| Manufacturer | Bobst |
|---|---|
| Model | SP 142 CER |
| Year | 1990 |
| Location | Italy
|
| Category | Die-cutters / Embossers / Hot foil |
| Max. paper length | 142 cm |
| Max. paper width | 102 cm |
| Min. paper length | 70 cm |
| Min. paper width | 50 cm |
| Possible actions | Die Cut |
| Max sheets/hour | 8500 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Bobst SP 142 CER |
| Last availability date | 30/10/2026 |
| Product id | P261028210 |
| Language |
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
|
Bobst SP 142 CER die-cutting machine, manufactured in 1990. The machine has a sheet-feed table with a pre-register device, laterally guided transport belts with automatic disengagement, and adjustable side blowers marked for the Centerline system. Sheet handling features listed include electronic sheet-travel control, a sheet synchronizer with LED indicator, pile-height control, automatic lateral pile adjustment using non-contact probes and photocells, and a manual Non-Stop device. The specification also lists automatic sheet insertion, automatic pallet changing with a photoelectric safety barrier, and upper and lower Non-Stop bars.
The machine is equipped with Bobst-Electronic machine management, a main motor with frequency-converter control, and a control cabinet cooling unit. Control panels with buttons, switches, indicator lights and displays are present. The central processing area, feed table, and a conveyor or transfer section with rollers and side rails are visible. The listed die-cutting equipment includes a Centerline quick-change system, frame-centering and closing equipment, an electronic die-cutting-force probe, motorized cutting-force adjustment, oil conditioning, and a Bernoulli-system braking device.
Included tooling and equipment listed are upper and lower drawer frames, upper extraction equipment with extractor holders and sets of extractors, lower extraction equipment with rods and telescopic needles, a universal upper tool, adjustable lower tool, cutting plates, support plate, and fixing materials for extraction and separation tools. Additional listed features include a residual-grid evacuation belt and braking brush, stack-lowering safety equipment, and an automatic sheet insertion and drawer-sheet presence control system.
The machine’s exterior shows signs of use, including surface marks and scuffs, with chipped and worn paint along the front edge of the feed-table frame. The central section is open, exposing internal mechanisms.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Platform with safety bar
Control cabinet cooling unit
Gripper bars
Bobst-Electronic system for managing the machine
Main motor with frequency converter control
Centerline system for quick job changeover
Electronic device for sheet travel control
Manual Non-Stop device
Automatic lateral pile adjusting using non-contact probes (with photocells)
Side blowers adjustable with Centerline marks
Suction unit
Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill
Feed table with pre-register device that ensures smooth arrival of the sheets to the front teams
Control of the height of the pile on the front edge thanks to a photoelectric cell, with interlocking of the suction unit position according to the top and rear part of the pile
Safety system for lowering the pile tray
Feed table covered with an anti-static stainless steel plate
Sheet synchronizer for adjustable running which allows you to adapt the cycle of the feeder to that of the platen with LED indicator
Laterally guided transport belts with automatic disengagement
Feed table covered with an anti-static stainless steel plate
Feed table with laterally guided transport belts with automatic disengagement
Die-cutting device without gripper band
Oil conditioning unit for die cutting stability. Machine oil temperature maintenance system with temperature display. Programmable preheating system
Centering and closing the die-cutting equipment
Automatic closing of the frame and support plate
Closing of the frame towards the upper block
Measurement of the die-cutting force using an electronic probe
Support plate in synthetic material. For the vacuum system
Motorized cutting force adjustment Via button
Braking device via "Bernoulli" system
2 Upper frames with fixed bottom (E-1). Bottom sheet, 2 mm thick and synthetic protection plate, 1 mm thick
2 Cutting plates (E-4)
Gripper reopening device
3 drawer frame system
Braking device via "Bernoulli" system
1 Upper drawer frame (F-2)
Upper extraction equipment (F-21). Equipment needed to make an extraction tool, including bars, fixing brackets, extractor holders and sets of extractors of 3, 5 and 10 mm diameter
Fixing material for extraction tool (F-22). Including fixing bars and brackets
1 Central drawer frame
1 Extraction table fastening material (F-75)
1 Lower drawer frame (F-8)
1 Lower Extraction Equipment (F-81). Trim extraction equipment, including rods and telescopic needles
Automatic sheet insertion device
Drawer sheet device with electrical control of the presence of the sheet in the drawer
Clamp opening device that allows the sheets to arrive in the stack
Automatic pallet change device. With photoelectric cell safety barrier (non-conductor side)
Automatic Non-Stop Device
Non-stop bars in high and low positions
Stack raising safety device
Belt for evacuation of trimmings or residual grid located at the end of the machine. It also allows the removal of a sheet with non-separated poses, for quality control
Residual grid braking brush
Braking device via "Bernoulli" system
1 Upper drawer frame (H-21)
1 Universal upper tool (H-25). Equipment necessary for the creation of a pose separation tool
1 Fixing material of a separating tool (H-26). For fixing the upper separation tools of fabricated poses. Recommended for repetitive work.
1 bottom drawer frame with fastening material (H-5). Allows you to attach a lower separation tool to manufactured poses
1 Adjustable lower tool (H-6). Adjustable tool includes: - universal frame (H-61) - material that allows you to assemble the separation grid
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 52 |
| Last activity | Oct. 31, 2026 |
70 years’ experience in 3th Generation family business
With more than 70 years’ experience, Camporese Macchine Grafiche Spa supplies machines and technology for Packaging and Printing Industries.
Camporese is run by third generation, is a successful company, well capitalized, with one-of-a-kind know-how, proud of its many achievement, internationally well-known, have a direct bearing on long-term business relationship with all its internal and external stakeholders.
Platform with safety bar
Control cabinet cooling unit
Gripper bars
Bobst-Electronic system for managing the machine
Main motor with frequency converter control
Centerline system for quick job changeover
Electronic device for sheet travel control
Manual Non-Stop device
Automatic lateral pile adjusting using non-contact probes (with photocells)
Side blowers adjustable with Centerline marks
Suction unit
Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill
Feed table with pre-register device that ensures smooth arrival of the sheets to the front teams
Control of the height of the pile on the front edge thanks to a photoelectric cell, with interlocking of the suction unit position according to the top and rear part of the pile
Safety system for lowering the pile tray
Feed table covered with an anti-static stainless steel plate
Sheet synchronizer for adjustable running which allows you to adapt the cycle of the feeder to that of the platen with LED indicator
Laterally guided transport belts with automatic disengagement
Feed table covered with an anti-static stainless steel plate
Feed table with laterally guided transport belts with automatic disengagement
Die-cutting device without gripper band
Oil conditioning unit for die cutting stability. Machine oil temperature maintenance system with temperature display. Programmable preheating system
Centering and closing the die-cutting equipment
Automatic closing of the frame and support plate
Closing of the frame towards the upper block
Measurement of the die-cutting force using an electronic probe
Support plate in synthetic material. For the vacuum system
Motorized cutting force adjustment Via button
Braking device via "Bernoulli" system
2 Upper frames with fixed bottom (E-1). Bottom sheet, 2 mm thick and synthetic protection plate, 1 mm thick
2 Cutting plates (E-4)
Gripper reopening device
3 drawer frame system
Braking device via "Bernoulli" system
1 Upper drawer frame (F-2)
Upper extraction equipment (F-21). Equipment needed to make an extraction tool, including bars, fixing brackets, extractor holders and sets of extractors of 3, 5 and 10 mm diameter
Fixing material for extraction tool (F-22). Including fixing bars and brackets
1 Central drawer frame
1 Extraction table fastening material (F-75)
1 Lower drawer frame (F-8)
1 Lower Extraction Equipment (F-81). Trim extraction equipment, including rods and telescopic needles
Automatic sheet insertion device
Drawer sheet device with electrical control of the presence of the sheet in the drawer
Clamp opening device that allows the sheets to arrive in the stack
Automatic pallet change device. With photoelectric cell safety barrier (non-conductor side)
Automatic Non-Stop Device
Non-stop bars in high and low positions
Stack raising safety device
Belt for evacuation of trimmings or residual grid located at the end of the machine. It also allows the removal of a sheet with non-separated poses, for quality control
Residual grid braking brush
Braking device via "Bernoulli" system
1 Upper drawer frame (H-21)
1 Universal upper tool (H-25). Equipment necessary for the creation of a pose separation tool
1 Fixing material of a separating tool (H-26). For fixing the upper separation tools of fabricated poses. Recommended for repetitive work.
1 bottom drawer frame with fastening material (H-5). Allows you to attach a lower separation tool to manufactured poses
1 Adjustable lower tool (H-6). Adjustable tool includes: - universal frame (H-61) - material that allows you to assemble the separation grid
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Die-cutters / Embossers / Hot foil |
| Max. paper length | 142 cm |
| Max. paper width | 102 cm |
| Min. paper length | 70 cm |
| Min. paper width | 50 cm |
| Possible actions | Die Cut |
| Max sheets/hour | 8500 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Bobst SP 142 CER |
| Last availability date | 30/10/2026 |
| Product id | P261028210 |
| Language |
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
Bobst SP 142 CER
|
Bobst SP 142 CER die-cutting machine, manufactured in 1990. The machine has a sheet-feed table with a pre-register device, laterally guided transport belts with automatic disengagement, and adjustable side blowers marked for the Centerline system. Sheet handling features listed include electronic sheet-travel control, a sheet synchronizer with LED indicator, pile-height control, automatic lateral pile adjustment using non-contact probes and photocells, and a manual Non-Stop device. The specification also lists automatic sheet insertion, automatic pallet changing with a photoelectric safety barrier, and upper and lower Non-Stop bars.
The machine is equipped with Bobst-Electronic machine management, a main motor with frequency-converter control, and a control cabinet cooling unit. Control panels with buttons, switches, indicator lights and displays are present. The central processing area, feed table, and a conveyor or transfer section with rollers and side rails are visible. The listed die-cutting equipment includes a Centerline quick-change system, frame-centering and closing equipment, an electronic die-cutting-force probe, motorized cutting-force adjustment, oil conditioning, and a Bernoulli-system braking device.
Included tooling and equipment listed are upper and lower drawer frames, upper extraction equipment with extractor holders and sets of extractors, lower extraction equipment with rods and telescopic needles, a universal upper tool, adjustable lower tool, cutting plates, support plate, and fixing materials for extraction and separation tools. Additional listed features include a residual-grid evacuation belt and braking brush, stack-lowering safety equipment, and an automatic sheet insertion and drawer-sheet presence control system.
The machine’s exterior shows signs of use, including surface marks and scuffs, with chipped and worn paint along the front edge of the feed-table frame. The central section is open, exposing internal mechanisms.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 52 |
| Last activity | Oct. 31, 2026 |
70 years’ experience in 3th Generation family business
With more than 70 years’ experience, Camporese Macchine Grafiche Spa supplies machines and technology for Packaging and Printing Industries.
Camporese is run by third generation, is a successful company, well capitalized, with one-of-a-kind know-how, proud of its many achievement, internationally well-known, have a direct bearing on long-term business relationship with all its internal and external stakeholders.
EN
- Languages
English (GB)