| Manufacturer | DURMA |
|---|---|
| Model | SBT 3006 |
| Year | 2015 |
| Location | Austria
|
DURMA SBT 3006 hydraulic guillotine shear (2015) — summary and key specifications:
- Manufacturer / model / year: DURMA SBT 3006, year manufactured 2015.
- Cutting capacity: cutting length 3,100 mm. Maximum sheet thickness for structural steel 6 mm; maximum sheet thickness for stainless steel 4 mm.
- Cutting parameters: maximum cutting angle 1.5°; stroke rate 15 strokes per minute. Backgauge adjustment up to 1,000 mm.
- Drive and service systems: motor power 15 kW; oil tank capacity 200 l.
- Machine size and mass: length 4,110 mm; width 2,200 mm; height 2,100 mm; weight 7,300 kg.
Standard features and equipment described:
- D-Touch 7 NC preset control with touchscreen, including settings for rip fence, cut length, piece count and a USB port.
- Motorised rip fence (ball screw drive) with travel up to 1,000 mm and fold-up design.
- Pneumatic sheet metal holding device and hydraulic hold-downs positioned close to the cutting edge.
- Oscillating cut design; single and continuous stroke operation.
- Central manual cutting gap adjustment; lower blade reversible 4 ways, upper blade reversible 2 ways; provisions for easy blade replacement and regrinding.
- Fold-up finger guard (1,000 mm); photoelectric sensors at the rear; cutting line illumination.
- Wide support table with sliding balls; sheet support arms (two, 1,000 mm) with T-slot; one side stop 1,500 mm with scale, T-slot and tilting cam.
- Control panel mounted on a swivel arm and foot switch. Piece counter included. Oil fill point noted.
Documentation and commercial conditions listed:
- Operating instructions in German and CE Declaration of Conformity.
- Seller notes availability of detailed photos and functional videos, on-site live test at their premises, personalised live video demonstrations, and a 14-day right of return.
Notes and caution:
- All specifications and equipment above are taken from the provided machine details and description. No additional testing, operational status, or warranty claims are stated or implied here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Cutting length 3100 mm
Max. sheet thickness – structural steel 6 mm
Max. sheet thickness – stainless steel 4 mm
Stroke rate 15 per minute
Cutting angle 1.5 °
Backgauge 1000 mm
Motor power 15 kW
Oil tank 200 l
Length 4110 mm
Width 2200 mm
Overall width with support arm and rear guard 3790 mm
Height 2100 mm
Weight 7300 kg
Description
With pneumatic sheet metal holding device
Oscillating cut design
D-Touch 7 NC preset control with touch screen for rip fence, cut length, piece count, USB port
Motorised rip fence up to 1,000 mm on ball screws, fold-up design
Clearly laid-out control panel mounted on a swivel arm
Hydraulic hold-down devices positioned close to the cutting edge
Foot switch
Central manual cutting gap adjustment
Cutting line illumination
Wide support table with sliding balls
Piece counter
Single and continuous stroke
Fold-up finger guard 1,000 mm
1 side stop 1,500 mm with scale, T-slot and tilting cam
2 sheet support arms, 1,000 mm, with T-slot
Easy blade replacement and regrinding
Adjustable cutting length for cost-effective machining
Lower blade reversible 4 ways
Upper blade reversible 2 ways
Oil fill
Photoelectric sensors at the rear of the machine
Qualified after-sales service
Operating instructions in GERMAN with CE Declaration of Conformity
• Honest insights: detailed photos & functional videos showing the machine’s current condition
• On-site live check: live test at our premises
• Digital demonstration: personalised live demonstration via video call
• Risk-free purchase: 14-day right of return
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 37 |
| Last activity | Oct. 31, 2026 |
Trust in Hesse + Co’s more than 75 years of experience! Hesse + Co is not only your reliable partner for new and used sheet metal working machines and tools, but is also happy to assist you with services such as repairs, maintenance, safety inspections, spare parts supply for new and used machines, as well as commissioning, machine relocations, and retrofit conversions.
In Hesse + Co’s 2,000 m² showroom in Wiener Neudorf, just 20 minutes from Vienna International Airport, more than 300 new and used sheet metal and machine tools working machines are always available for viewing. Trained service technicians are happy to demonstrate any of the machines at any time.
Hesse + Co places great emphasis on customer satisfaction and offers not only high-quality machines but also excellent customer service. The experienced team supports customers throughout the entire purchasing process and provides training, maintenance services, and technical support to ensure that the machines always operate at peak performance.
Cutting length 3100 mm
Max. sheet thickness – structural steel 6 mm
Max. sheet thickness – stainless steel 4 mm
Stroke rate 15 per minute
Cutting angle 1.5 °
Backgauge 1000 mm
Motor power 15 kW
Oil tank 200 l
Length 4110 mm
Width 2200 mm
Overall width with support arm and rear guard 3790 mm
Height 2100 mm
Weight 7300 kg
Description
With pneumatic sheet metal holding device
Oscillating cut design
D-Touch 7 NC preset control with touch screen for rip fence, cut length, piece count, USB port
Motorised rip fence up to 1,000 mm on ball screws, fold-up design
Clearly laid-out control panel mounted on a swivel arm
Hydraulic hold-down devices positioned close to the cutting edge
Foot switch
Central manual cutting gap adjustment
Cutting line illumination
Wide support table with sliding balls
Piece counter
Single and continuous stroke
Fold-up finger guard 1,000 mm
1 side stop 1,500 mm with scale, T-slot and tilting cam
2 sheet support arms, 1,000 mm, with T-slot
Easy blade replacement and regrinding
Adjustable cutting length for cost-effective machining
Lower blade reversible 4 ways
Upper blade reversible 2 ways
Oil fill
Photoelectric sensors at the rear of the machine
Qualified after-sales service
Operating instructions in GERMAN with CE Declaration of Conformity
• Honest insights: detailed photos & functional videos showing the machine’s current condition
• On-site live check: live test at our premises
• Digital demonstration: personalised live demonstration via video call
• Risk-free purchase: 14-day right of return
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
DURMA SBT 3006 hydraulic guillotine shear (2015) — summary and key specifications:
- Manufacturer / model / year: DURMA SBT 3006, year manufactured 2015.
- Cutting capacity: cutting length 3,100 mm. Maximum sheet thickness for structural steel 6 mm; maximum sheet thickness for stainless steel 4 mm.
- Cutting parameters: maximum cutting angle 1.5°; stroke rate 15 strokes per minute. Backgauge adjustment up to 1,000 mm.
- Drive and service systems: motor power 15 kW; oil tank capacity 200 l.
- Machine size and mass: length 4,110 mm; width 2,200 mm; height 2,100 mm; weight 7,300 kg.
Standard features and equipment described:
- D-Touch 7 NC preset control with touchscreen, including settings for rip fence, cut length, piece count and a USB port.
- Motorised rip fence (ball screw drive) with travel up to 1,000 mm and fold-up design.
- Pneumatic sheet metal holding device and hydraulic hold-downs positioned close to the cutting edge.
- Oscillating cut design; single and continuous stroke operation.
- Central manual cutting gap adjustment; lower blade reversible 4 ways, upper blade reversible 2 ways; provisions for easy blade replacement and regrinding.
- Fold-up finger guard (1,000 mm); photoelectric sensors at the rear; cutting line illumination.
- Wide support table with sliding balls; sheet support arms (two, 1,000 mm) with T-slot; one side stop 1,500 mm with scale, T-slot and tilting cam.
- Control panel mounted on a swivel arm and foot switch. Piece counter included. Oil fill point noted.
Documentation and commercial conditions listed:
- Operating instructions in German and CE Declaration of Conformity.
- Seller notes availability of detailed photos and functional videos, on-site live test at their premises, personalised live video demonstrations, and a 14-day right of return.
Notes and caution:
- All specifications and equipment above are taken from the provided machine details and description. No additional testing, operational status, or warranty claims are stated or implied here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 37 |
| Last activity | Oct. 31, 2026 |
Trust in Hesse + Co’s more than 75 years of experience! Hesse + Co is not only your reliable partner for new and used sheet metal working machines and tools, but is also happy to assist you with services such as repairs, maintenance, safety inspections, spare parts supply for new and used machines, as well as commissioning, machine relocations, and retrofit conversions.
In Hesse + Co’s 2,000 m² showroom in Wiener Neudorf, just 20 minutes from Vienna International Airport, more than 300 new and used sheet metal and machine tools working machines are always available for viewing. Trained service technicians are happy to demonstrate any of the machines at any time.
Hesse + Co places great emphasis on customer satisfaction and offers not only high-quality machines but also excellent customer service. The experienced team supports customers throughout the entire purchasing process and provides training, maintenance services, and technical support to ensure that the machines always operate at peak performance.
Хидравлична гилотинна ножица DURMA SBT 3006
Hydraulické gilotinové nůžky DURMA SBT 3006
DURMA SBT 3006 Hydraulisk guillotinesaks
DURMA SBT 3006 Hydraulische Tafelschere
Υδραυλικά ψαλίδια γκιλοτίνας DURMA SBT 3006
DURMA SBT 3006 Hydraulic guillotine shear
Cizalla guillotina hidráulica DURMA SBT 3006
Cisaille guillotine hydraulique DURMA SBT 3006
Hidraulične giljotinske škare DURMA SBT 3006
DURMA SBT 3006 Hidraulikus lemezolló
Cesoia a ghigliottina idraulica DURMA SBT 3006
DURMA SBT 3006 Hidraulinės giljotininės žirklės
DURMA SBT 3006 Hydraulische guillotineschaar
Hydrauliczne nożyce gilotynowe DURMA SBT 3006
Guilhotina hidráulica DURMA SBT 3006
Foarfeci ghilotină hidraulice DURMA SBT 3006
DURMA SBT 3006 Гидравлические гильотинные ножницы
Hidraulične giljotinske makaze DURMA SBT 3006
DURMA SBT 3006 Hydraulisk giljotinsax
Hidrolik giyotin makası DURMA SBT 3006
EN
- Languages
English (GB)