| Manufacturer | DOOSAN |
|---|---|
| Model | DNM650 |
| Year | 2010 |
| Location | Germany
|
DOOSAN DNM650 vertical machining centre, manufactured in 2010. The machine is listed as a four-axis model and has a Fanuc Series control system. Its stated X-axis travel is 1270 mm, maximum spindle speed is 12,000 rpm, and machine weight is 8,500 kg.
A fourth-axis rotary fixture is mounted across the machine table. The fixture has a handwheel and a tailstock-like support. The enclosed working area contains the machine table and spindle area; a CNC control panel with a screen, keypad and operator buttons is positioned on the right. Metal chips and debris are present on the table and around the fixture. This describes the visible interior condition and does not indicate whether the machine has been tested or is operational.
The listed electrical supply is AC 220 V, three-phase, PE, 50/60 Hz. The stated rated power is 42.55 kVA, full-load current is 124.30 A, interrupting capacity is 5 kA and short-circuit capacity is 35 kA. The circuit diagram version is DM50H00ZA03.
Additional listed equipment includes a signal stack light and mist extraction ducting system. This configuration brings together the Fanuc control, four-axis setup and rotary fixture in an enclosed vertical machining centre. The stated specifications and included equipment are presented as listing details; no claim is made here about operating condition or performance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 4-axis DOOSAN DNM650 was manufactured in 2010. It features a robust weight of 8500 kg and is equipped with a Fanuc Series control system. The machine includes a 4th axis rotary table unit mounted on the main table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM650 vertical machining centre we have for sale. Contact us for further details.- Mains Connection: AC 220 V, 3-Phase, PE, 50/60 Hz
- Rated Power: 42.55 kVA
- Interrupting Capacity: 5 kA
- Full Load Current: 124.30 A
- Short Circuit Capacity: 35 kA
- Circuit Diagram Version: DM50H00ZA03
- Weight: 8500 kg
- Control System: Fanuc Series
- Additional Equipment: signal stack light, mist extraction ducting system
Control Brand: FANUC
Machine Weight: 8500 kg
Number of Axes: 4
Spindle Speed: 12000 RPM
X-axis Travel: 1270 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2109 |
| Last activity | Oct. 22, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 4-axis DOOSAN DNM650 was manufactured in 2010. It features a robust weight of 8500 kg and is equipped with a Fanuc Series control system. The machine includes a 4th axis rotary table unit mounted on the main table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM650 vertical machining centre we have for sale. Contact us for further details.- Mains Connection: AC 220 V, 3-Phase, PE, 50/60 Hz
- Rated Power: 42.55 kVA
- Interrupting Capacity: 5 kA
- Full Load Current: 124.30 A
- Short Circuit Capacity: 35 kA
- Circuit Diagram Version: DM50H00ZA03
- Weight: 8500 kg
- Control System: Fanuc Series
- Additional Equipment: signal stack light, mist extraction ducting system
Control Brand: FANUC
Machine Weight: 8500 kg
Number of Axes: 4
Spindle Speed: 12000 RPM
X-axis Travel: 1270 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
DOOSAN DNM650 vertical machining centre, manufactured in 2010. The machine is listed as a four-axis model and has a Fanuc Series control system. Its stated X-axis travel is 1270 mm, maximum spindle speed is 12,000 rpm, and machine weight is 8,500 kg.
A fourth-axis rotary fixture is mounted across the machine table. The fixture has a handwheel and a tailstock-like support. The enclosed working area contains the machine table and spindle area; a CNC control panel with a screen, keypad and operator buttons is positioned on the right. Metal chips and debris are present on the table and around the fixture. This describes the visible interior condition and does not indicate whether the machine has been tested or is operational.
The listed electrical supply is AC 220 V, three-phase, PE, 50/60 Hz. The stated rated power is 42.55 kVA, full-load current is 124.30 A, interrupting capacity is 5 kA and short-circuit capacity is 35 kA. The circuit diagram version is DM50H00ZA03.
Additional listed equipment includes a signal stack light and mist extraction ducting system. This configuration brings together the Fanuc control, four-axis setup and rotary fixture in an enclosed vertical machining centre. The stated specifications and included equipment are presented as listing details; no claim is made here about operating condition or performance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2109 |
| Last activity | Oct. 22, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център DOOSAN DNM650
Vertikální obráběcí centrum DOOSAN DNM650
DOOSAN DNM650 Lodret bearbejdningscenter
DOOSAN DNM650 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας DOOSAN DNM650
DOOSAN DNM650 Vertical machining center
Centro de mecanizado vertical DOOSAN DNM650
Centre d'usinage vertical DOOSAN DNM650
Vertikalni obradni centar DOOSAN DNM650
DOOSAN DNM650 Függőleges megmunkáló központ
Centro di lavoro verticale DOOSAN DNM650
DOOSAN DNM650 Vertikalus apdirbimo centras
DOOSAN DNM650 Verticaal bewerkingscentrum
Pionowe centrum obróbcze DOOSAN DNM650
Centro de usinagem vertical DOOSAN DNM650
Centru de prelucrare vertical DOOSAN DNM650
DOOSAN DNM650 Вертикальный обрабатывающий центр
Vertikalni obradni centar DOOSAN DNM650
DOOSAN DNM650 Vertikalt bearbetningscenter
Dikey işleme merkezi DOOSAN DNM650
EN
- Languages
English (GB)