9,140 €
Make an offerContact us to receive an offer.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Last availability date | 09/10/2023 |
This listing is for a BAILEIGH SH-5210 hydraulic guillotine sheet metal shear, manufactured in 2019. It is designed for precise cutting of sheet metal and features a robust welded steel frame that ensures durability and accuracy. The shear accommodates sheet lengths up to 52 inches and can handle mild steel up to 10 gauge thickness, with a minimum capacity of 24 gauge mild steel.
Powered by a 5 hp motor running on 220-volt single-phase power, the machine can operate at speeds of up to 28 strokes per minute. The adjustable 24-inch backgauge allows for precise repeatability in cuts. Front support arms and metal table guides help keep the material square to the blade during operation.
The operator console includes three modes: inch mode for jogging the blade down to the material, single mode for one cut cycle per foot pedal push, and auto mode for continuous cycling while the pedal is held down. The machine comes equipped with high carbon chromium blades that have four shearing edges, allowing the user to rotate the blades to extend their lifespan and reduce replacement costs.
Hydraulic hold-downs clamp the sheet firmly to the table, preventing material lift and enhancing blade life. The machine's rigid, fully welded steel plate construction minimizes flexing, contributing to long-term cutting accuracy.
Visible signs of use include scratches and wear on metal surfaces, consistent with normal industrial use. A yellow hydraulic ram or safety guard is located on the left side of the machine. The front panel features warning labels and a CE certification label, indicating compliance with relevant safety standards. Metal arms or supports extend outward from the front to provide additional material support.
This BAILEIGH SH-5210 is a reliable industrial hydraulic shear suitable for various sheet metal cutting applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Very good condition sheet metal shear guillotine with little use
https://www.baileigh.com/sheet-metal-shear-sh-5210
This hydraulic shear was one of the machines that got us started and built Baileigh’s quality reputation. With its welded steel frame, the SH-5210 sheet metal shear makes perfect cuts every time.
52” length.
10 gauge mild steel maximum capacity.
Minimum capacity of 24 gauge mild steel.
5 hp motor runs on 220-volt single-phase power.
Up to 28 strokes per minute.
Adjustable 24” backgauge ensures precise repeatability.
Front support arms and table guides keep the material square to the blade.
3 modes on the operator console:
Inch mode: Jog the control and ease the blade down to the material.
Single mode: Make one cut cycle per foot pedal push.
Auto mode: Continue cycling as you hold the pedal down.
This hydraulic shear comes standard with high carbon chromium blades.
Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money.
Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
This 10 gauge sheet metal shear is covered by a 1-year parts warranty.
We stock replacement parts, including blades, in house for fast shipping.
Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | July 28, 2025 |
Very good condition sheet metal shear guillotine with little use
https://www.baileigh.com/sheet-metal-shear-sh-5210
This hydraulic shear was one of the machines that got us started and built Baileigh’s quality reputation. With its welded steel frame, the SH-5210 sheet metal shear makes perfect cuts every time.
52” length.
10 gauge mild steel maximum capacity.
Minimum capacity of 24 gauge mild steel.
5 hp motor runs on 220-volt single-phase power.
Up to 28 strokes per minute.
Adjustable 24” backgauge ensures precise repeatability.
Front support arms and table guides keep the material square to the blade.
3 modes on the operator console:
Inch mode: Jog the control and ease the blade down to the material.
Single mode: Make one cut cycle per foot pedal push.
Auto mode: Continue cycling as you hold the pedal down.
This hydraulic shear comes standard with high carbon chromium blades.
Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money.
Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
This 10 gauge sheet metal shear is covered by a 1-year parts warranty.
We stock replacement parts, including blades, in house for fast shipping.
Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Last availability date | 09/10/2023 |
This listing is for a BAILEIGH SH-5210 hydraulic guillotine sheet metal shear, manufactured in 2019. It is designed for precise cutting of sheet metal and features a robust welded steel frame that ensures durability and accuracy. The shear accommodates sheet lengths up to 52 inches and can handle mild steel up to 10 gauge thickness, with a minimum capacity of 24 gauge mild steel.
Powered by a 5 hp motor running on 220-volt single-phase power, the machine can operate at speeds of up to 28 strokes per minute. The adjustable 24-inch backgauge allows for precise repeatability in cuts. Front support arms and metal table guides help keep the material square to the blade during operation.
The operator console includes three modes: inch mode for jogging the blade down to the material, single mode for one cut cycle per foot pedal push, and auto mode for continuous cycling while the pedal is held down. The machine comes equipped with high carbon chromium blades that have four shearing edges, allowing the user to rotate the blades to extend their lifespan and reduce replacement costs.
Hydraulic hold-downs clamp the sheet firmly to the table, preventing material lift and enhancing blade life. The machine's rigid, fully welded steel plate construction minimizes flexing, contributing to long-term cutting accuracy.
Visible signs of use include scratches and wear on metal surfaces, consistent with normal industrial use. A yellow hydraulic ram or safety guard is located on the left side of the machine. The front panel features warning labels and a CE certification label, indicating compliance with relevant safety standards. Metal arms or supports extend outward from the front to provide additional material support.
This BAILEIGH SH-5210 is a reliable industrial hydraulic shear suitable for various sheet metal cutting applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | July 28, 2025 |
BAILEIGH SH-5210
Hydraulické nůžky / gilotiny BAILEIGH SH-5210
BAILEIGH SH-5210
BAILEIGH SH-5210 Hydraulische Blechschere
BAILEIGH SH-5210
BAILEIGH SH-5210 hydraulic shear
Cizalla guillotina hidráulica BAILEIGH SH-5210
Cisaille guillotine hydraulique BAILEIGH SH-5210
BAILEIGH SH-5210
BAILEIGH SH-5210
Cesoia ghigliottina idraulica BAILEIGH SH-5210
BAILEIGH SH-5210
BAILEIGH SH-5210
Nożyce gilotynowe hydrauliczne BAILEIGH SH-5210
BAILEIGH SH-5210
BAILEIGH SH-5210
BAILEIGH SH-5210 Гидравлические гильотинные ножницы
BAILEIGH SH-5210
BAILEIGH SH-5210
Hidrolik giyotin makas BAILEIGH SH-5210
EN
- Languages
English (GB)