Contact us to receive an offer.
| Manufacturer | Arburg |
|---|---|
| Model | 470 C 1500-800 |
| Year | 2006 |
| Location | France
|
This Arburg 470 C 1500-800 injection molding machine, manufactured in 2006 by ARBURG GmbH + Co KG in Germany, offers a clamping force of 150 tons and features a screw diameter of 50 mm. The machine has a platen size of 650 x 650 mm and tie bar spacing of 470 mm both horizontally and vertically. It provides a shot volume of 392 cm³ and a shot weight of 359 g, with a pressure on the material rated at 2000 bar. The opening of the press is 750 mm, and the machine weighs approximately 5150 kg, with overall dimensions of 4900 mm in length, 1595 mm in width, and 1950 mm in height. It is designed for processing materials such as PBT GF 30, ABS/PA, and PP.
This model is equipped with a control panel featuring a screen, multiple colored buttons, and an emergency stop button. The machine's housing is painted yellow and green, with a transparent protective window allowing visibility of internal components including hoses and piping. An orange ABB robotic arm is installed inside the machine, accompanied by a conveyor belt and a protective cage around the robotic arm and conveyor area, enhancing automation capabilities. The machine is installed in a factory setting with a clean floor, and the overall surface shows signs of use but no visible damage.
The centering ring diameter on the plate measures 160 mm, which differs from the standard 125 mm. The machine complies with CE norms and has undergone regular maintenance, including calibrations in May 2009 and May 2013, as well as a replacement of the CF card reader with a floppy disk drive in March 2015. Operating voltage is 400 V three-phase, with a control voltage of 230 V. Protective black metal mesh guarding is present around parts of the machine for safety. The control panel shows slight wear but remains intact, and the transparent window has some dust or dirt accumulation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Centering ring diameter on the plate is 160 mm (not the standard 125 mm)
This machine was regularly maintained and has CE norms.
Type of used material: PBT GF 30 *** ABS/PA *** PP
Service history:
3.2015 – Replacing the CF card reader with a floppy disk drive
5.2013 – Machine calibration
5.2009 – Machine calibration
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many operating hours does this Arburg 470 C 1500-800 have?
This Arburg 470 C 1500-800 injection moulding machine has 67,500 hours of operation.
What is the operating hour count for this Arburg 470 C 1500-800?
This Arburg 470 C 1500-800 injection moulding machine has 77,800 hours of operation.
What are the total operating hours for this Engel VC 1050/200 TECH?
This Engel VC 1050/200 TECH injection moulding machine has 104,900 hours of operation.
How many hours has this Demag 420/810-2300 NC4 operated?
This Demag 420/810-2300 NC4 injection moulding machine has 78,000 hours of operation.
What is the operating hour total for this Demag Ergotech 350/810-2300?
This Demag Ergotech 350/810-2300 injection moulding machine has 86,200 hours of operation.
Are there videos included with this equipment?
This equipment includes videos for some of the machines as part of the included equipment.
What was this equipment used to manufacture?
This equipment was used to manufacture fans for cars.
Why is the seller selling these machines?
The seller is parting with these machines because they have purchased new machines and need space.
When was this Arburg 470 C 1500-800 manufactured?
This Arburg 470 C 1500-800 injection molding machine was manufactured in 2006.
What is the clamping force of this machine?
This Arburg 470 C 1500-800 injection molding machine has a clamping force of 1500 kN.
What is the shot weight of this model?
This Arburg 470 C 1500-800 injection molding machine features a shot weight of 800 grams.
Is this machine operational and available for inspection?
This equipment is operational and can be inspected under power.
What year was this Arburg 470 C 1500-800 manufactured?
This Arburg 470 C 1500-800 injection molding machine was manufactured in 2006.
Is this equipment currently under power for inspection?
This equipment can be inspected under power.
When was this Arburg 470 C 1500-800 manufactured?
This Arburg 470 C 1500-800 injection moulding machine was manufactured in 2006.
Is this equipment currently under power?
This equipment can be inspected under power.
What type of machine is the Arburg 470 C 1500-800?
This Arburg 470 C 1500-800 is an injection moulding machine.
What year was this equipment manufactured?
This equipment was manufactured in the year 2006.
What category does this Arburg 470 C 1500-800 belong to?
This Arburg 470 C 1500-800 Injection moulding machine
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2022 |
| Offers online | 2 |
| Last activity | Oct. 13, 2026 |
Centering ring diameter on the plate is 160 mm (not the standard 125 mm)
This machine was regularly maintained and has CE norms.
Type of used material: PBT GF 30 *** ABS/PA *** PP
Service history:
3.2015 – Replacing the CF card reader with a floppy disk drive
5.2013 – Machine calibration
5.2009 – Machine calibration
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many operating hours does this Arburg 470 C 1500-800 have?
This Arburg 470 C 1500-800 injection moulding machine has 67,500 hours of operation.
What is the operating hour count for this Arburg 470 C 1500-800?
This Arburg 470 C 1500-800 injection moulding machine has 77,800 hours of operation.
What are the total operating hours for this Engel VC 1050/200 TECH?
This Engel VC 1050/200 TECH injection moulding machine has 104,900 hours of operation.
How many hours has this Demag 420/810-2300 NC4 operated?
This Demag 420/810-2300 NC4 injection moulding machine has 78,000 hours of operation.
What is the operating hour total for this Demag Ergotech 350/810-2300?
This Demag Ergotech 350/810-2300 injection moulding machine has 86,200 hours of operation.
Are there videos included with this equipment?
This equipment includes videos for some of the machines as part of the included equipment.
What was this equipment used to manufacture?
This equipment was used to manufacture fans for cars.
Why is the seller selling these machines?
The seller is parting with these machines because they have purchased new machines and need space.
When was this Arburg 470 C 1500-800 manufactured?
This Arburg 470 C 1500-800 injection molding machine was manufactured in 2006.
What is the clamping force of this machine?
This Arburg 470 C 1500-800 injection molding machine has a clamping force of 1500 kN.
What is the shot weight of this model?
This Arburg 470 C 1500-800 injection molding machine features a shot weight of 800 grams.
Is this machine operational and available for inspection?
This equipment is operational and can be inspected under power.
What year was this Arburg 470 C 1500-800 manufactured?
This Arburg 470 C 1500-800 injection molding machine was manufactured in 2006.
Is this equipment currently under power for inspection?
This equipment can be inspected under power.
When was this Arburg 470 C 1500-800 manufactured?
This Arburg 470 C 1500-800 injection moulding machine was manufactured in 2006.
Is this equipment currently under power?
This equipment can be inspected under power.
What type of machine is the Arburg 470 C 1500-800?
This Arburg 470 C 1500-800 is an injection moulding machine.
What year was this equipment manufactured?
This equipment was manufactured in the year 2006.
What category does this Arburg 470 C 1500-800 belong to?
This Arburg 470 C 1500-800 Injection moulding machine
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Arburg 470 C 1500-800 injection molding machine, manufactured in 2006 by ARBURG GmbH + Co KG in Germany, offers a clamping force of 150 tons and features a screw diameter of 50 mm. The machine has a platen size of 650 x 650 mm and tie bar spacing of 470 mm both horizontally and vertically. It provides a shot volume of 392 cm³ and a shot weight of 359 g, with a pressure on the material rated at 2000 bar. The opening of the press is 750 mm, and the machine weighs approximately 5150 kg, with overall dimensions of 4900 mm in length, 1595 mm in width, and 1950 mm in height. It is designed for processing materials such as PBT GF 30, ABS/PA, and PP.
This model is equipped with a control panel featuring a screen, multiple colored buttons, and an emergency stop button. The machine's housing is painted yellow and green, with a transparent protective window allowing visibility of internal components including hoses and piping. An orange ABB robotic arm is installed inside the machine, accompanied by a conveyor belt and a protective cage around the robotic arm and conveyor area, enhancing automation capabilities. The machine is installed in a factory setting with a clean floor, and the overall surface shows signs of use but no visible damage.
The centering ring diameter on the plate measures 160 mm, which differs from the standard 125 mm. The machine complies with CE norms and has undergone regular maintenance, including calibrations in May 2009 and May 2013, as well as a replacement of the CF card reader with a floppy disk drive in March 2015. Operating voltage is 400 V three-phase, with a control voltage of 230 V. Protective black metal mesh guarding is present around parts of the machine for safety. The control panel shows slight wear but remains intact, and the transparent window has some dust or dirt accumulation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2022 |
| Offers online | 2 |
| Last activity | Oct. 13, 2026 |
Шприцмашина Arburg 470 C 1500-800
Vstřikovací lis Arburg 470 C 1500-800
Arburg 470 C 1500-800 Sprøjtestøbemaskine
Arburg 470 C 1500-800 Spritzgießmaschine
Πρέσα έγχυσης Arburg 470 C 1500-800
Arburg 470 C 1500-800 Injection moulding machine
Inyectora Arburg 470 C 1500-800
Presse à injecter Arburg 470 C 1500-800
Stroj za injekcijsko prešanje Arburg 470 C 1500-800
Arburg 470 C 1500-800 Fröccsöntőgép
Pressa a iniezione Arburg 470 C 1500-800
Arburg 470 C 1500-800 Įpurškimo liejimo staklės
Arburg 470 C 1500-800 Spuitgietmachine
Wtryskarka Arburg 470 C 1500-800
Injetora Arburg 470 C 1500-800
Mașină de injectat Arburg 470 C 1500-800
Arburg 470 C 1500-800 Термопластавтомат
Mašina za injekciono prešanje Arburg 470 C 1500-800
Arburg 470 C 1500-800 Formsprutningsmaskin
Enjeksiyon makinesi Arburg 470 C 1500-800
EN
- Languages
English (GB)