| Manufacturer | Bobst |
|---|---|
| Model | VISIONFOIL 104 |
| Year | 2011 |
| Location | Austria
|
Machine: BOBST VISIONFOIL 104 (manufacturer: Bobst, year manufactured: 2011). Intended functions: embossing and hot-foil application (Possible actions: Emboss + Hot Foil). Sheet size capability (as provided): Max. paper length 1040.0 cm; Max. paper width 740.0 cm; Min. paper length 400.0 cm; Min. paper width 350.0 cm. Rated maximum production speed (as provided): 7500.0 sheets/hour. Honeycomb chase: Yes. Machine footprint (as provided): length 6500.0 mm, width 6000.0 mm, height 2200.0 mm.
Key specifications and accessories (from the provided description): embossing and hot-foil unit with sheet-size range as above; foil feed/web advance shafts noted as standard; heating with multiple zones and adjustable temperature (details in original technical sheet). A foundation changeover table (third-party product) and honeycomb base for blind embossing are listed as available options. Platen conditioning (Bobst platen service) is reported as having been carried out. Package sale options have been indicated in the original listing.
Controls and visible components: the machine is fitted with a touchscreen HMI with numeric readouts and function keys (labelled S1–S5 and additional function keys), a control console with green start and red stop pushbuttons and an emergency stop, and a front access panel with a large framed viewing window and central handle. Branding and model labelling (BOBST / Visionfoil) are present. Feed and tooling areas include rollers and metal guide rails; braided hoses, metal tubing, clamps and fluid/air fittings are attached to the frame, with protective caps on some hose ends. A perforated/vent panel is present on the side.
Condition: listed as "very good" in the provided description. Options: the listing notes possible fitting of a film brake brush or, alternatively, a suction system/tube cutter with a hopper.
Note: Numerical values and service statements are reproduced from the supplied data. No additional performance claims, run-hours, or test/warranty status have been added.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical specifications BOBST VISIONFOIL 104
Max. sheet size 1,040 × 740 mm
Min. sheet size 400 × 350 mm
Max. embossing/hot foil area 1,010 × 702 mm
Production speed up to 7,500 sheets/h
Embossing force up to 2.6 MN (286 US tonnes)
Foil feed shafts / web advance shafts: 2 standard
Foil width: 25–1,020 mm
Max. roll diameter: 250 mm
Heating temperature: 20–160 °C
Heating zones: 12, individually controllable
Paper from 80 g/m²
Cardboard/solid board up to 2,000 g/m²
Corrugated board up to 4 mm
Machine length approx. 6.50 m
Machine width approx. 6.00 m
Machine height approx. 2.20 m
4 honeycomb panels
Foundation changeover table (third-party product)
Machine raised by 300 mm
The machine is fitted with a film brake brush (not visible in the video) or, if a suction system/tube cutter is fitted, a hopper system!
High-performance machine for stable film transport even at high speeds and with long film feeds! Extremely short set-up times for sheet feed and film feed! Not a Chinese-made Bobst BMA replica!
Machine has only 14,000 hours!
Hsdbqmnjzt Iduol Ajnt
Condition: very good!
Bobst Platen Conditioning carried out (platen service) 5/26
Can be viewed in production at any time – in fact, we’d welcome a visit!
Available December/January 2026/27
Direct sale to a production company preferred! No dealer options available!
Also available as a package with a Bobst 102E2 (including a changeover table and honeycomb base for blind embossing)!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Can this Bobst VISIONFOIL 104 be viewed running?
This Bobst VISIONFOIL 104 die-cutting machine can be viewed in operation.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2017 |
| Offers online | 4 |
| Last activity | Nov. 1, 2026 |
Technical specifications BOBST VISIONFOIL 104
Max. sheet size 1,040 × 740 mm
Min. sheet size 400 × 350 mm
Max. embossing/hot foil area 1,010 × 702 mm
Production speed up to 7,500 sheets/h
Embossing force up to 2.6 MN (286 US tonnes)
Foil feed shafts / web advance shafts: 2 standard
Foil width: 25–1,020 mm
Max. roll diameter: 250 mm
Heating temperature: 20–160 °C
Heating zones: 12, individually controllable
Paper from 80 g/m²
Cardboard/solid board up to 2,000 g/m²
Corrugated board up to 4 mm
Machine length approx. 6.50 m
Machine width approx. 6.00 m
Machine height approx. 2.20 m
4 honeycomb panels
Foundation changeover table (third-party product)
Machine raised by 300 mm
The machine is fitted with a film brake brush (not visible in the video) or, if a suction system/tube cutter is fitted, a hopper system!
High-performance machine for stable film transport even at high speeds and with long film feeds! Extremely short set-up times for sheet feed and film feed! Not a Chinese-made Bobst BMA replica!
Machine has only 14,000 hours!
Hsdbqmnjzt Iduol Ajnt
Condition: very good!
Bobst Platen Conditioning carried out (platen service) 5/26
Can be viewed in production at any time – in fact, we’d welcome a visit!
Available December/January 2026/27
Direct sale to a production company preferred! No dealer options available!
Also available as a package with a Bobst 102E2 (including a changeover table and honeycomb base for blind embossing)!
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Can this Bobst VISIONFOIL 104 be viewed running?
This Bobst VISIONFOIL 104 die-cutting machine can be viewed in operation.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine: BOBST VISIONFOIL 104 (manufacturer: Bobst, year manufactured: 2011). Intended functions: embossing and hot-foil application (Possible actions: Emboss + Hot Foil). Sheet size capability (as provided): Max. paper length 1040.0 cm; Max. paper width 740.0 cm; Min. paper length 400.0 cm; Min. paper width 350.0 cm. Rated maximum production speed (as provided): 7500.0 sheets/hour. Honeycomb chase: Yes. Machine footprint (as provided): length 6500.0 mm, width 6000.0 mm, height 2200.0 mm.
Key specifications and accessories (from the provided description): embossing and hot-foil unit with sheet-size range as above; foil feed/web advance shafts noted as standard; heating with multiple zones and adjustable temperature (details in original technical sheet). A foundation changeover table (third-party product) and honeycomb base for blind embossing are listed as available options. Platen conditioning (Bobst platen service) is reported as having been carried out. Package sale options have been indicated in the original listing.
Controls and visible components: the machine is fitted with a touchscreen HMI with numeric readouts and function keys (labelled S1–S5 and additional function keys), a control console with green start and red stop pushbuttons and an emergency stop, and a front access panel with a large framed viewing window and central handle. Branding and model labelling (BOBST / Visionfoil) are present. Feed and tooling areas include rollers and metal guide rails; braided hoses, metal tubing, clamps and fluid/air fittings are attached to the frame, with protective caps on some hose ends. A perforated/vent panel is present on the side.
Condition: listed as "very good" in the provided description. Options: the listing notes possible fitting of a film brake brush or, alternatively, a suction system/tube cutter with a hopper.
Note: Numerical values and service statements are reproduced from the supplied data. No additional performance claims, run-hours, or test/warranty status have been added.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2017 |
| Offers online | 4 |
| Last activity | Nov. 1, 2026 |
щанцоване Bobst VISIONFOIL 104
Vysekávací stroj Bobst VISIONFOIL 104
Bobst VISIONFOIL 104 Udstanser
Bobst VISIONFOIL 104 Stanze
Κόφτης Bobst VISIONFOIL 104
Bobst VISIONFOIL 104 Die-cutter
Troqueladora Bobst VISIONFOIL 104
Presse de découpe Bobst VISIONFOIL 104
Izrezivač Bobst VISIONFOIL 104
Bobst VISIONFOIL 104 Vágószerszám
Fustellatrice Bobst VISIONFOIL 104
Bobst VISIONFOIL 104 Štampas
Bobst VISIONFOIL 104 Stansmachine
Maszyna sztancująca Bobst VISIONFOIL 104
Cortador Bobst VISIONFOIL 104
Decupator Bobst VISIONFOIL 104
Bobst VISIONFOIL 104 Высекальная машина
Die-cutter Bobst VISIONFOIL 104
Bobst VISIONFOIL 104 Skärare
Kesim Bobst VISIONFOIL 104
EN
- Languages
English (GB)