |
| Bar feeder | no |
France
2017
| Turning Ø | 150 mm |
|---|---|
| X-axis | 100 mm |
| Spindle taper | JIS A2-5 |
| Number of tools on turret | 10 |
| Turning speed | 10000 rpm |
| Bar feeder | no |
| Type of CNC | MITSUBISHI M730UM |
|---|---|
| Z-axis | 220 mm |
| Number of turrets | 2 |
| Number of rotating tools | 20 |
| Tailstock | no |
France
2014
| Turning length | 564 mm |
|---|---|
| Ø above the bed | 923.8 mm |
| Length between centers | 512 mm |
| X-axis | 260 mm |
| Max workpiece weight | 80 kg |
| Spindle bore | 51 mm |
| Number of tools on turret | 12 |
| Turning speed | 6000 rpm |
| Turning Ø | 386 mm |
|---|---|
| Ø above transversing slide | 755 mm |
| Type of CNC | MAPPS M730BL |
| Z-axis | 590 mm |
| Spindle taper | A2-5" |
| Number of turrets | 1 |
| Number of rotating tools | 12 |
| Spindle motor power | 11 kW |
Belgium
| Ø above the bed | 720 mm |
|---|---|
| Type of CNC | Siemens Sinumerik 840C |
| Z-axis | 1500 mm |
| Spindle bore | 110 mm |
| Turning speed | 4000 rpm |
| Tailstock | no |
| Length between centers | 1500 mm |
|---|---|
| X-axis | 320 mm |
| Spindle taper | A2-11 |
| Number of tools on turret | 12 |
| Spindle motor power | 62 kW |
| Bar feeder | no |
Portugal
2000
| Turning length | 1550 mm |
|---|---|
| Length between centers | 1900 mm |
| X-axis | 400 mm |
| Spindle taper | |
| Turning speed | 3500 rpm |
| Tailstock | no |
| Turning Ø | 570 mm |
|---|---|
| Type of CNC | FANUC 16i-TA |
| Z-axis | 1550 mm |
| Spindle bore | 85 mm |
| Spindle motor power | 22 kW |
| Bar feeder | no |
Italy
2017
| Turning length | 1500 mm |
|---|---|
| Ø above transversing slide | 160 mm |
| Type of CNC | |
| Z-axis | 500 mm |
| Spindle bore | 62 mm |
| Turning speed | 3500 rpm |
| Tailstock | no |
| Ø above the bed | 420 mm |
|---|---|
| Length between centers | 1500 mm |
| X-axis | 250 mm |
| Spindle taper | |
| Number of rotating tools | 8 |
| Spindle motor power | 10.7 kW |
| Bar feeder | no |
Switzerland
2017
| Turning length | mm |
|---|---|
| Ø above the bed | mm |
| Length between centers | 1290 mm |
| X-axis | mm |
| Max workpiece weight | kg |
| Spindle bore | mm |
| Number of tools on turret | 120 |
| Turning speed | 4500 rpm |
| Turning Ø | mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | FANUC 31i-NT-SmartX |
| Z-axis | mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | 11 kW |
Turkey
2023
| Turning length | 400 mm |
|---|---|
| Type of CNC | |
| Turning speed | 6000 rpm |
| Bar feeder | no |
| Turning Ø | 195 mm |
|---|---|
| Spindle taper | A2-5 |
| Tailstock | no |
Italy
2007
| Type of CNC | |
|---|---|
| Z-axis | 580 mm |
| Number of turrets | 2 |
| Tailstock | no |
| X-axis | 165 mm |
|---|---|
| Spindle taper | 70 |
| Number of tools on turret | 4 |
| Bar feeder | no |
Croatia
2009
| Turning length | 250 mm |
|---|---|
| Length between centers | 1095 mm |
| X-axis | 192.5 mm |
| Spindle taper | |
| Turning speed | 4500 rpm |
| Tailstock | no |
| Turning Ø | 325 mm |
|---|---|
| Type of CNC | |
| Z-axis | 290 mm |
| Spindle bore | 80 mm |
| Spindle motor power | 26 kW |
| Bar feeder | no |
Finland
~ 1983
| Type of CNC | |
|---|---|
| Tailstock | no |
| Spindle taper | |
|---|---|
| Bar feeder | no |
Turkey
2015
| Type of CNC | Fanuc |
|---|---|
| Tailstock | no |
| Spindle taper | |
|---|---|
| Bar feeder | no |
Croatia
2014
| Turning length | 1100 mm |
|---|---|
| Length between centers | 1350 mm |
| X-axis | 202.5 mm |
| Spindle taper | |
| Number of tools on turret | 24 |
| Spindle motor power | 15 kW |
| Bar feeder | no |
| Turning Ø | 640 mm |
|---|---|
| Type of CNC | fanuc 0itd |
| Z-axis | 320 mm |
| Spindle bore | 65 mm |
| Turning speed | 4500 rpm |
| Tailstock | no |
Croatia
2014
| Turning length | mm |
|---|---|
| Ø above the bed | mm |
| Length between centers | mm |
| X-axis | 202.5 mm |
| Max workpiece weight | kg |
| Spindle bore | 65 mm |
| Number of tools on turret | |
| Turning speed | rpm |
| Turning Ø | mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | |
| Z-axis | 320 mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | kW |
Sweden
2023
| Type of CNC | |
|---|---|
| Tailstock | no |
| Spindle taper | |
|---|---|
| Bar feeder | no |
Italy
2006
| Turning length | 780 mm |
|---|---|
| Ø above the bed | 310 mm |
| Type of CNC | Fanuc 18itb |
| Z-axis | 780 mm |
| Spindle bore | 65 mm |
| Number of tools on turret | 12 |
| Turning speed | 4500 rpm |
| Tailstock | no |
| Turning Ø | 270 mm |
|---|---|
| Ø above transversing slide | 225 mm |
| X-axis | 195 mm |
| Spindle taper | ASA-6 |
| Number of turrets | 2 |
| Number of rotating tools | 12 |
| Spindle motor power | 15 kW |
| Bar feeder | no |
Netherlands
2007
| Type of CNC | |
|---|---|
| Tailstock | no |
| Spindle taper | |
|---|---|
| Bar feeder | no |
Italy
2007
| Turning length | 1090 mm |
|---|---|
| Ø above the bed | 245 mm |
| Length between centers | 210 mm |
| X-axis | 455 mm |
| Spindle taper | HSK A63 |
| Number of turrets | 2 |
| Number of rotating tools | 12 |
| Spindle motor power | 11 kW |
| Turning Ø | 245 mm |
|---|---|
| Ø above transversing slide | 65 mm |
| Type of CNC | Fanuc 31ia |
| Z-axis | 1090 mm |
| Spindle bore | 65 mm |
| Number of tools on turret | 12 |
| Turning speed | 6000 rpm |
| Tailstock | no |
Italy
2003
| Turning Ø | 65 mm |
|---|---|
| Spindle taper | ASA 6 |
| Tailstock | no |
| Type of CNC | |
|---|---|
| Number of turrets | 4 |
| Bar feeder | yes |
Italy
2006
| Turning length | 1500 mm |
|---|---|
| Ø above transversing slide | 265 mm |
| Type of CNC | D.Electron Z32 |
| Z-axis | 500 mm |
| Spindle bore | 62 mm |
| Turning speed | 2000 rpm |
| Tailstock | no |
| Ø above the bed | 520 mm |
|---|---|
| Length between centers | 1500 mm |
| X-axis | 250 mm |
| Spindle taper | asa 6 |
| Number of rotating tools | 8 |
| Spindle motor power | 10.7 kW |
| Bar feeder | no |
Italy
2007
| Turning length | 640 mm |
|---|---|
| Length between centers | 970 mm |
| X-axis | 167.5 mm |
| Spindle taper | |
| Number of turrets | 3 |
| Number of rotating tools | 12 |
| Spindle motor power | 15 kW |
| Bar feeder | no |
| Turning Ø | 190 mm |
|---|---|
| Type of CNC | FANUC 16i-TB |
| Z-axis | 250 mm |
| Spindle bore | 65 mm |
| Number of tools on turret | 24 |
| Turning speed | 5000 rpm |
| Tailstock | no |
Germany
2015
| Turning length | 678 mm |
|---|---|
| Type of CNC | |
| Z-axis | 1040 mm |
| Turning speed | 5000 rpm |
| Bar feeder | no |
| Turning Ø | 175 mm |
|---|---|
| X-axis | 330 mm |
| Spindle taper | |
| Tailstock | no |
Italy
2001
| Ø above the bed | 600 mm |
|---|---|
| Length between centers | 2000 mm |
| Spindle taper | Cam Lock 8" |
| Turning speed | 2000 rpm |
| Tailstock | no |
| Ø above transversing slide | 360 mm |
|---|---|
| Type of CNC | D.Electron CN-Z32 |
| Number of rotating tools | 4 |
| Spindle motor power | 18 kW |
| Bar feeder | no |
Italy
2001
| Length between centers | 550 mm |
|---|---|
| X-axis | 180 mm |
| Spindle taper | ISO A5″ |
| Bar feeder | no |
| Type of CNC | Fanuc serie 21 i-T |
|---|---|
| Z-axis | 550 mm |
| Tailstock | no |
Italy
2003
| Turning Ø | 65 mm |
|---|---|
| Spindle taper | |
| Number of rotating tools | 6 |
| Bar feeder | no |
| Type of CNC | FANUC Series 16i-TB |
|---|---|
| Spindle bore | 65 mm |
| Tailstock | no |
Italy
2006
| Turning length | 780 mm |
|---|---|
| Ø above the bed | mm |
| Length between centers | mm |
| X-axis | 195 mm |
| Max workpiece weight | kg |
| Spindle bore | mm |
| Number of tools on turret | |
| Turning speed | 4500 rpm |
| Turning Ø | 270 mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | |
| Z-axis | 780 mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | 15 kW |
Germany
2002
| Turning length | 600 mm |
|---|---|
| Ø above the bed | 340 mm |
| Type of CNC | siemens 840 d |
| Spindle bore | 55 mm |
| Number of rotating tools | 12 |
| Spindle motor power | 27 kW |
| Bar feeder | no |
| Turning Ø | 340 mm |
|---|---|
| Ø above transversing slide | 300 mm |
| Spindle taper | ASA 6 |
| Number of tools on turret | 12 |
| Turning speed | 4000 rpm |
| Tailstock | no |
Germany
2002
| Turning length | 600 mm |
|---|---|
| Ø above the bed | 340 mm |
| Type of CNC | Siemens 840 D |
| Spindle bore | 55 mm |
| Number of rotating tools | 12 |
| Spindle motor power | 27 kW |
| Bar feeder | no |
| Turning Ø | 340 mm |
|---|---|
| Ø above transversing slide | 300 mm |
| Spindle taper | ASA 6 |
| Number of tools on turret | 12 |
| Turning speed | 4000 rpm |
| Tailstock | no |
Italy
2007
| Turning length | mm |
|---|---|
| Ø above the bed | mm |
| Length between centers | mm |
| X-axis | mm |
| Max workpiece weight | kg |
| Spindle bore | mm |
| Number of tools on turret | |
| Turning speed | rpm |
| Turning Ø | mm |
|---|---|
| Ø above transversing slide | mm |
| Type of CNC | |
| Z-axis | mm |
| Spindle taper | |
| Number of turrets | |
| Number of rotating tools | |
| Spindle motor power | kW |
Italy
2011
| Type of CNC | |
|---|---|
| Tailstock | no |
| Spindle taper | |
|---|---|
| Bar feeder | no |
CNC струг NAKAMURA-TOME STW-40
CNC soustruh NAKAMURA-TOME STW-40
NAKAMURA-TOME STW-40 CNC-drejebænk
NAKAMURA-TOME STW-40 CNC-Drehmaschine
Τόρνος CNC NAKAMURA-TOME STW-40
NAKAMURA-TOME STW-40 CNC lathe
Torno CNC NAKAMURA-TOME STW-40
Tour CNC NAKAMURA-TOME STW-40
CNC tokarski stroj NAKAMURA-TOME STW-40
NAKAMURA-TOME STW-40 CNC esztergagép
Tornio CNC NAKAMURA-TOME STW-40
NAKAMURA-TOME STW-40 CNC tekinimo staklės
NAKAMURA-TOME STW-40 CNC-draaibank
Tokarka CNC NAKAMURA-TOME STW-40
Torno CNC Nakamura-Tome STW-40
Strung CNC NAKAMURA-TOME STW-40
NAKAMURA-TOME STW-40 Токарный станок с ЧПУ
CNC strug NAKAMURA-TOME STW-40
NAKAMURA-TOME STW-40 CNC-svarv
CNC torna NAKAMURA-TOME STW-40
EN
- Languages
English (GB)