OMIS SPA CARROPONTE Woodworking machine

Italy 2005

Bridge crane 6 ton capacity with guided load with log gripper, top control with cabin, hydraulic gripper, gauge 19500 mm

Price on request

View product

RUF 800 wood and biomass briquetting press – 2016, tested approximately 750 kg/h

Poland 2016

Industrial hydraulic RUF 800 briquetting press, manufactured in 2016, , right-hand version. Designed for compacting suitable dry sawdust, wood shavings and biomass into dense briquettes. Used for dry hardwood residues. Original machine documentation and performance test report are available. Technical data: • Nominal briquette format in machine documentation: 150 × 60 mm. • Electrical power: 43.5 kW. • Supply: 400 V AC, 50 Hz; rated current 84 A, mains protection 100 A. • Control voltage: 24 V. • Siemens S7-1200 control and TP700 operator panel. • Hydraulic oil: HLP 46, oil system capacity 600 litres. • Pressure valve setting: 315 bar. • Main cylinder pressure: 250 bar. • Pre-compaction pressure: 200 bar. • Dosing time: 0.6–2.5 seconds. • Machine cycle: approximately 4.7–4.8 seconds. Documented performance test, 25 June 2016: Dry beech and oak, particle size 0.01–3 mm, output approximately 750 kg/h and 750 briquettes/h, average briquette mass approximately 1 kg. Test briquettes approximately 85 mm long, cross-section recorded as 70 × 155 mm. Briquette quality rated good to very good. These are test results for that material, rather than a guaranteed output for all feedstocks. Process: dosing → pre-compaction → high-pressure hydraulic pressing → briquette discharge. The compact product is …

69,000 €

View product

2023 PROZAP EK0 Assembly line station

Germany 2023

Engine Power	15 kW
Capacity	kg/h

Type

Price on request

View product

Nail Making Machine WAFIOS/VITARI/MORONI

Croatia 1978

Nail Making Machine – WAFIOS/VITARI/MORONI Wire diameter - 1,2- 6,0 mm Nails lenght - 10 - 200 mm Capacity - 900 kg/h Plant consists of: 1. Wafios N3 2. Wafios S75 3. Wafios S110 4. Vitari V14R 5. Vitari V17R 6. Moroni SPN 200 7. Wafios Grinding machine MSD 500 8. Half automatic paking unit - 1-5 kg 9. Drum for cleaning and polishing nails - 2x400 kg/h

Price on request

View product

Used Casolin F90 Woodworking machine

Italy

Used Casolin F90 Woodworking machine Visible in Italy sold as it is

Price on request

View product

NARDI K200 – 4 timber drying kilns, 4 × 115 m³ – 2016

Poland 2016

Industrial timber drying installation comprising four independent NARDI K200 chambers, manufactured in 2016. Approximately 115 m³ of timber load per chamber, approximately 460 m³ total capacity. Independent chamber control and computerised process monitoring with NARDI LEONARDO. Technical data: • Internal dimensions of each chamber: approximately 10.8 × 8.9 × 4.1 m. • Maximum drying temperature: 75°C. • Heating medium: hot water, supply temperature 80°C. • Thermal demand for all four chambers: 401 kW. • Electrical demand per chamber: 33 kW; approximately 132 kW total. • Supply: 400 V, 50 Hz. • Six circulation fans per chamber, 24 fans in total. • Forced air circulation through timber stacks. • Hot-water heat exchangers. • Spray humidification with internal pipes and nozzles. • Controlled fresh-air supply and exhaust. • Heat recovery recuperator preheats incoming fresh air using energy from exhaust air. • Insulated industrial chambers with front loading. Designed for controlled industrial drying of sawn timber. Four independent chambers allow separate drying cycles. Due to language differences, we prefer written contact by email or WhatsApp.

200,000 €

View product

SYSTEM 3R Board separator Woodworking machine

Sweden

conveying machinery Board separator system. Length: 4240 mm, Width: 1800 mm, Hight: 200 mm.

Price on request

View product

Board separator - Woodworking machine

Sweden

Offer Title: Board Separator - Woodworking Machine Manufacturer: Board Separator Condition: Used Length: 4.8 m Width: 1.2 m Height: 0.55 m Technical Condition: As-is, where-is

Price on request

View product

Cursal flaw detection scanner

France

Offer title: Cursal flaw detection scanner Manufacturer: Cursal Model: Not specified Year of manufacture: Not specified Year of manufacture (approximate): Not specified Technical condition: As-is, where-is Description: This scanner can detect wood defects such as cracks, skipped knots, knots of different sizes, insect bites, warping, etc. Equipped with 8 cameras and lasers to detect lack of material.

Price on request

View product

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free

Sell your machine

or contact us

Overturning machine BIESSE RBO

Italy 1998

Through-overturner with crossed belts • Useful panel length (min – max): 270 – 3.000 mm • Useful panel width (min – max): 220 – 670 mm • Useful panel thickness (min – max): 10 mm – 50 mm • Copy of original EC Declaration of Conformity this extra information is standard for this model. Please always double-check the details during a visit The BIESSE RBO Overturning Machine, dating back to 1998, remains a trusted workhorse in the woodworking industry. Despite its age, this specific model continues to be recognized for its reliability and efficiency, serving as an integral part of various woodworking operations. Key features of the BIESSE RBO Overturning Machine include its ability to handle and manipulate large wooden panels with precision. It is designed to facilitate the flipping and positioning of panels during the production process, optimizing workflow and reducing manual labor. One of the standout features of this machine is its rugged construction and robust components, which contribute to its longevity and dependable performance. Even after years of use, the BIESSE RBO Overturning Machine continues to provide consistent and reliable service, making it a cost-effective choice for woodworking facilities. The BIESSE RBO Overturning Machine is known for …

Price on request

View product

Baljer & Zembrod Trolley Vehicle for handling, sorting, transporting and cutting round wood

Poland

- German production - measurement of wood length - automatic cutting cycle TECHNICAL PARAMETERS: - maximum log diameter 1000 mm - maximum crane reach 9200 mm - crane operating angle 225" - 360" rotatable head - lifting capacity: 2000 mm - 2560 kg 7240 mm - 1680 kg 9200 mm - 1330 kg - dumper dimensions 6000x2150 mm - dumper with double-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic guide stroke - manual and automatic operation mode - log lifting - integrated sawdust extraction 2.2 kW - cable winding drum Transport dimensions 12.5 x 2.4 x 2.4 m weight 12,000 kg

Price on request

View product

Wire nail making machine Wafios N75

Croatia 1979

Wire nail making machine Make: Wafios Type: N75 Constr. year: 1979 diameter range: 2,0-3,8 mm nail length: 20-80 mm output – pieces/min: 440

Price on request

View product

Imatec IF45 Double automatic chevron header profiling machine

Italy

DOUBLE AUTOMATIC CHEVRON PROFILING CUTTER MOD. IF45 Automatic header machine for production of CHEVRON PARQUET at various gradations. Machine with 2+2 motors. PRODUCTION: 1 piece every 4 / 5 seconds with 1 operator. TECHNICAL FEATURES: Width min / max mm 50 / 150 Working length min / max mm 220 / 1200 Working thickness min / max mm 6 / 50 Feed speed min / max mt/min 4-24 1+1 Motor group Automatic header KW 2 - rpm 3000/7000 1+1 Motor unit Automatic milling machine KW 4 - rpm 3000/7000 Fully electronic machine

Price on request

View product

BIESSE OMNIA SB Woodworking machine

Italy 2008

Offer title: BIESSE OMNIA SB Manufacturer: BIESSE Model: OMNIA SB Year of manufacture: 2008 Technical condition: as seen, whereabouts

Price on request

View product

BIESSE COMIL CF 2000 Woodworking machine

Italy 2000

BIESSE COMIL CF 2000 pneumatic clamp Year 2000 Location Italy

Price on request

View product

Felder K700 S Woodworking machine

Poland

Engine Power	5.5 kW

8,970 €

View product

Imatec ISF45 Double automatic chevron header profiling machine

Italy

DOUBLE AUTOMATIC CHEVRON PROFILING CUTTER MOD. ISF45 Automatic header machine for production of CHEVRON PARQUET at various gradations. PRODUCTION: 1 piece every 8/10 seconds with 1 operator. AUTOMATIC DOUBLE PROFILING HEADER MACHINE FOR CHEVRON MOD. ISF45 Machine 2+2 motors 1+1 automatic header group 1+1 group Automatic milling machine Working width min / max mm 50/150 Working length min / max mm 100/1200 Working thickness min / max mm 6/50

Price on request

View product

Reiter & Crippa FRN 1100 Woodworking machine

Italy 1995

Reiter & Crippa Vimercate jaw crusher FRN 1100 - Mouth mm. 1,200 x 920 - Complete with electric motor - Including new spare parts: bearings, discs, etc. --- Available Reiter & Crippa plate feeder type RRL 1000 x 4000

Price on request

View product

BRUKS 1500 M – complete wood chip and biomass production line, 90 kW

Poland

Complete industrial line for automatic feeding and chipping wood residues into wood chips for biomass and other applications. Main machine: BRUKS 1500 M industrial disc chipper with AEG 90 kW main motor, belt transmission, nominal motor speed 985 rpm, 380 V, 50 Hz. Included equipment: • Horizontal loading buffer: 13,000 × 2600 × 800 mm, four chain tracks, 1.5 kW motor, suitable for loose or bundled material. • Inclined chain feeder with flights: 3200 × 2600 × 2300 mm, 1.5 kW motor, forward/reverse operation. • Original BRUKS Carrier III M 450 vibrating conveyor, : 14.5 m length, 640 mm internal trough width, 240 mm depth, 3.3 kW motor; mechanical eccentric vibration system. • Powered feed rollers directly before the chipper, 2.2 kW. • BRUKS 1500 M chipper; approximate unit dimensions 2500 × 3000 × 2600 mm. Chip outlet lower edge approximately 1000 mm above floor level. • Modular sound-insulating enclosure around chipper and drive: approximately 6 × 6 × 6 m externally, mineral wool insulation, approximately 500 mm wall thickness. Can be dismantled into modules for transport and reassembled. • Chip discharge belt conveyor: 15,000 × 800 × 600 mm, 5.5 kW motor. • Operator station, local control panel and …

39,900 €

View product

Hydraulic station -- Woodworking machine

Sweden

other woodworking machinery hydraulic station Hydraulic station is in working condition. Electric Motor: 5,5 kW

Price on request

View product

Used Miscellaneous wood machinery for sale

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free