| Manufacturer | BOBST |
|---|---|
| Model | SP 1420 |
| Year | 1985 |
| Location | Italy
|
This listing is for a BOBST SP 1420 die-cutting and hot foil stamping machine, manufactured in 1985. It has been modified specifically for hot foil stamping and die-cutting, with the modification carried out in 2020. The machine supports a maximum paper size of 102.0 cm in length and 142.0 cm in width, and a minimum paper size of 50.0 cm by 70.0 cm, accommodating a wide range of production requirements.
The machine features a new electrical and hot stamping system installed during the 2020 rebuild. The electrical cabinet is equipped with organized wiring, an Invertek Optidrive frequency inverter, two HOT NTT460 motor controllers or drives, and Siemens PLC modules, indicating a modern control system integration. The control interface includes a Siemens SIMATIC HMI touchscreen panel with multiple buttons, as well as emergency stop and start/stop buttons for operational safety and convenience.
Structural safety components include metal safety mesh gates on both sides of the loading area. The machine also has a control panel on the right side with an emergency stop button and other controls. An electric motor is mounted on the top left side, and mechanical arms and rollers are visible on the machine's side, supporting its die-cutting and stamping functions. A hand crank is located at the bottom center of the machine.
The machine has been maintained annually since its rebuild and has produced approximately 4,000,000 copies. It offers a pressure capacity of 600 tons and a maximum speed of 3500 sheets per hour. The machine shows signs of use with some dirt and wear marks on its surface, and the HMI screen has visible smudges or fingerprints, consistent with regular operation. Overall, it is presented in a clean and well-maintained state, suitable for industrial die-cutting and hot foil stamping applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Bobst Sp 1420 1985 Modified for hot stamping and die-cutting, modification year 2020.
New electrical and hot stamping system.
It was rebuilt from scratch four years ago, then maintenance was carried out once a year.
Completely new electrical systems, engines etc
Visible in production Perfectly functional Min size 50x70 Max size 102x142
4,000,000 copies
2 Foil Rewinds
Pressure 600 T
Max speed 3500 Sh/h
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What modifications have been made to this BOBST SP 1420?
This BOBST SP 1420 is a modified machine for hot stamping and die cutting, manufactured in 1985.
When was this equipment last refurbished?
This equipment has been completely refurbished four years ago, with constant annual maintenance performed.
What new features does this BOBST SP 1420 have?
This BOBST SP 1420 features new electrical systems and motors.
Is the machine currently operational?
The machine is currently operational and can be seen in production.
Can this BOBST SP 1420 be inspected?
This BOBST SP 1420 is available for inspection.
Is this BOBST SP 1420 ready for delivery?
This BOBST SP 1420 is ready for immediate delivery.
Does this machine come with a warranty option?
This machine can be provided with a general overhaul and a 12-month warranty if requested.
When was this BOBST SP 1420 modified for hot stamping?
This BOBST SP 1420 has been modified for hot stamping five years ago, with a new electrical system and PLC.
Who has maintained this equipment?
This equipment has been maintained by Sergio Bocchio (S.B.M.) in Milan.
Is this BOBST SP 1420 in good working condition?
This BOBST SP 1420 is available for sale and is currently in good working condition.
Why is this machine being sold?
This machine is being sold due to the owner's decision to upgrade.
What modifications have been made to this BOBST SP 1420?
This BOBST SP 1420 is modified for hot stamping and die-cutting.
When was this equipment manufactured?
This equipment was manufactured in 1985.
What modifications were made to this Bobst SP 1420?
This Bobst SP 1420 1985 machine has been modified for hot stamping and die-cutting.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Sept. 22, 2026 |
Bobst Sp 1420 1985 Modified for hot stamping and die-cutting, modification year 2020.
New electrical and hot stamping system.
It was rebuilt from scratch four years ago, then maintenance was carried out once a year.
Completely new electrical systems, engines etc
Visible in production Perfectly functional Min size 50x70 Max size 102x142
4,000,000 copies
2 Foil Rewinds
Pressure 600 T
Max speed 3500 Sh/h
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What modifications have been made to this BOBST SP 1420?
This BOBST SP 1420 is a modified machine for hot stamping and die cutting, manufactured in 1985.
When was this equipment last refurbished?
This equipment has been completely refurbished four years ago, with constant annual maintenance performed.
What new features does this BOBST SP 1420 have?
This BOBST SP 1420 features new electrical systems and motors.
Is the machine currently operational?
The machine is currently operational and can be seen in production.
Can this BOBST SP 1420 be inspected?
This BOBST SP 1420 is available for inspection.
Is this BOBST SP 1420 ready for delivery?
This BOBST SP 1420 is ready for immediate delivery.
Does this machine come with a warranty option?
This machine can be provided with a general overhaul and a 12-month warranty if requested.
When was this BOBST SP 1420 modified for hot stamping?
This BOBST SP 1420 has been modified for hot stamping five years ago, with a new electrical system and PLC.
Who has maintained this equipment?
This equipment has been maintained by Sergio Bocchio (S.B.M.) in Milan.
Is this BOBST SP 1420 in good working condition?
This BOBST SP 1420 is available for sale and is currently in good working condition.
Why is this machine being sold?
This machine is being sold due to the owner's decision to upgrade.
What modifications have been made to this BOBST SP 1420?
This BOBST SP 1420 is modified for hot stamping and die-cutting.
When was this equipment manufactured?
This equipment was manufactured in 1985.
What modifications were made to this Bobst SP 1420?
This Bobst SP 1420 1985 machine has been modified for hot stamping and die-cutting.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing is for a BOBST SP 1420 die-cutting and hot foil stamping machine, manufactured in 1985. It has been modified specifically for hot foil stamping and die-cutting, with the modification carried out in 2020. The machine supports a maximum paper size of 102.0 cm in length and 142.0 cm in width, and a minimum paper size of 50.0 cm by 70.0 cm, accommodating a wide range of production requirements.
The machine features a new electrical and hot stamping system installed during the 2020 rebuild. The electrical cabinet is equipped with organized wiring, an Invertek Optidrive frequency inverter, two HOT NTT460 motor controllers or drives, and Siemens PLC modules, indicating a modern control system integration. The control interface includes a Siemens SIMATIC HMI touchscreen panel with multiple buttons, as well as emergency stop and start/stop buttons for operational safety and convenience.
Structural safety components include metal safety mesh gates on both sides of the loading area. The machine also has a control panel on the right side with an emergency stop button and other controls. An electric motor is mounted on the top left side, and mechanical arms and rollers are visible on the machine's side, supporting its die-cutting and stamping functions. A hand crank is located at the bottom center of the machine.
The machine has been maintained annually since its rebuild and has produced approximately 4,000,000 copies. It offers a pressure capacity of 600 tons and a maximum speed of 3500 sheets per hour. The machine shows signs of use with some dirt and wear marks on its surface, and the HMI screen has visible smudges or fingerprints, consistent with regular operation. Overall, it is presented in a clean and well-maintained state, suitable for industrial die-cutting and hot foil stamping applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Sept. 22, 2026 |
Netherlands
1989
| Max. paper length | 90 cm |
|---|---|
| Min. paper length | 45 cm |
| Possible actions | Hot Foil Stamping |
| Max. paper width | 64 cm |
|---|---|
| Min. paper width | 29 cm |
Italy
2007
| Max. paper length | 74 cm |
|---|---|
| Min. paper length | 35 cm |
| Possible actions | Die-Cut + Emboss |
| Max. paper width | 106 cm |
|---|---|
| Min. paper width | 40 cm |
| Max sheets/hour | 7700 |
| Max. paper length | 157.5 cm |
|---|---|
| Min. paper length | 40 cm |
| Max sheets/hour | 4500 |
| Max. paper width | 105.5 cm |
|---|---|
| Min. paper width | 48 cm |
Italy
1990
| Max. paper length | 102 cm |
|---|---|
| Min. paper length | 40 cm |
| Possible actions | Die-Cut + Emboss |
| Max. paper width | 72 cm |
|---|---|
| Min. paper width | 35 cm |
| Max sheets/hour | 7500 |
Italy
2010
| Possible actions | Hot Foil Stamping |
|---|
Austria
2011
| Max. paper length | 1040 cm |
|---|---|
| Min. paper length | 400 cm |
| Possible actions | Emboss + Hot Foil |
| Honeycomb Chase | Yes |
| Max. paper width | 740 cm |
|---|---|
| Min. paper width | 350 cm |
| Max sheets/hour | 7500 |
France
2001
| Max. paper length | 104 cm |
|---|---|
| Min. paper length | 40 cm |
| Possible actions | Die Cut |
| Max. paper width | 74 cm |
|---|---|
| Min. paper width | 35 cm |
| Max sheets/hour | 8000 |
France
1998
| Max. paper length | 72 cm |
|---|---|
| Min. paper length | 35 cm |
| Max. paper width | 104 cm |
|---|---|
| Min. paper width | 40 cm |
Turkey
1978
| Max. paper length | 1420 cm |
|---|---|
| Max sheets/hour | 4000 |
| Max. paper width | 1020 cm |
|---|
Turkey
2005
Turkey
1999
Bulgaria
1969
| Max. paper length | 142 cm |
|---|---|
| Min. paper length | 70 cm |
| Possible actions | Die Cut |
| Max. paper width | 102 cm |
|---|---|
| Min. paper width | 50 cm |
| Max sheets/hour | 4500 |
Italy
1968
| Max. paper length | 126 cm |
|---|---|
| Min. paper length | 50 cm |
| Max. paper width | 92 cm |
|---|---|
| Min. paper width | 35 cm |
Germany
2003
| Max. paper length | 106 cm |
|---|---|
| Min. paper length | 40 cm |
| Possible actions | Die Cut |
| Max. paper width | 76 cm |
|---|---|
| Min. paper width | 35 cm |
| Max sheets/hour | 12000 |
Italy
1975
| Max. paper length | 126 cm |
|---|---|
| Min. paper length | 50 cm |
| Max. paper width | 92 cm |
|---|---|
| Min. paper width | 35 cm |
Italy
1964
| Max. paper length | 126 cm |
|---|---|
| Min. paper length | 50 cm |
| Possible actions | Die Cut |
| Honeycomb Chase | No |
| Max. paper width | 90 cm |
|---|---|
| Min. paper width | 35 cm |
| Max sheets/hour | 5000 |
Germany
1989
| Max. paper length | 1420 cm |
|---|---|
| Min. paper length | 700 cm |
| Max sheets/hour | 6500 |
| Max. paper width | 1020 cm |
|---|---|
| Min. paper width | 500 cm |
Poland
| Max. paper length | 108 cm |
|---|---|
| Min. paper length | 35 cm |
| Possible actions | Die Cut |
| Max. paper width | 78 cm |
|---|---|
| Min. paper width | 29.5 cm |
| Max sheets/hour | 4500 |
Turkey
1974
| Max. paper length | 1260 cm |
|---|---|
| Min. paper length | 500 cm |
| Max sheets/hour | 4500 |
| Max. paper width | 920 cm |
|---|---|
| Min. paper width | 350 cm |
Germany
| Max. paper length | 102 cm |
|---|---|
| Min. paper length | 40 cm |
| Max sheets/hour | 8000 |
| Max. paper width | 72 cm |
|---|---|
| Min. paper width | 35 cm |
| Max. paper length | cm |
|---|---|
| Min. paper length | cm |
| Possible actions | |
| Honeycomb Chase |
| Max. paper width | cm |
|---|---|
| Min. paper width | cm |
| Max sheets/hour |
Germany
1987
| Max. paper length | cm |
|---|---|
| Min. paper length | cm |
| Possible actions | |
| Honeycomb Chase |
| Max. paper width | cm |
|---|---|
| Min. paper width | cm |
| Max sheets/hour |
Germany
1994
| Max. paper length | cm |
|---|---|
| Min. paper length | cm |
| Possible actions | |
| Honeycomb Chase |
| Max. paper width | cm |
|---|---|
| Min. paper width | cm |
| Max sheets/hour |
Italy
1980
| Max. paper length | 142 cm |
|---|---|
| Min. paper length | 70 cm |
| Possible actions | Die Cut |
| Honeycomb Chase | Yes |
| Max. paper width | 102 cm |
|---|---|
| Min. paper width | 50 cm |
| Max sheets/hour | 6500 |
Italy
1990
| Max. paper length | 142 cm |
|---|---|
| Min. paper length | 70 cm |
| Possible actions | Die Cut |
| Max. paper width | 102 cm |
|---|---|
| Min. paper width | 50 cm |
| Max sheets/hour | 8500 |
Germany
1982
Germany
2002
Germany
1981
| Max. paper length | cm |
|---|---|
| Min. paper length | cm |
| Possible actions | |
| Honeycomb Chase |
| Max. paper width | cm |
|---|---|
| Min. paper width | cm |
| Max sheets/hour |
Tunisia
1988
| Max. paper length | 102 cm |
|---|---|
| Min. paper length | 40 cm |
| Max sheets/hour | 8000 |
| Max. paper width | 72 cm |
|---|---|
| Min. paper width | 35 cm |
Bobst Sp 1420 1985 Модифициран за горещо щамповане и щанцоване
Bobst Sp 1420 1985 Upraveno pro horké ražení a vysekávání
Bobst Sp 1420 1985 Modificeret til varmstempling og udstansning
Bobst Sp 1420 1985, modifiziert für Heißprägen und Stanzen
Bobst Sp 1420 1985 Τροποποιημένο για Hot Stamping και Die Cutting
Bobst Sp 1420 1985 Modified For Hot Stamping And Die Cutting
Bobst Sp 1420 1985 Modificada Para Estampación En Caliente Y Troquelado
Bobst Sp 1420 1985 modifié pour l'estampage à chaud et le découpage
Bobst Sp 1420 1985 Modificiran za vruće utiskivanje i rezanje
Bobst Sp 1420 1985 Melegbélyegzésre és stancolásra módosított
Bobst Sp 1420 1985 Modificata Per Stampa A Caldo E Fustelatura
Bobst Sp 1420 1985, modifikuotas karštam štampavimui ir pjovimui
Bobst Sp 1420 1985 aangepast voor heet stempelen en stansen
Bobst Sp 1420 1985 zmodyfikowany do tłoczenia na gorąco i sztancowania
Bobst Sp 1420 1985 modificado para estampagem a quente e corte
Bobst Sp 1420 1985 Modificat pentru ștanțare la cald și tăiere
Bobst Sp 1420 1985 г., модифицированный для горячей штамповки и высечки
Bobst Sp 1420 1985 Modifikovan za vruće štancanje i sečenje
Bobst Sp 1420 1985 Modifierad för varmstansning och stansning
Bobst Sp 1420 1985 Sıcak Damgalama ve Kalıp Kesimi İçin Modifiye Edildi
EN
- Languages
English (GB)