NDL Craft 10 HL

Manufacturer	NDL Craft
Model	10 HL
Category	Wine, beer or alcohol making machines

NITROCRAFT TERA S010 nitrogen generator

France 2025

2025 NITROCRAFT TERA S010 nitrogen generator New. Never installed. Nitrogen (N₂) Purity Available Flow Rate (m³/h) 99.0% 16.9 m³/h 99.5% 13.8 m³/h 99.9% 6.8 m³/h 99.95% 5.4 m³/h Dimensions (H x W x D): 1290 x 450 x 580 mm Empty weight: 160 kgMaximum outlet pressure: 12 bar.g Power supply: 230 V / 50 Hz Power consumption: Only 100 W Fluid connections: 3/4" compressed air inlet / 1/2" nitrogen outlet Protection rating: IP55

7,000 €

View product

Spadoni MBS600 beer brewing room

France 2022

Type	Beer

20,000 €

View product

CIMEC MO LD 9/8/1C beer bottling machine from 2018 + ENOS labeling machine

France 2019

Type	Beer

14,000 €

View product

Speidel Braumeister 500L compact single-vessel electric brewhouse

France 2021

Type	Beer

Price on request

View product

BrauKon 10HL ISO Fermentation and storage cellar

France 2018

Type	Beer

Price on request

View product

10 HL Brewing Room with Steam Heater, 2020

France 2020

Type	Beer

24,000 €

View product

3,000 L stainless steel filtration/fermentation tank Hot deal Low working hours

France 2022

Type	Beer

29,500 € Price is negotiable

View product

Press - PN50 - PERA - 50 HL

France 2000

Type	Wine

36,000 €

View product

Barrel Washer and Filler, Dual-Station Machine - Model CFA2-32S-T-H-1 - Manufactured in August 2022

France 2022

Type: Semi-automatic, dual-station drum washer and filler Model: CFA2-32S-T-H-1 Year of manufacture: 2022 Configuration: One washing station and one filling station Controls: Siemens touchscreen with separate controls for washing and filling Condition: Equipment visible on-site and shown in the photographs Location: Basque Country Power supply: Three-phase 400 V, 50 Hz Total power: 3 kW Compressed air pressure: 0.55 to 0.80 MPa CO2 pressure: 0.30 to 0.40 MPa Net weight: 300 kg Dimensions: 1550 x 1700 x 2170 mm Country of Manufacture: China Marking: CE Approximate Output: 25 to 30 drums per hour (for 20-liter drums) Drum Diameter: 250 to 450 mm Drum height: 350 to 620 mm Air supply pressure: 0.55 to 0.80 MPa Cylinder pressure: 0.55 to 0.65 MPa Steam pressure: 0.20 to 0.30 MPa Beer pressure: 0.10 to 0.20 MPa Hot water or soda solution temperature: 40 to 80 °C Specified soda concentration: 1 to 2% Beer connection: 1.5-inch Tri-Clamp Steam connection: DN25 Water and drain connections: 1.5-inch Tri-Clamp Main functions described in the manual: pneumatic clamping of the inverted keg onto the processing head; air purge; water rinse; washing with alkaline solution and return of the solution to the tank; hot water rinse and return of water …

Price on request

View product

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free

Sell your machine

or contact us

DELLA TOFFOLA 600 x 600 Wine, beer or alcohol making machine

France 2006

Type	Wine

Price on request

View product

DELLA TOFFOLA CFKB 50/50 tangential (crossflow) beer filter

France 2020

Type	Beer

44,000 € Price is negotiable

View product

Shandong Yuesheng 10HL Brewhouse

France 2020

Type	Beer

Price on request

View product

Müller 226 L Professional Still – Rectification Column / aRoMat

France 2021

For sale: Müller GmbH AROMA IV professional still, purchased new and installed in 2021. Complete professional setup designed for distilling spirits. This still is equipped with a rectification column, the patented aRoMat system, an aroma basket, and a CIP cleaning system. Heating is provided by a water bath with a 30 kW three-phase electric heater. The system also features an electric agitator with adjustable speed and a condenser/cooler with adjustable cooling water flow. Key Features: - Brand: Müller Brennereianlagen - Model: AROMA IV - Filling capacity: 226 liters - Still Ø 750 mm - Hammered copper, 3 mm thick - Electric heating: 30 kW - Water-bath heating - Insulated stainless steel water-bath jacket - Electric agitator with adjustable speed - Rectification column Ø 400 mm - 2 rectification trays - Patented aRoMat system Ø 400 mm - Deflagrator - Condenser/cooler with water control - Aromatic basket (Ø 300 mm) for herbs, fruits, and botanicals - Viewports with LED lighting - CIP cleaning system with spray balls - Digital temperature control and display - Distillate tank: 300 L - Hot water tank: 125 L - Pumps and associated equipment The unit is particularly well-suited for the production of gin, whiskey, brandies, …

58,000 € Price is negotiable

View product

Thermindus GV INSIEME Steam Generator (2016)

France 2016

Type	Beer

Price on request

View product

Mueller 20HL Brewery

France 1982

Type	Beer

Price on request

View product

Simatec - 10 hl beer production plant

Italy 2008

Type	Beer

Price on request

View product

Speidel Braumeister 500 Wine, beer or alcohol making machine

France 2021

BRAUMEISTER 500L (2021 model) Complete beer brewing system - WITH TOUCHSCREEN. - Programmable for overnight heating - Made of AISI 304L stainless steel with 3D interior finish. - Automatic electronic control (temperature, time, pump).. - Manual winch TECHNICAL SPECIFICATIONS ,. Finished beer volume: approx. 500 liters - approx. 550 liters of beer wort. - Double-walled 1.8 m²: cooling - (Whirlpool) - Stainless steel ball valve, 1" female inlet / - 1" male outlet. - Pump power: 370 W; heating: 6 x 3000 W. - 400 V power connection.

Price on request

View product

BRESSANE DE CHAUDRONNERIE GÉNÉRALE Cuve inox 304 fond plat - Cuve alimentair de stockage Wine, beer or alcohol making machine

France 2007

Type	Wine

Price on request

View product

NDL Craft 5 HL Brewing Kit

France 2023

Subject: NDL Craft 5 HL Brewing System Equipment Type: Brewhouse / 5 HL Brewpub System Brand: NDL Craft Model: 5 HL Year visible on manufacturer’s plates: 2023 Main capacity: 5 HL brewing Technical tank capacity: 15 HL (as indicated on manufacturer’s plates) Condition: Equipment installed, viewable on-site; photo gallery available Location: Basque Country—Bayonne, Hasparren, and Anglet areas Terms of sale: Price and terms of sale to be determined after initial contact Lot composition: 15 HL hot water tank; 15 HL cold water tank; Cooling system; Plate heat exchanger; 1 tier; Electric steam generator; Control system; 2 x 5 HL fermenters; Heat exchanger flow meter; Installation piping; Small bottling machine (to be discussed separately) Items not included: Malt mill; Installation and commissioning; Stainless steel kegs Visible technical specifications: Hot water tank – 16 HL gross / 15 HL net; SUS 304; 80 mm aluminum silicate insulation; Cold water tank – 16 HL gross / 15 HL net; SUS 304; 80 mm polyurethane insulation; Glycol water tank – 11.3 HL gross / 10 HL net; SUS 304; 80 mm polyurethane insulation Note: These specifications are based solely on the information legible on the nameplates and in the provided documentation; to be confirmed …

Price on request

View product

DELLA TOFFOLA PPD 60 Wine, beer or alcohol making machine

France 2009

Type	Wine

3,000 €

View product

Pera PE 35 Wine, beer or alcohol making machine

France 2014

Type	Wine

Price on request

View product

Closed stainless steel tank - Conical bottom on feet - CTM - 11000 L

France 2000

Type	Wine

7,900 €

View product

ENOS Euro Wine, beer or alcohol making machine

France 2020

Enos Euro bottle labeler from 2020. Excellent condition for roll adhesive labels. Machine used upstream of a bottling machine (no accumulation table at the output) for bottles of various sizes. Dimensions: Length: 202.5 cm / Width: 104 cm / Height: 174 cm Weight: 200 kg Output: 1800 labels per hour Power supply: Three-phase, 380V (16A plug) Compressed air supply: 6 bar Simple manual adjustments: Manually adjustable height to accommodate different bottle heights. Manually adjustable rail and roller width to accommodate different bottle diameters. Inkjet printer for printing the date, batch number, and alcohol percentage… Conveyor at the infeed for easy bottle feeding (length: 110cm, width: 45cm, adjustable height), powered by three-phase electricity. Photos, user manual, and video available upon request.

5,000 €

View product

CCT 26 HL Conical-Bottom Fermenter on 4 Adjustable Legs

France 2017

Type	Beer

9,000 €

View product

DELLA TOFFOLA PE 16 Open-Cage Pneumatic Membrane Press

France 2024

Type	Wine

23,500 €

View product

Pneumatic press Model PE 35

France 2022

Pneumatic press Model PE 35 exhibition Open cage with manual loading door 510 X 592 Counter door for inspection and washing Equipment on wheels French maie Fully overhauled

29,500 €

View product

Hermex Cuve fibre de verre fond plat - Cuve alimentaire de stockage - 007811 Food processing machine

France 1994

Availability: 8 units Type: Vertical storage tank Brand: Hermex Model: Hermex vertical fiberglass storage tank, flat bottom Year of manufacture: 1994 Capacity: 53,000 litres Material: Fibre-reinforced fiberglass Configuration: Vertical cylindrical tank Top features: Central chimney with stainless steel hatch Access: Oval autoclave door Sampling valve: Included sampling valve Rising tube: External rising tube Drainage: Total drainage port on flange Mounting: Mounted on masonry support Bottom: Flat bottom Applications: Storage of wine, must, juice, food-grade liquids, and agricultural liquids Suitable for: Winery, cellar or production unit Dimensions: Diameter 2,500 mm; Height 12,000 mm Compliance: CE compliant Warranty: 6 months

Price on request

View product

TEC Cuve inox 304 fond plat - Cuve alimentaire de stockage - 007814 Wine, beer or alcohol making machine

France 2000

Type: Vertical storage tank Brand: TEC Model: Cuve inox 304 fond plat - Cuve alimentaire de stockage Year of manufacture: 2000 Capacity: 150,000 L (150 m3) Material: 304 stainless steel Applications: Wine storage; must storage; juice storage; food liquid storage; winemaking; wine applications; cider applications; food processing applications; use in cellars, wineries, or production facilities Dispensing circuits: 2 Roof: Centered chimney with stainless steel hatch; 4 lifting rings Bottom: Flat bottom with drain plug; stainless steel total drain valve on drain plug SIRL: Oval autoclave door; Sampling tap; Pumping tube; Stainless steel partial drain valve Dimensions: Diameter: 4,400 mm; Overall height: 10,500 mm Condition: Used - as-is, where-is Annexes: 6-month warranty; CE compliant

Price on request

View product

GEA WESTFALIA SC70 CENTRIFUGE

France 1996

GEA WESTFALIA SC70 CENTRIFUGE Equipment in excellent condition. Reconditioned mechanics and electricity. Ready to operate. Provide a foundation framework. Equipment available on site in the south of France.

Price on request

View product

GEA WESTFALIA SA100 CENTRIFUGE

France 2021

GEA WESTFALIA SA100 Equipment in very good condition, immediately functional, reconditioned. Mechanical and electrical. Available in France.

105,000 €

View product

Details - NDL Craft 10 HL

Specifications

Type	Beer
-------------------
Length x width x height	nan × nan × nan
Weight	nan kg

Why buyers buy with us

Verified sellers

We verify sellers and confirm key machine information before introducing buyers and sellers

Secure transactions

We help secure international transactions and assist both parties until the deal is completed

Worldwide logistics support

From loading to international transport, we help coordinate the logistics through our trusted partners

Dedicated experts

A machinery sales specialist manages your request from the first message to the completed purchase

NDL Craft 10 HL

Here is a selection of similar machines - NDL CRAFT 10 HL

Specifications

Similar machines sold on our website

Are you looking for this machine?