Contact us to receive an offer.
| Manufacturer | Mori Seiki |
|---|---|
| Model | NZ 2000 T2Y2 |
| Year | 2008 |
| Location | Spain
|
This listing is for a Mori Seiki NZ 2000 T2Y2 CNC lathe machine, manufactured in 2008. It is a facing headstock machine designed as a turning and milling center with nine controlled axes. The machine features twin A2-6 size heads, each equipped with two overlapping turrets and two C axes, as well as two Y axes, allowing for complex machining operations.
Each turret contains 16 motorized stations, with the possibility to set up to 32 tools per turret, providing extensive tooling capacity. The machine is powered by two integrated spindle motors rated at 22 kW each, complemented by power milling motors of 7.5 kW. It offers a maximum turning diameter of 320 mm and a turning length of 810 mm, with X and Z axes travels of 210 mm each.
Additional features include two high precision collet chucks on both units, axial and radial motorized blocks, and a MQ system for tool clamping. The machine is equipped with two Renishaw automatic tool measuring arms and a Mapps 4 conversational automatic programming system, supporting automatic effort control, tool life management, and tool consumption monitoring.
The control system is a Mori Seiki MSX-701 III, with communication ports including USB, PCMCIA card, and RS-232. The machine's rapid traverse rates reach up to 50,000 mm/min on the Z axes and 30,000 mm/min on the X axes. It also includes an oil cooler on both heads, a lateral chip conveyor of hinged type, and an interface for bar loader installation.
The machine weighs approximately 8,300 kg and includes an electrical transformer, documentation, parts list, electrical diagrams, and programming and operation manuals. The exterior appears clean and well-maintained, with no visible damage. A blue coiled air hose is attached near the door handle. The control panel is located on the right side, featuring a screen, buttons, and an emergency stop button. The protective door is closed in the images, indicating safety features are in place.
This machine is suitable for precision turning and milling tasks requiring multiple axes and extensive tooling options. It is available for inspection in operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
* Mori Seiki NZ 2000 T2Y2 / September 2008.
* Facing headstock machine.
* Turning and milling center 9 controlled axes.
* Twin heads.
* Size A2-6 heads.
* 2 overlapping turrets.
* 2 C axes.
* 2 Y axes.
* Two integrated motors 22 Kw.
* Power milling motors 7,5 Kw.
* Two Renishaw automatic tool measuring arms.
* Mapps 4 conversational automatic programming system.
* Automatic effort control and tool consumption monitor.
* Tool life management and tool consumption monitor.
* Double foot pedal for chuck opening and closing.
* Oil cooler on both heads.
* 340 Nm of cutting torque.
* Both turrets with 16 stations each and all of them motorized.
* Possibility of setting with 32 tools in each turret.
* Interface for bar loader installation.
* Rear automatic parts collector, special clamp type for long parts.
* Exterior and interior tool holders.
* Axial and radial motorized blocks.
* MQ system for tool clamping.
* Max. turning diameter 320 mm.
* Turning length 810 mm.
* Mori Seiki MSX-701 III control.
* Distance main spindle - counter spindle max. 1130 mm.
* Main spindle speed 5000 rpm.
* Counter spindle speed 5.000 rpm.
* Speed of driven tools 6.000 rpm.
* Bar diameter max. 65 mm.
* Travel X1 210 mm.
* Stroke Y1 +65 / -45 mm.
* Travel distance Z1 300 mm.
* Travel X2 210 mm.
* Travel Y2 -65 / +45 mm.
* Travel Z2 810 mm.
* Travel X3 210 mm.
* Travel Y3 +65 / -45 mm.
* Traversing counter spindle 920 mm.
* Rapid traverse X1, X2, X3 30000 mm / min.
* Rapid traverse Y1, Y3 20000 mm / min.
* Rapid traverse Y2 16000 mm / min.
* Rapid traverse Z1, Z2, Z3 50000 mm / min.
* C-axis resolution 0.001 °.
* Both units equipped with two high precision collet chucks.
* Lateral chip conveyor hinged type.
* Communication ports via Usb, PCMcia card and Rs 232.
* Machine weight 8.300 Kg.
* Machine can be inspected in operation.
* Electrical transformer, documentation, parts list, electrical diagrams, programming and operation manual.
Electrical transformer, documentation, parts list, electrical diagrams, programming and operation manual.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2020 |
| Offers online | 8 |
| Last activity | Oct. 20, 2026 |
* Mori Seiki NZ 2000 T2Y2 / September 2008.
* Facing headstock machine.
* Turning and milling center 9 controlled axes.
* Twin heads.
* Size A2-6 heads.
* 2 overlapping turrets.
* 2 C axes.
* 2 Y axes.
* Two integrated motors 22 Kw.
* Power milling motors 7,5 Kw.
* Two Renishaw automatic tool measuring arms.
* Mapps 4 conversational automatic programming system.
* Automatic effort control and tool consumption monitor.
* Tool life management and tool consumption monitor.
* Double foot pedal for chuck opening and closing.
* Oil cooler on both heads.
* 340 Nm of cutting torque.
* Both turrets with 16 stations each and all of them motorized.
* Possibility of setting with 32 tools in each turret.
* Interface for bar loader installation.
* Rear automatic parts collector, special clamp type for long parts.
* Exterior and interior tool holders.
* Axial and radial motorized blocks.
* MQ system for tool clamping.
* Max. turning diameter 320 mm.
* Turning length 810 mm.
* Mori Seiki MSX-701 III control.
* Distance main spindle - counter spindle max. 1130 mm.
* Main spindle speed 5000 rpm.
* Counter spindle speed 5.000 rpm.
* Speed of driven tools 6.000 rpm.
* Bar diameter max. 65 mm.
* Travel X1 210 mm.
* Stroke Y1 +65 / -45 mm.
* Travel distance Z1 300 mm.
* Travel X2 210 mm.
* Travel Y2 -65 / +45 mm.
* Travel Z2 810 mm.
* Travel X3 210 mm.
* Travel Y3 +65 / -45 mm.
* Traversing counter spindle 920 mm.
* Rapid traverse X1, X2, X3 30000 mm / min.
* Rapid traverse Y1, Y3 20000 mm / min.
* Rapid traverse Y2 16000 mm / min.
* Rapid traverse Z1, Z2, Z3 50000 mm / min.
* C-axis resolution 0.001 °.
* Both units equipped with two high precision collet chucks.
* Lateral chip conveyor hinged type.
* Communication ports via Usb, PCMcia card and Rs 232.
* Machine weight 8.300 Kg.
* Machine can be inspected in operation.
* Electrical transformer, documentation, parts list, electrical diagrams, programming and operation manual.
Electrical transformer, documentation, parts list, electrical diagrams, programming and operation manual.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Mori Seiki NZ 2000 T2Y2 CNC lathe machine, manufactured in 2008. It is a facing headstock machine designed as a turning and milling center with nine controlled axes. The machine features twin A2-6 size heads, each equipped with two overlapping turrets and two C axes, as well as two Y axes, allowing for complex machining operations.
Each turret contains 16 motorized stations, with the possibility to set up to 32 tools per turret, providing extensive tooling capacity. The machine is powered by two integrated spindle motors rated at 22 kW each, complemented by power milling motors of 7.5 kW. It offers a maximum turning diameter of 320 mm and a turning length of 810 mm, with X and Z axes travels of 210 mm each.
Additional features include two high precision collet chucks on both units, axial and radial motorized blocks, and a MQ system for tool clamping. The machine is equipped with two Renishaw automatic tool measuring arms and a Mapps 4 conversational automatic programming system, supporting automatic effort control, tool life management, and tool consumption monitoring.
The control system is a Mori Seiki MSX-701 III, with communication ports including USB, PCMCIA card, and RS-232. The machine's rapid traverse rates reach up to 50,000 mm/min on the Z axes and 30,000 mm/min on the X axes. It also includes an oil cooler on both heads, a lateral chip conveyor of hinged type, and an interface for bar loader installation.
The machine weighs approximately 8,300 kg and includes an electrical transformer, documentation, parts list, electrical diagrams, and programming and operation manuals. The exterior appears clean and well-maintained, with no visible damage. A blue coiled air hose is attached near the door handle. The control panel is located on the right side, featuring a screen, buttons, and an emergency stop button. The protective door is closed in the images, indicating safety features are in place.
This machine is suitable for precision turning and milling tasks requiring multiple axes and extensive tooling options. It is available for inspection in operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2020 |
| Offers online | 8 |
| Last activity | Oct. 20, 2026 |
cnc струг Mori Seiki NZ 2000 T2Y2
Soustruh cnc Mori Seiki NZ 2000 T2Y2
Mori Seiki NZ 2000 T2Y2 cnc drejebænk
Mori Seiki NZ 2000 T2Y2 Drehmaschine CNC
cnc τόρνος Mori Seiki NZ 2000 T2Y2
Mori Seiki NZ 2000 T2Y2 cnc lathe
Torno cnc Mori Seiki NZ 2000 T2Y2
Tour cnc Mori Seiki NZ 2000 T2Y2
cnc tokarski stroj Mori Seiki NZ 2000 T2Y2
Mori Seiki NZ 2000 T2Y2 cnc eszterga
Tornio cnc Mori Seiki NZ 2000 T2Y2
cnc tekinimo staklės Mori Seiki NZ 2000 T2Y2
Mori Seiki NZ 2000 T2Y2 cnc-draaibank
Tokarka CNC Mori Seiki NZ 2000 T2Y2
Torno CNC Mori Seiki NZ 2000 T2Y2
strung cnc Mori Seiki NZ 2000 T2Y2
Mori Seiki NZ 2000 T2Y2 Токарный станок с ЧПУ
cnc strug Mori Seiki NZ 2000 T2Y2
Mori Seiki NZ 2000 T2Y2 cnc svarv
Cnc torna Mori Seiki NZ 2000 T2Y2
EN
- Languages
English (GB)