Contact us to receive an offer.
| Manufacturer | Doosan |
|---|---|
| Model | S 310 SML |
| Year | 2001 |
| Location | Czech Republic
|
Product overview:
This listing is for a CNC lathe (category: Lathes - CNC lathes) described as being in good technical condition. Specifications provided in the existing listing are reproduced below for clarity. Buyers should confirm all details and request additional documentation, photos, or inspection before purchase.
Key specifications (as listed):
- Year of manufacture: 2001
- Maximum turning diameter: 310 mm
- Maximum turning length: 750 mm
- Supplied with a FEDEK feeder
- Machine weight: approximately 4,800 kg
- Overall dimensions (listed): length 3,400 mm, width 1,800 mm, height 1,900 mm
Notes and important clarifications:
- The FEDEK feeder is identified in the provided description as an included accessory. No other accessories or tooling are listed.
- The listing states the machine is in good technical condition. Specific operational status details (control model, spindle speeds, motor ratings, cycle hours, recent maintenance, or test reports) are not provided here and should be requested if relevant to your purchase decision.
- No additional numeric specifications beyond those listed above are included in this description. Any further technical data, electrical requirements, software/control version, or performance verification should be confirmed with the seller prior to commitment.
Recommendation:
Prospective buyers are advised to request current photographs, documentation (manuals, maintenance records), and to arrange an inspection or demonstration to verify suitability for their applications and to confirm the machine’s operational condition and completeness.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
In good technical condition and fully functional.
Year of manufacture 2001
Maximum turning diameter: 310 mm
Maximum turning length: 750 mm
Lathe with FEDEK feeder.
Machine weight approx. 4,800 kg.
Dimensions: length: 3400 mm, width: 1800 mm, height: 1900 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many hours has this equipment been under power?
This equipment has 48174 hours under power.
How many hours of working time does this equipment have?
This equipment has 16970 hours of working time.
How many hours of machining time does this equipment have?
This equipment has 7536 hours of machining time.
How many hours does the machine have under power?
This equipment has 48174 hours under power.
How many hours of working time does the machine have?
This equipment has 16970 hours of working time.
How many hours of machining time does the machine have?
This equipment has 7536 hours of machining time.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 16 |
| Last activity | Nov. 5, 2026 |
In good technical condition and fully functional.
Year of manufacture 2001
Maximum turning diameter: 310 mm
Maximum turning length: 750 mm
Lathe with FEDEK feeder.
Machine weight approx. 4,800 kg.
Dimensions: length: 3400 mm, width: 1800 mm, height: 1900 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many hours has this equipment been under power?
This equipment has 48174 hours under power.
How many hours of working time does this equipment have?
This equipment has 16970 hours of working time.
How many hours of machining time does this equipment have?
This equipment has 7536 hours of machining time.
How many hours does the machine have under power?
This equipment has 48174 hours under power.
How many hours of working time does the machine have?
This equipment has 16970 hours of working time.
How many hours of machining time does the machine have?
This equipment has 7536 hours of machining time.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Product overview:
This listing is for a CNC lathe (category: Lathes - CNC lathes) described as being in good technical condition. Specifications provided in the existing listing are reproduced below for clarity. Buyers should confirm all details and request additional documentation, photos, or inspection before purchase.
Key specifications (as listed):
- Year of manufacture: 2001
- Maximum turning diameter: 310 mm
- Maximum turning length: 750 mm
- Supplied with a FEDEK feeder
- Machine weight: approximately 4,800 kg
- Overall dimensions (listed): length 3,400 mm, width 1,800 mm, height 1,900 mm
Notes and important clarifications:
- The FEDEK feeder is identified in the provided description as an included accessory. No other accessories or tooling are listed.
- The listing states the machine is in good technical condition. Specific operational status details (control model, spindle speeds, motor ratings, cycle hours, recent maintenance, or test reports) are not provided here and should be requested if relevant to your purchase decision.
- No additional numeric specifications beyond those listed above are included in this description. Any further technical data, electrical requirements, software/control version, or performance verification should be confirmed with the seller prior to commitment.
Recommendation:
Prospective buyers are advised to request current photographs, documentation (manuals, maintenance records), and to arrange an inspection or demonstration to verify suitability for their applications and to confirm the machine’s operational condition and completeness.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 16 |
| Last activity | Nov. 5, 2026 |
CNC струг Doosan S 310 SML
CNC soustruh Doosan S 310 SML
Doosan S 310 SML CNC-drejebænk
Doosan S 310 SML CNC-Drehmaschine
Τόρνος CNC Doosan S 310 SML
Doosan S 310 SML CNC lathe
Torno CNC Doosan S 310 SML
Tour CNC Doosan S 310 SML
CNC tokarski stroj Doosan S 310 SML
Doosan S 310 SML CNC esztergagép
Tornio CNC Doosan S 310 SML
Doosan S 310 SML CNC tekinimo staklės
Doosan S 310 SML CNC-draaibank
Tokarka CNC Doosan S 310 SML
Torno CNC Doosan S 310 SML
Strung CNC Doosan S 310 SML
Doosan S 310 SML Токарный станок с ЧПУ
CNC strug Doosan S 310 SML
Doosan S 310 SML CNC-svarv
CNC torna Doosan S 310 SML
EN
- Languages
English (GB)