Contact us to receive an offer.
| Manufacturer | Arburg |
|---|---|
| Model | 470 S 1300 -350 |
| Year | 1999 |
| Location | Poland
|
Injection Molding Machine Arburg 470 S 1300 - 350
Manufacturer: Arburg
Model: 470 S 1300 - 350
Year of Manufacture: 1999
Control System: Selogica
Closing System: Hydraulic
Technical Specifications:
- Clamping Force: 1300 kN (130 tons)
- Tie Bar Spacing (H x V): 470 mm x 470 mm
- Platen Dimensions: 650 mm x 650 mm
- Minimum Mould Size: 275 mm
- Maximum Opening Stroke: 575 mm
- Maximum Distance Between Plates: 850 mm
- Screw Diameter: 35 mm
- Injection Volume: 139 cm³
- Injection Weight: 117 grams (PS)
- Injection Pressure: 2500 bar
- Engine Power: 22 kW
- Heater Power: 10.2 kW
- Dimensions (L x W x H): 4500 mm x 1500 mm x 2200 mm
- Weight: 5100 kg
- Number of Heating Zones: 6
- Number of Cores: 1
- Bi-metal Screw: Yes
Additional Equipment:
- Hydraulic core pull: 1 unit
- Air valve: 1 unit
- Hot runner system
- Conveyor belt
Machine Description:
This Arburg 470 S 1300 - 350 injection molding machine features a hydraulic closing system with a clamping force of 130 tons, suitable for a wide range of molding applications. The machine is equipped with a bi-metal screw and six heating zones, providing precise temperature control. The platen size and tie bar spacing accommodate molds up to 650 mm square.
The machine frame is painted in turquoise and white, and it includes a protective yellow and transparent safety cover around the injection area, enhancing operator safety. The platen and tie bars are supported by four tie bars, with the platen showing some signs of use such as black marks but no visible damage. The control panel includes a screen and multiple buttons, including an emergency stop, although the screen was observed to be off.
Hydraulic hoses and an electric motor are mounted at the base of the machine, and the machine appears clean and well maintained externally, with no visible damage to critical components. This machine does not come equipped with a robot.
This injection molding machine is suitable for manufacturers looking for a reliable system with comprehensive features and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Injection molding machine Arburg 470 S 1300 - 350
Manufacturer: Arburg
Type: 470 S 1300 - 350
Year of manufacture: 1999
Control: Selogica
Closing system: Hydraulic
TECHNICAL DATA
Closing force: 1300 kN
Clearance between columns: 470 mm x 470 mm
Plate dimensions: 650 mm x 650 mm
Mould size: min 275 mm
Maximum opening path: 575 mm
Maximum distance between plates: 850 mm
Auger: 35 mm
Injection volume: 139 ccm
Injection weight: 117 grams PS
Injection pressure: 2500 bar
GENERAL
Engine: 22 kW
Heaters: 10.2 kW
Dimensions ( L x W x H): 4.6 m x 1.6 m x 2.2 m
Weight: 5100 kg
Service book
Control German language
ADDITIONAL EQUIPMENT
Hydraulic core: x1
Robot input
Air valve: x1
Hot runners
Conveyor belt
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 8 |
| Last activity | Oct. 24, 2026 |
Injection molding machine Arburg 470 S 1300 - 350
Manufacturer: Arburg
Type: 470 S 1300 - 350
Year of manufacture: 1999
Control: Selogica
Closing system: Hydraulic
TECHNICAL DATA
Closing force: 1300 kN
Clearance between columns: 470 mm x 470 mm
Plate dimensions: 650 mm x 650 mm
Mould size: min 275 mm
Maximum opening path: 575 mm
Maximum distance between plates: 850 mm
Auger: 35 mm
Injection volume: 139 ccm
Injection weight: 117 grams PS
Injection pressure: 2500 bar
GENERAL
Engine: 22 kW
Heaters: 10.2 kW
Dimensions ( L x W x H): 4.6 m x 1.6 m x 2.2 m
Weight: 5100 kg
Service book
Control German language
ADDITIONAL EQUIPMENT
Hydraulic core: x1
Robot input
Air valve: x1
Hot runners
Conveyor belt
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Injection Molding Machine Arburg 470 S 1300 - 350
Manufacturer: Arburg
Model: 470 S 1300 - 350
Year of Manufacture: 1999
Control System: Selogica
Closing System: Hydraulic
Technical Specifications:
- Clamping Force: 1300 kN (130 tons)
- Tie Bar Spacing (H x V): 470 mm x 470 mm
- Platen Dimensions: 650 mm x 650 mm
- Minimum Mould Size: 275 mm
- Maximum Opening Stroke: 575 mm
- Maximum Distance Between Plates: 850 mm
- Screw Diameter: 35 mm
- Injection Volume: 139 cm³
- Injection Weight: 117 grams (PS)
- Injection Pressure: 2500 bar
- Engine Power: 22 kW
- Heater Power: 10.2 kW
- Dimensions (L x W x H): 4500 mm x 1500 mm x 2200 mm
- Weight: 5100 kg
- Number of Heating Zones: 6
- Number of Cores: 1
- Bi-metal Screw: Yes
Additional Equipment:
- Hydraulic core pull: 1 unit
- Air valve: 1 unit
- Hot runner system
- Conveyor belt
Machine Description:
This Arburg 470 S 1300 - 350 injection molding machine features a hydraulic closing system with a clamping force of 130 tons, suitable for a wide range of molding applications. The machine is equipped with a bi-metal screw and six heating zones, providing precise temperature control. The platen size and tie bar spacing accommodate molds up to 650 mm square.
The machine frame is painted in turquoise and white, and it includes a protective yellow and transparent safety cover around the injection area, enhancing operator safety. The platen and tie bars are supported by four tie bars, with the platen showing some signs of use such as black marks but no visible damage. The control panel includes a screen and multiple buttons, including an emergency stop, although the screen was observed to be off.
Hydraulic hoses and an electric motor are mounted at the base of the machine, and the machine appears clean and well maintained externally, with no visible damage to critical components. This machine does not come equipped with a robot.
This injection molding machine is suitable for manufacturers looking for a reliable system with comprehensive features and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 8 |
| Last activity | Oct. 24, 2026 |
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
France
2006
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 392 cm³ |
| Pressure on material | 2000 bar |
| Platen width | 650 mm |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size | 250/750 |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Shot weight | 359 g |
| Platen length | 650 mm |
| Bi-metal screw | No |
| Robot interface | Euromap E 67 |
| Opening of the press | 750 mm |
| Clamping force | 1300 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot weight | 297 g |
| Platen length | 615 mm |
| Robot interface |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Pressure on material | 2080 bar |
| Platen width | 615 mm |
| Mould size | 350 mm |
| Clamping force | 35 T |
|---|---|
| Tie bar spacing (H) | 221 mm |
| Shot volume | 49 cm³ |
| Pressure on material | 2000 bar |
| Platen width | 250 mm |
| Equipped with robot | No |
| Number of cores | |
| Opening of the press | 200 mm |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 221 mm |
| Shot weight | 41 g |
| Platen length | 342 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 106 cm³ |
| Robot interface | Euromap 1000-150 / 60 |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Equipped with robot | Yes |
| Mould size | 350 |
Czech Republic
2005
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 144 cm³ |
| Pressure on material | 1820 bar |
| Platen width | 570 mm |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 121 g |
| Platen length | 570 mm |
| Bi-metal screw | No |
| Robot interface | |
| Opening of the press | 500 mm |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 353 cm³ |
| Pressure on material | 1720 bar |
| Platen width | 715 mm |
| Robot interface | Euromap 12 |
| Opening of the press | 650 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Shot weight | 360 g |
| Platen length | 715 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Mould size | 250 |
Turkey
2001
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 320 mm |
| Robot interface |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Mould size |
| Clamping force | 130 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 139 cm³ |
| Pressure on material | 2500 bar |
| Platen width | 605 mm |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 127 g |
| Platen length | 605 mm |
| Robot interface |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 106 cm³ |
| Pressure on material | 2470 bar |
| Platen width | 569 mm |
| Opening of the press | 500 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 89 g |
| Platen length | 570 mm |
| Robot interface | |
| Mould size | 250mm min |
| Clamping force | 80 T |
|---|---|
| Shot volume | 30 cm³ |
| Pressure on material | 2340 bar |
| Mould size |
| Screw diameter | 22 mm |
|---|---|
| Shot weight | 27 g |
| Robot interface |
| Clamping force | 70 T |
|---|---|
| Tie bar spacing (H) | 320 mm |
| Shot volume | 188 cm³ |
| Pressure on material | 1390 bar |
| Opening of the press | 250 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Shot weight | 158 g |
| Robot interface | |
| Mould size |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 139 cm³ |
| Robot interface | 1500-350 |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Equipped with robot | Yes |
| Mould size | 250 |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Pressure on material | 2500 bar |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Robot interface |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 270 mm |
| Shot volume | 70 cm³ |
| Robot interface | 500-90 |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 270 mm |
| Equipped with robot | Yes |
| Mould size | 225 |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 520 mm |
| Shot volume | 427 cm³ |
| Opening of the press | 250 mm |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Robot interface | |
| Mould size |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 270 mm |
| Shot volume | 39 cm³ |
| Robot interface |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 270 mm |
| Bi-metal screw | Yes |
| Mould size |
Poland
2001
| Clamping force | 70 T |
|---|---|
| Tie bar spacing (H) | 320 mm |
| Shot volume | 144 cm³ |
| Pressure on material | 1820 bar |
| Platen width | 476 mm |
| Number of cores | 1 |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Shot weight | 132 g |
| Platen length | 476 mm |
| Robot interface | Yes |
| Mould size | min. 210 mm max 400 mm |
| Clamping force | 35 T |
|---|---|
| Tie bar spacing (H) | 270 mm |
| Shot volume | 20 cm³ |
| Pressure on material | 2500 bar |
| Opening of the press | 350 mm |
| Screw diameter | 18 mm |
|---|---|
| Tie bar spacing (V) | 270 mm |
| Shot weight | 17 g |
| Robot interface | |
| Mould size |
| Clamping force | 15 T |
|---|---|
| Tie bar spacing (H) | 170 mm |
| Shot weight | 24 g |
| Opening of the press | 200 mm |
| Screw diameter | 22 mm |
|---|---|
| Tie bar spacing (V) | 170 mm |
| Robot interface | |
| Mould size |
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot volume | 106 cm³ |
| Pressure on material | 1499 bar |
| Platen width | 545 mm |
| Number of cores | |
| Opening of the press | 500 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 370 mm |
| Shot weight | 89 g |
| Platen length | 545 mm |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size |
| Screw diameter | 22 mm |
|---|---|
| Tie bar spacing (V) | 170 mm |
| Robot interface | |
| Mould size |
| Tie bar spacing (H) | 170 mm |
|---|---|
| Shot weight | 24 g |
| Opening of the press | 200 mm |
South Korea
2010
| Clamping force | 160 T |
|---|---|
| Robot interface |
| Screw diameter | 40 mm |
|---|---|
| Mould size |
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 60 T |
|---|---|
| Tie bar spacing (H) | 320 mm |
| Shot volume | 121 cm³ |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 320 mm |
| Pressure on material | 1820 bar |
| Opening of the press | 350 mm |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Platen length | 400 mm |
| Robot interface | |
| Opening of the press | 325 mm |
| Screw diameter | 30 mm |
|---|---|
| Pressure on material | 1150 bar |
| Platen width | 400 mm |
| Number of heating zones | 4 |
| Mould size |
| Clamping force | 70 T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | 82 cm³ |
| Pressure on material | 2500 bar |
| Platen width | 915 mm |
| Number of cores | |
| Opening of the press | 250 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | 87 g |
| Platen length | 915 mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Shot volume | 20 cm³ |
| Pressure on material | 1290 bar |
| Platen width | 400 mm |
| Robot interface | |
| Opening of the press | 325 mm |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 221 mm |
| Shot weight | 51.1 g |
| Platen length | 400 mm |
| Equipped with robot | No |
| Number of heating zones | 4 |
| Mould size |
South Korea
2003
| Clamping force | 130 T |
|---|---|
| Robot interface |
| Screw diameter | 400 mm |
|---|---|
| Mould size |
Машина за леене под налягане Arburg 470 S 1300 -350
Vstřikolis Arburg 470 S 1300 -350
Arburg 470 S 1300 -350 Sprøjtestøbemaskine
Arburg 470 S 1300 -350 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Arburg 470 S 1300 -350
Arburg 470 S 1300 -350 Injection moulding machine
Inyectora de plástico Arburg 470 S 1300 -350
Presse à injecter Arburg 470 S 1300 -350
Stroj za injekcijsko prešanje Arburg 470 S 1300 -350
Arburg 470 S 1300 -350 Fröccsöntő gép
Pressa ad iniezione Arburg 470 S 1300 -350
Įpurškimo formavimo mašina Arburg 470 S 1300 -350
Arburg 470 S 1300 -350 Spuitgietmachine
Arburg 470 S 1300 -350
Máquina de injecção Arburg 470 S 1300 -350
Mașină de turnat prin injecție Arburg 470 S 1300 -350
Arburg 470 S 1300 -350 Термопластавтомат
Mašina za brizganje Arburg 470 S 1300 -350
Arburg 470 S 1300 -350 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Arburg 470 S 1300 -350
Romania
Italy
United Kingdom
Spain
Slovakia
EN
- Languages
English (GB)