Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
France
1999
| Clamping force | 550 T |
|---|---|
| Tie bar spacing (H) | 930 mm |
| Shot volume | 2128 cm³ |
| Platen length | 1350 mm |
| Bi-metal screw | Yes |
| Robot interface | oui |
| Number of heating zones | 24 |
| Mould size |
| Screw diameter | 85 mm |
|---|---|
| Tie bar spacing (V) | 930 mm |
| Pressure on material | 1418 bar |
| Platen width | 1350 mm |
| Equipped with robot | Yes |
| Number of cores | 3 |
| Opening of the press | 1100 mm |
| Clamping force | 320 T |
|---|---|
| Tie bar spacing (H) | 735 mm |
| Shot volume | 1259 cm³ |
| Platen length | 1045 mm |
| Robot interface |
| Screw diameter | 75 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 1600 bar |
| Platen width | 1045 mm |
| Mould size |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 445 mm |
| Shot volume | 220 cm³ |
| Platen length | 630 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 445 mm |
| Pressure on material | 2030 bar |
| Platen width | 630 mm |
| Opening of the press | 175 mm |
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 735 mm |
| Shot volume | 140 cm³ |
| Platen length | 1045 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 32 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 2300 bar |
| Platen width | 1045 mm |
| Opening of the press | 660 mm |
| Clamping force | 800 T |
|---|---|
| Tie bar spacing (H) | 1100 mm |
| Shot volume | 1988 cm³ |
| Platen length | 1570 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 1200 mm |
| Screw diameter | 75 mm |
|---|---|
| Tie bar spacing (V) | 1100 mm |
| Pressure on material | 2121 bar |
| Platen width | 1570 mm |
| Robot interface | E67 |
| Number of heating zones | 16 |
| Mould size | 450-1200 |
France
2007
| Clamping force | 430 T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | 1656 cm³ |
| Platen length | 1180 mm |
| Robot interface | OUI |
| Opening of the press | 950 mm |
| Screw diameter | 75 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Pressure on material | 2120 bar |
| Platen width | 1180 mm |
| Number of cores | 3 |
| Mould size |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 445 mm |
| Shot volume | 220 cm³ |
| Robot interface | |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 445 mm |
| Pressure on material | 2030 bar |
| Opening of the press | 175 mm |
| Clamping force | 400 T |
|---|---|
| Tie bar spacing (H) | 780 mm |
| Shot volume | 1259 cm³ |
| Platen length | 1140 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 75 mm |
|---|---|
| Tie bar spacing (V) | 780 mm |
| Pressure on material | 1580 bar |
| Platen width | 1140 mm |
| Opening of the press | 750 mm |
| Clamping force | 750 T |
|---|---|
| Tie bar spacing (H) | 1100 mm |
| Shot volume | 4546 cm³ |
| Platen length | 1570 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 105 mm |
|---|---|
| Tie bar spacing (V) | 1100 mm |
| Pressure on material | 1510 bar |
| Platen width | 1570 mm |
| Opening of the press | 1200 mm |
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 445 mm |
| Shot volume | 55 cm³ |
| Platen length | 630 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 22 mm |
|---|---|
| Tie bar spacing (V) | 445 mm |
| Pressure on material | 2400 bar |
| Platen width | 630 mm |
| Opening of the press | 380 mm |
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 610 mm |
| Shot volume | 342 cm³ |
| Platen length | 870 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 610 mm |
| Pressure on material | 2245 bar |
| Platen width | 870 mm |
| Opening of the press | 560 mm |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 350 mm |
| Shot volume | 39 cm³ |
| Pressure on material | 2040 bar |
| Platen width | 440 mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | 250 mm |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 300 mm |
| Shot weight | g |
| Platen length | 490 mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 320 T |
|---|---|
| Tie bar spacing (H) | 735 mm |
| Shot volume | 163 cm³ |
| Platen length | 1045 mm |
| Bi-metal screw | Yes |
| Opening of the press | 660 mm |
| Screw diameter | 38 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 1564 bar |
| Platen width | 1045 mm |
| Robot interface | |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 610 mm |
| Shot volume | 278 cm³ |
| Equipped with robot | Yes |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 610 mm |
| Pressure on material | 1659 bar |
| Robot interface | Yes |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 300 mm |
| Shot volume | 39 cm³ |
| Platen length | 490 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 350 mm |
| Pressure on material | 2040 bar |
| Platen width | 440 mm |
| Opening of the press | 250 mm |
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 300 mm |
| Shot volume | 39 cm³ |
| Platen length | 440 mm |
| Robot interface | |
| Opening of the press | 250 mm |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 350 mm |
| Pressure on material | 2040 bar |
| Platen width | 490 mm |
| Number of cores | 4 |
| Mould size |
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 460 mm |
| Shot volume | 361 cm³ |
| Platen length | 660 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 460 mm |
| Pressure on material | 1296 bar |
| Platen width | 620 mm |
| Opening of the press | 330 mm |
| Clamping force | 65 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 168 cm³ |
| Robot interface |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 460 mm |
| Pressure on material | 2025 bar |
| Mould size |
| Clamping force | 250 T |
|---|---|
| Robot interface |
| Screw diameter | 38 mm |
|---|---|
| Mould size |
| Clamping force | 320 T |
|---|---|
| Mould size |
| Robot interface |
|---|
France
1983
| Clamping force | 900 T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | 164 cm³ |
| Pressure on material | 1523 bar |
| Platen width | mm |
| Number of cores | |
| Opening of the press | 500 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | g |
| Platen length | mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 100 T |
|---|---|
| Tie bar spacing (H) | 445 mm |
| Shot volume | 139 cm³ |
| Platen length | 630 mm |
| Robot interface |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 445 mm |
| Pressure on material | 1843 bar |
| Platen width | 630 mm |
| Mould size |
| Clamping force | 140 T |
|---|---|
| Mould size |
| Robot interface |
|---|
| Screw diameter | 75 mm |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 750 T |
|---|---|
| Mould size |
| Robot interface |
|---|
| Clamping force | 65 T |
|---|---|
| Robot interface |
| Screw diameter | 35 mm |
|---|---|
| Mould size |
| Clamping force | 430 T |
| Screw diameter | 80 mm |
| Tie bar spacing (H) | 820 mm |
| Tie bar spacing (V) | 820 mm |
| Shot volume | 1433 cm³ |
| Shot weight | g |
| Pressure on material | 1395 bar |
| Platen length | 1180 mm |
| Platen width | 1180 mm |
| Bi-metal screw | Yes |
| Equipped with robot | No |
| Robot interface | OUI |
| Number of cores | 2 |
| Number of heating zones | 8 |
| Opening of the press | 950 mm |
| ------------------- | |
| Length x width x height | 9000.0 × 2200.0 × 2500.0 |
| Weight | 26000 kg |
France
1998
| Clamping force | 430 T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | 1885 cm³ |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Pressure on material | 1860 bar |
| length | 9300 mm |
|---|---|
| height | 2700 mm |
| Clamping force | 430 T |
| Tie bar spacing (H) | 820 mm |
| Shot volume | 1864 cm³ |
| Platen length | 1180 mm |
| Bi-metal screw | Yes |
| Number of cores | 2 |
| width | 2200 mm |
|---|---|
| weight | 26400 kg |
| Screw diameter | 80 mm |
| Tie bar spacing (V) | 820 mm |
| Pressure on material | 1864 bar |
| Platen width | 1180 mm |
| Robot interface | OUI |
| Number of heating zones | 8 |
| Clamping force | 430 T |
|---|---|
| Tie bar spacing (H) | 820 mm |
| Shot volume | 1657 cm³ |
| Bi-metal screw | No |
| Robot interface | OUI |
| Opening of the press | 950 mm |
| Screw diameter | 75 mm |
|---|---|
| Tie bar spacing (V) | 820 mm |
| Pressure on material | 2121 bar |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size |
Romania
EN
- Languages
English (GB)
English (US)
Français
Čeština
Español
Deutsch
Italiano
Polski
Русский
Türkçe
Português
Magyar
Hrvatski
Български
Nederlands
Ελληνικά
Dansk
Svenska
Română
Crpski
Lietuvių