Contact us to receive an offer.
| Manufacturer | Stilmas |
|---|---|
| Model | PHARMASTILL MS 205S |
| Year | 1987 |
| Location | Italy
|
The Stilmas PHARMASTILL MS 205S is a multiple effect distiller designed for producing distilled water suitable for injectable use, compliant with international pharmacopeia standards including USP, EP, and JP. Manufactured in 1987, this equipment features a modular construction that allows for various configurations to optimize payback times and operational flexibility. It is suitable for industries such as pharmaceutical, chemical, cosmetics, food, dietary, and medical devices.
The distillation process begins with water being warmed in the generator by a heat exchanger. In the first column, the water is further heated by industrial steam, causing partial evaporation and initiating the multiple effect distillation cycle. The steam and remaining water proceed through successive columns where the process repeats at higher temperatures and pressures. The distilled product is collected via condensation and passes through a preheater. This cycle continues through all columns, with the steam produced in the last effect being condensed and cooled.
Key features include rapid startup with distillate production occurring within minutes of switch-on, energy efficiency achieved through a carefully designed condenser/evaporator system and heat recovery, and high production capacity flexibility allowing variation up to 80% without plant modifications. The system employs a gravitational purification principle to ensure high distillate purity, complemented by a simple, sanitary mechanical design that requires limited maintenance. The construction is compact and lightweight relative to its output capacity.
Technical specifications include an operating pressure of 8-10 bar (8 Kg/cm²), temperatures ranging from 175 to 184°C, and a tubes capacity of 22 liters.
The machine is mounted on a large metal frame housing multiple vertical cylindrical columns interconnected by pipes. It includes an electric motor attached to a vertical pump component and a control panel equipped with multiple buttons, switches, meters, and a labeled diagram. The equipment shows signs of use with some minor surface rust visible on the base frame but appears to be in overall good condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
DESCRIPTION:
Multiple effect distiller equipment. The Pharmastill multiple effect Stills produce distilled water for injectable use which meets the requirements of the International Pharmacopeias including USP, EP and JP. A complete system of sanitary heat exchanger for energy recovery and a very accurate and optimized design grant the best performance in terms of energy/cold water consumption, compared to any other similar system. The Pharmastill modular construction offers a wide choice of configurations allowing optimum payback times. Standard models range is from 60 to 22.000 lts/h output.
SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices.
MAIN FEATURES:
The water introduced in the generator gets warmed by the heat exchanger. In the first coloumn, further heated by the industrial steam, it gets partially evaporated, this is the beginning of the multiple effect distillation process. The steam and the water non-evaporated follow their way to the next effect where the process is repeated at a higher temperature and pressure. The product distilled by the condensation of the pure vapor passes to the preheater. The same cycle is repeated in every coloumn. The steam which is produced during the last effect becomes condensed and cooled down. Rapid start up. The distillate is produced after only few minutes from switch on. Energy Saving: the best performances in terms of energy saving, thanks to an extremely accurate design of the condenser/evaporators and heat recovery system. High Flexibility: the production capacity can be varied by up to 80% without any plant modification. Unique purification system: gravitational purification principle for better guarantee of distillate purity. Simple and clean mechanical construction. Extremely limited maintenance. Compact construction and low weight.
Year: 1987
TECHNICAL DATA
Pressure bar 8-10
Working pressure Kg/cm2 8
Temperature °C 175-184
Tubes capacity L 22
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the production rate of this STILMAS PHARMASTILL MS 205S?
This STILMAS PHARMASTILL MS 205S water distiller produces distilled water at a rate of approximately 240 to 420 liters per hour, depending on the steam heating pressure.
When was this STILMAS PHARMASTILL MS 205S manufactured?
This STILMAS PHARMASTILL MS 205S was manufactured in 1987.
What is the serial number of this equipment?
This equipment has a serial number of 3858.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 1275 |
| Last activity | Oct. 26, 2026 |
DESCRIPTION:
Multiple effect distiller equipment. The Pharmastill multiple effect Stills produce distilled water for injectable use which meets the requirements of the International Pharmacopeias including USP, EP and JP. A complete system of sanitary heat exchanger for energy recovery and a very accurate and optimized design grant the best performance in terms of energy/cold water consumption, compared to any other similar system. The Pharmastill modular construction offers a wide choice of configurations allowing optimum payback times. Standard models range is from 60 to 22.000 lts/h output.
SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices.
MAIN FEATURES:
The water introduced in the generator gets warmed by the heat exchanger. In the first coloumn, further heated by the industrial steam, it gets partially evaporated, this is the beginning of the multiple effect distillation process. The steam and the water non-evaporated follow their way to the next effect where the process is repeated at a higher temperature and pressure. The product distilled by the condensation of the pure vapor passes to the preheater. The same cycle is repeated in every coloumn. The steam which is produced during the last effect becomes condensed and cooled down. Rapid start up. The distillate is produced after only few minutes from switch on. Energy Saving: the best performances in terms of energy saving, thanks to an extremely accurate design of the condenser/evaporators and heat recovery system. High Flexibility: the production capacity can be varied by up to 80% without any plant modification. Unique purification system: gravitational purification principle for better guarantee of distillate purity. Simple and clean mechanical construction. Extremely limited maintenance. Compact construction and low weight.
Year: 1987
TECHNICAL DATA
Pressure bar 8-10
Working pressure Kg/cm2 8
Temperature °C 175-184
Tubes capacity L 22
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the production rate of this STILMAS PHARMASTILL MS 205S?
This STILMAS PHARMASTILL MS 205S water distiller produces distilled water at a rate of approximately 240 to 420 liters per hour, depending on the steam heating pressure.
When was this STILMAS PHARMASTILL MS 205S manufactured?
This STILMAS PHARMASTILL MS 205S was manufactured in 1987.
What is the serial number of this equipment?
This equipment has a serial number of 3858.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Stilmas PHARMASTILL MS 205S is a multiple effect distiller designed for producing distilled water suitable for injectable use, compliant with international pharmacopeia standards including USP, EP, and JP. Manufactured in 1987, this equipment features a modular construction that allows for various configurations to optimize payback times and operational flexibility. It is suitable for industries such as pharmaceutical, chemical, cosmetics, food, dietary, and medical devices.
The distillation process begins with water being warmed in the generator by a heat exchanger. In the first column, the water is further heated by industrial steam, causing partial evaporation and initiating the multiple effect distillation cycle. The steam and remaining water proceed through successive columns where the process repeats at higher temperatures and pressures. The distilled product is collected via condensation and passes through a preheater. This cycle continues through all columns, with the steam produced in the last effect being condensed and cooled.
Key features include rapid startup with distillate production occurring within minutes of switch-on, energy efficiency achieved through a carefully designed condenser/evaporator system and heat recovery, and high production capacity flexibility allowing variation up to 80% without plant modifications. The system employs a gravitational purification principle to ensure high distillate purity, complemented by a simple, sanitary mechanical design that requires limited maintenance. The construction is compact and lightweight relative to its output capacity.
Technical specifications include an operating pressure of 8-10 bar (8 Kg/cm²), temperatures ranging from 175 to 184°C, and a tubes capacity of 22 liters.
The machine is mounted on a large metal frame housing multiple vertical cylindrical columns interconnected by pipes. It includes an electric motor attached to a vertical pump component and a control panel equipped with multiple buttons, switches, meters, and a labeled diagram. The equipment shows signs of use with some minor surface rust visible on the base frame but appears to be in overall good condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 1275 |
| Last activity | Oct. 26, 2026 |
Stilmas PHARMASTILL MS 205S
Mycí a sterilizace stroj Stilmas PHARMASTILL MS 205S
Stilmas PHARMASTILL MS 205S
Stilmas PHARMASTILL MS 205S Reinigung- und Sterilisierungsmaschine
Stilmas PHARMASTILL MS 205S
STILMAS mod. PHARMASTILL MS 205S - Water distiller used
Máquina de limpieza y esterilización Stilmas PHARMASTILL MS 205S
Machine de nettoyage - stérilisation Stilmas PHARMASTILL MS 205S
Stilmas PHARMASTILL MS 205S
Stilmas PHARMASTILL MS 205S
STILMAS mod. PHARMASTILL MS 205S - Generatore acqua distillata usato
Stilmas PHARMASTILL MS 205S
Stilmas PHARMASTILL MS 205S
Maszyna czyszczaca / myjnia Stilmas PHARMASTILL MS 205S
Stilmas PHARMASTILL MS 205S
Stilmas PHARMASTILL MS 205S
Stilmas PHARMASTILL MS 205S Чистящее и стерилизующее оборудование
Stilmas PHARMASTILL MS 205S
Stilmas PHARMASTILL MS 205S
Temizlik ve sterilizasyon makinesi Stilmas PHARMASTILL MS 205S
EN
- Languages
English (GB)