| Manufacturer | DOOSAN |
|---|---|
| Model | Mynx 7500 |
| Year | 2011 |
| Location | Germany
|
DOOSAN Mynx 7500 vertical machining centre, manufactured in 2011. This 3-axis machine has travels of 1,525 mm on the X axis, 762 mm on the Y axis and 625 mm on the Z axis. The listed maximum spindle speed is 12,000 rpm, and the machine has an SK 40 taper and a 30-station tool changer. The control is listed as DOOSAN-FANUC i Series.
Listed equipment includes through-spindle coolant (20 bar), external coolant and a Renishaw measuring probe. A coolant tank and pump or filtration assembly are present. A chip collection bin is also visible. The machining area includes a table with vises and workholding fixtures; metal workpieces are held in the vises. The enclosure has a front operator panel with display, keypad and buttons. Service cabinets, hoses, pneumatic components and a cable carrier are present around the machine.
The enclosure is partly open in the available views. Metal chips are present on the table and inside the work area, and the lower front panels show scuffs and scratches. Dirt and a dark mark are visible on a side access panel. An open lower service section exposes fittings, tubing and other components. These visible condition details describe the machine’s appearance and do not confirm its operating condition.
The listed operating figures are 40,592 hours of cutting time, 2,760 hours of cycle time and a part count of 277. Listed electrical information is AC 200/220 V, 3 phase, PE, 50/60 Hz, rated power 38.35 kVA, full load current 137.34 A, interrupting capacity 5 kA and short circuit capacity 10 kA. Machine weight is listed as 13,500 kg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis DOOSAN Mynx 7500 was manufactured in 2011. It features an impressive X-axis travel of 1,525 mm, Y-axis travel of 762 mm, and Z-axis travel of 625 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the DOOSAN Mynx 7500 vertical machining centre we have for sale. Contact us for further details.- Control Unit: DOOSAN-FANUC i Series
- Tool Changer Capacity: 30 stations
- Through-Spindle Coolant (TSC): 20 bar
- External Coolant: Yes
- Measuring Probe: Renishaw probe
- Operating Hours - Cutting Time: 40,592 h
- Operating Hours - Cycle Time: 2,760 h
- Operating Hours - Part Count: 277
- Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz
- Rated Power: 38.35 kVA
- Full Load Current: 137.34 A
- Interrupting Capacity: 5 kA
- Short Circuit Capacity: 10 kA
- Total Machine Weight: 13,500 kg
Machine Weight: 13500 kg
Number of Axes: 3
Spindle Speed: 12000 RPM
Taper Size: SK 40
X-axis Travel: 1525 mm
Y-axis Travel: 762 mm
Z-axis Travel: 625 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis DOOSAN Mynx 7500 was manufactured in 2011. It features an impressive X-axis travel of 1,525 mm, Y-axis travel of 762 mm, and Z-axis travel of 625 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the DOOSAN Mynx 7500 vertical machining centre we have for sale. Contact us for further details.- Control Unit: DOOSAN-FANUC i Series
- Tool Changer Capacity: 30 stations
- Through-Spindle Coolant (TSC): 20 bar
- External Coolant: Yes
- Measuring Probe: Renishaw probe
- Operating Hours - Cutting Time: 40,592 h
- Operating Hours - Cycle Time: 2,760 h
- Operating Hours - Part Count: 277
- Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz
- Rated Power: 38.35 kVA
- Full Load Current: 137.34 A
- Interrupting Capacity: 5 kA
- Short Circuit Capacity: 10 kA
- Total Machine Weight: 13,500 kg
Machine Weight: 13500 kg
Number of Axes: 3
Spindle Speed: 12000 RPM
Taper Size: SK 40
X-axis Travel: 1525 mm
Y-axis Travel: 762 mm
Z-axis Travel: 625 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
DOOSAN Mynx 7500 vertical machining centre, manufactured in 2011. This 3-axis machine has travels of 1,525 mm on the X axis, 762 mm on the Y axis and 625 mm on the Z axis. The listed maximum spindle speed is 12,000 rpm, and the machine has an SK 40 taper and a 30-station tool changer. The control is listed as DOOSAN-FANUC i Series.
Listed equipment includes through-spindle coolant (20 bar), external coolant and a Renishaw measuring probe. A coolant tank and pump or filtration assembly are present. A chip collection bin is also visible. The machining area includes a table with vises and workholding fixtures; metal workpieces are held in the vises. The enclosure has a front operator panel with display, keypad and buttons. Service cabinets, hoses, pneumatic components and a cable carrier are present around the machine.
The enclosure is partly open in the available views. Metal chips are present on the table and inside the work area, and the lower front panels show scuffs and scratches. Dirt and a dark mark are visible on a side access panel. An open lower service section exposes fittings, tubing and other components. These visible condition details describe the machine’s appearance and do not confirm its operating condition.
The listed operating figures are 40,592 hours of cutting time, 2,760 hours of cycle time and a part count of 277. Listed electrical information is AC 200/220 V, 3 phase, PE, 50/60 Hz, rated power 38.35 kVA, full load current 137.34 A, interrupting capacity 5 kA and short circuit capacity 10 kA. Machine weight is listed as 13,500 kg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
| Axis X | 500 mm |
|---|---|
| Axis Z | 399 mm |
| Type of CNC | HEIDENHAIN TNC 620 |
| Table width | 480 mm |
| Number of tool pockets | 20 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 400 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 908 mm |
| Max. part weight | 250 kg |
| Spindle taper | ISO 30 |
| Axis X | 1500 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1740 mm |
| Spindle taper |
| Axis Z | 460 mm |
|---|---|
| Type of CNC | |
| Table width | 650 mm |
| Max. spindle speed | 3150 rpm |
France
2012
| Axis X | 500 mm |
|---|---|
| Axis Z | 330 mm |
| Type of CNC | FANUC Series 31i Model B5 |
| Table width | 400 mm |
| Number of tool pockets | 21 |
| Max. spindle speed | 10000 rpm |
| Axis Y | 400 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 650 mm |
| Max. part weight | 2 kg |
| Spindle taper | |
| Spindle motor power | 7.5 kW |
| Axis X | 835 mm |
|---|---|
| Axis Z | 510 mm |
| Type of CNC | Heidenhain TNC 530 |
| Table width | 560 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 10000 rpm |
| Axis Y | 510 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1000 mm |
| Max. part weight | 800 kg |
| Spindle taper | sk40 |
Germany
2010
| Axis X | 1270 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | Fanuc Series |
| Table width | 670 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 670 mm |
|---|---|
| Rotary table (4th axis) | yes |
| Table length | 1300 mm |
| Max. part weight | 1000 kg |
| Spindle taper | BT40 |
| Spindle motor power | 15 kW |
Slovenia
2021
| Axis X | 1050 mm |
|---|---|
| Axis Z | 510 mm |
| Type of CNC | fanuc i series |
| Table width | 570 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 570 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1300 mm |
| Max. part weight | 1000 kg |
| Spindle taper | bt 40 |
| Spindle motor power | 18.5 kW |
Italy
2011
| Axis X | 1020 mm |
|---|---|
| Axis Z | 510 mm |
| Type of CNC | |
| Table width | 540 mm |
| Number of tool pockets | |
| Max. spindle speed | 12000 rpm |
| Axis Y | 540 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1200 mm |
| Max. part weight | kg |
| Spindle taper | |
| Spindle motor power | kW |
Italy
2017
| Axis X | 1050 mm |
|---|---|
| Axis Z | 510 mm |
| Type of CNC | |
| Table width | 570 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 15000 rpm |
| Axis Y | 570 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1300 mm |
| Max. part weight | 1000 kg |
| Spindle taper | |
| Spindle motor power | 18.5 kW |
Slovenia
2010
| Axis X | 1270 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | Fanuc |
| Table width | 670 mm |
| Spindle taper | BT40 |
| Axis Y | 670 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1300 mm |
| Max. part weight | 500 kg |
| Max. spindle speed | 12000 rpm |
Czech Republic
2011
| Axis X | 762 mm |
|---|---|
| Axis Z | 510 mm |
| Type of CNC | |
| Table width | 435 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 435 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 920 mm |
| Max. part weight | 600 kg |
| Spindle taper | |
| Spindle motor power | 15 kW |
United Kingdom
2015
| Axis X | 1020 mm |
|---|---|
| Axis Z | 520 mm |
| Type of CNC | |
| Table width | 540 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 510 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1200 mm |
| Max. part weight | 800 kg |
| Spindle taper | BT40 |
| Spindle motor power | 15 kW |
United Kingdom
2008
| Axis X | 1525 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | Fanuc 21iMB |
| Table width | 750 mm |
| Number of tool pockets | 40 |
| Max. spindle speed | 6000 rpm |
| Axis Y | 762 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1600 mm |
| Max. part weight | 1500 kg |
| Spindle taper | BT 50 |
| Spindle motor power | 18.5 kW |
| Axis X | 560 mm |
|---|---|
| Axis Z | 570 mm |
| Type of CNC | Fanuc |
| Table width | 490 mm |
| Spindle taper | ISO 40 |
| Axis Y | 430 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 712 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
United Kingdom
2017
| Axis X | 1300 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | Fanuc 0i with iGuide |
| Table width | 670 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 670 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1500 mm |
| Max. part weight | 1300 kg |
| Spindle taper | ISO40 |
| Spindle motor power | 18.5 kW |
United Kingdom
2018
| Axis X | 1525 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | Fanuc 0i |
| Table width | 750 mm |
| Number of tool pockets | 40 |
| Max. spindle speed | 6000 rpm |
| Axis Y | 762 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1600 mm |
| Max. part weight | 1500 kg |
| Spindle taper | BT50 |
| Spindle motor power | 18.6 kW |
United Kingdom
2024
| Axis X | 30 mm |
|---|---|
| Axis Z | 24 mm |
| Type of CNC | Fanuc i series |
| Table width | 760 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 762 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1630 mm |
| Max. part weight | 1500 kg |
| Spindle taper | BT40 |
| Spindle motor power | 18.5 kW |
United Kingdom
2008
| Axis X | 1020 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | Fanuc 21iMB |
| Table width | 500 mm |
| Number of tool pockets | 24 |
| Max. spindle speed | 8000 rpm |
| Axis Y | 510 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1200 mm |
| Max. part weight | 800 kg |
| Spindle taper | BT40 |
| Spindle motor power | 15 kW |
| Axis X | 1050 mm |
|---|---|
| Axis Z | 710 mm |
| Type of CNC | Fanuc |
| Table width | 570 mm |
| Spindle taper | BT40 |
| Spindle motor power | 18.5 kW |
| Axis Y | 570 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1300 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
| Axis X | 1020 mm |
|---|---|
| Axis Z | 530 mm |
| Type of CNC | Fanuc |
| Table width | 540 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 540 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1200 mm |
| Max. part weight | 800 kg |
| Spindle taper | BT40 |
| Spindle motor power | 15 kW |
United Kingdom
2020
| Axis X | 1525 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1600 mm |
| Max. part weight | 1500 kg |
| Spindle taper | |
| Spindle motor power | kW |
| Axis Z | 625 mm |
|---|---|
| Type of CNC | |
| Table width | 750 mm |
| Number of tool pockets | |
| Max. spindle speed | 12000 rpm |
Italy
2007
| Axis X | 1500 mm |
|---|---|
| Axis Z | 750 mm |
| Type of CNC | Fanuc 21i |
| Table width | 750 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 6000 rpm |
| Axis Y | 750 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1600 mm |
| Max. part weight | 1500 kg |
| Spindle taper | ISO50 |
| Spindle motor power | 22 kW |
France
2019
| Axis X | 1020 mm |
|---|---|
| Axis Z | 530 mm |
| Type of CNC | Fanuc i series |
| Table width | 500 mm |
| Number of tool pockets | 24 |
| Max. spindle speed | 6000 rpm |
| Axis Y | 550 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1200 mm |
| Max. part weight | 800 kg |
| Spindle taper | ISO 50 |
United Kingdom
2013
| Rotary table (4th axis) | no |
|---|---|
| Spindle taper |
| Type of CNC |
|---|
Netherlands
2018
| Axis X | 1300 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | siemens sinumerik 828d |
| Spindle taper | bt40 |
| Axis Y | 670 mm |
|---|---|
| Rotary table (4th axis) | no |
| Number of tool pockets | 30 |
| Max. spindle speed | 12000 rpm |
Italy
2010
| Axis X | 1300 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | heidenhain itnc530 |
| Table width | 650 mm |
| Number of tool pockets | 30 |
| Spindle motor power | 22 kW |
| Axis Y | 650 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1400 mm |
| Max. part weight | 8 kg |
| Spindle taper | iso40 |
| Axis X | 1300 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | fanuc series 21imb |
| Table width | 650 mm |
| Number of tool pockets | 30 |
| Max. spindle speed | 8000 rpm |
| Axis Y | 650 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1400 mm |
| Max. part weight | 1000 kg |
| Spindle taper | iso40 |
South Korea
2013
| Rotary table (4th axis) | no |
|---|---|
| Spindle taper |
| Type of CNC |
|---|
Italy
2008
| Axis X | 1020 mm |
|---|---|
| Axis Z | 625 mm |
| Type of CNC | Fanuc 21iMB |
| Spindle taper | ISO 40 |
| Axis Y | 510 mm |
|---|---|
| Rotary table (4th axis) | no |
| Number of tool pockets | 30 |
| Max. spindle speed | 8000 rpm |
Italy
2012
| Axis X | 1020 mm |
|---|---|
| Axis Z | 510 mm |
| Type of CNC | |
| Table width | 540 mm |
| Number of tool pockets | |
| Max. spindle speed | 12000 rpm |
| Axis Y | 540 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1200 mm |
| Max. part weight | kg |
| Spindle taper | |
| Spindle motor power | kW |
Czech Republic
| Axis X | 400 mm |
|---|---|
| Rotary table (4th axis) | no |
| Spindle taper |
| Axis Z | 1100 mm |
|---|---|
| Type of CNC | Fanuc |
| Max. spindle speed | 2000 rpm |
Вертикален обработващ център DOOSAN Mynx 7500
Vertikální obráběcí centrum DOOSAN Mynx 7500
DOOSAN Mynx 7500 Lodret bearbejdningscenter
DOOSAN Mynx 7500 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας DOOSAN Mynx 7500
DOOSAN Mynx 7500 Vertical machining center
Centro de mecanizado vertical DOOSAN Mynx 7500
Centre d'usinage vertical DOOSAN Mynx 7500
Vertikalni obradni centar DOOSAN Mynx 7500
DOOSAN Mynx 7500 Függőleges megmunkáló központ
Centro di lavoro verticale DOOSAN Mynx 7500
DOOSAN Mynx 7500 Vertikalus apdirbimo centras
DOOSAN Mynx 7500 Verticaal bewerkingscentrum
Pionowe centrum obróbcze DOOSAN Mynx 7500
Centro de usinagem vertical DOOSAN Mynx 7500
Centru de prelucrare vertical DOOSAN Mynx 7500
DOOSAN Mynx 7500 Вертикальный обрабатывающий центр
Vertikalni obradni centar DOOSAN Mynx 7500
DOOSAN Mynx 7500 Vertikalt bearbetningscenter
Dikey işleme merkezi DOOSAN Mynx 7500
Denmark
Spain
EN
- Languages
English (GB)