9,500 €
Make an offerContact us to receive an offer.
| Cutting length | 3000 mm |
| Max. thickness | 6 mm |
| Back gauge type | Electric Backgauge |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Datasheet | Amada M-3060 |
| Last availability date | 18/07/2025 |
This listing features an AMADA M-3060 hydraulic guillotine shear, manufactured in 2001, designed for cutting sheet metal with a maximum thickness of 6.0 mm and a cutting length of up to 3000 mm (3 meters). The machine is suitable for precise metal cutting applications and includes an electric back gauge for accurate positioning of the material.
The shear has a working width of 3300 mm and is equipped with an electric back stop and an electric conveyor belt to facilitate efficient handling of cut materials. The design incorporates a low cutting edge angle, which helps minimize deformation and ensures burr-free cutting results.
The machine features a control panel located on the front right side, equipped with various buttons and a display screen to manage operations. An electric motor is installed underneath the right side of the machine, contributing to its hydraulic cutting mechanism. Metal support arms and guides are present on the front table to assist with material placement and alignment during cutting.
The machine shows signs of use, with visible dust and wear on its surface, but it remains structurally intact. Additional components visible include a control box with attached cables on the right side. Materials and metal parts are stored beside and underneath the machine, though these are not part of the sale.
Loading assistance and transport arrangements within Slovakia can be provided upon request. This AMADA M-3060 hydraulic shear is a robust solution for industrial metal cutting needs, combining precise electric backgauge control with a reliable hydraulic cutting system.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
for sheet metal up to a material thickness of 6.0 mm and a length of 3 metres. Suitable for metal cutting
In case of interest we can arrange loading of the machine and transport within Slovakia.
➡️ low cutting edge angle for minimum deformation and burr-free cutting
➡️ working width 3300 mm
➡️ electric back stop + electric conveyor belt
➡️ machine in very good technical condition
➡️ possibility to test on site
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | July 18, 2025 |
for sheet metal up to a material thickness of 6.0 mm and a length of 3 metres. Suitable for metal cutting
In case of interest we can arrange loading of the machine and transport within Slovakia.
➡️ low cutting edge angle for minimum deformation and burr-free cutting
➡️ working width 3300 mm
➡️ electric back stop + electric conveyor belt
➡️ machine in very good technical condition
➡️ possibility to test on site
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Cutting length | 3000 mm |
| Max. thickness | 6 mm |
| Back gauge type | Electric Backgauge |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Datasheet | Amada M-3060 |
| Last availability date | 18/07/2025 |
This listing features an AMADA M-3060 hydraulic guillotine shear, manufactured in 2001, designed for cutting sheet metal with a maximum thickness of 6.0 mm and a cutting length of up to 3000 mm (3 meters). The machine is suitable for precise metal cutting applications and includes an electric back gauge for accurate positioning of the material.
The shear has a working width of 3300 mm and is equipped with an electric back stop and an electric conveyor belt to facilitate efficient handling of cut materials. The design incorporates a low cutting edge angle, which helps minimize deformation and ensures burr-free cutting results.
The machine features a control panel located on the front right side, equipped with various buttons and a display screen to manage operations. An electric motor is installed underneath the right side of the machine, contributing to its hydraulic cutting mechanism. Metal support arms and guides are present on the front table to assist with material placement and alignment during cutting.
The machine shows signs of use, with visible dust and wear on its surface, but it remains structurally intact. Additional components visible include a control box with attached cables on the right side. Materials and metal parts are stored beside and underneath the machine, though these are not part of the sale.
Loading assistance and transport arrangements within Slovakia can be provided upon request. This AMADA M-3060 hydraulic shear is a robust solution for industrial metal cutting needs, combining precise electric backgauge control with a reliable hydraulic cutting system.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | July 18, 2025 |
хидравлична ножица AMADA M-3060
Hydraulické nůžky / gilotiny AMADA M-3060
AMADA M-3060 hydraulisk saks
AMADA M-3060 Hydraulische Blechschere
υδραυλική διάτμηση AMADA M-3060
AMADA M-3060 hydraulic shear
Cizalla guillotina hidráulica AMADA M-3060
Cisaille guillotine hydraulique AMADA M-3060
hidrauličke škare AMADA M-3060
AMADA M-3060 hidraulikus nyíró
Cesoia ghigliottina idraulica AMADA M-3060
hidraulinis kirpimas AMADA M-3060
AMADA M-3060 hydraulische schaar
Nożyce gilotynowe hydrauliczne AMADA M-3060
tesoura hidráulica AMADA M-3060
forfecare hidraulica AMADA M-3060
AMADA M-3060 Гидравлические гильотинные ножницы
hidraulične makaze AMADA M-3060
AMADA M-3060 hydraulisk sax
Hidrolik giyotin makas AMADA M-3060
EN
- Languages
English (GB)