Contact us to receive an offer.
| Manufacturer | SCHAUBLIN |
|---|---|
| Model | 180 CCN R-T |
| Year | 2002 |
| Location | Switzerland
|
The SCHAUBLIN 180 CCN R-T is a CNC lathe designed for precision turning operations, manufactured in 2002. It features a robust construction with overall dimensions of 2301 mm in length, 1460 mm in width, and 1676 mm in height, and weighs approximately 2460 kg.
This lathe offers a maximum turning length of 630 mm and a distance between centers of 600 mm. It has a center height of 275 mm and a swing over the bed of 600 mm, with a swing over the cross-slide of 150 mm. The spindle bore diameter is 60 mm, accommodating bar stock passage of the same size. The carriage provides a longitudinal travel (Z-axis) of 672 mm and a transversal stroke (X-axis) of 230 mm.
Equipped with a single turret, the machine supports 8 tool positions, allowing versatile tooling options. The spindle motor delivers 18.5 kW of power with speeds steplessly adjustable up to 4000 rpm, suitable for various machining requirements. The control panel is a GE Fanuc Series 18i-T, featuring a display screen and an alphanumeric keypad with function keys, enabling comprehensive machine operation and programming.
The lathe is housed within an enclosure with the control panel located on the left side, enhancing operator safety and convenience. Inside the enclosure, a lathe chuck is mounted on the spindle, and a tool turret with multiple tool holders is visible. The machine appears clean and well-maintained with no visible damage, and the control panel shows minor signs of wear but remains intact and legible.
Included accessories are a 3-jaw chuck with a diameter of 250 mm, a collet device with a set of collets, a lamp, a starwheel-operated tailstock, a coolant system, a foot pedal, and sets of steel holders and toolholders. These features and accessories make the SCHAUBLIN 180 CCN R-T a comprehensive solution for precision CNC turning tasks.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Introducing the SCHAUBLIN 180 CCN R-T CNC lathe, a reliable and efficient machine designed to meet your turning needs.
- Manufacturer: SCHAUBLIN
- Model: 180 CCN R-T
- Year of Manufacture: 2002
- Technical Condition: Good
Technical Data:
- Centre Height: 275 mm
- Distance Between Centres: 600 mm
- Swing Over Cross-Slide: 150 mm
- Swing Over Bed: 600 mm
- Maximum Turning Length: 630 mm
- Bar Passage: 60 mm
- Carriage:
- Longitudinal Travel (Z-axis): 672 mm
- Transversal Stroke (X-axis): 230 mm
- Resolution: 0.001 mm
- Turret Slide:
- SAUTER Number of Positions: 8
- Fixed Tools Turret: 8
- Inner Cone Diameter: 20 x 20 mm
- Inner Cone DIN VDI 30
- Taper in Spindle:
- Camlock A2-6
- Inner Taper Type F48
- Spindle Speeds: Stepless from 30 rpm up to 4000 rpm
- Internal Spindle Diameter: 60 mm
- Feeds: 0 - 5000 mm/min
- Rapid Traverse X: 8 m/min
- Rapid Traverse Y: 10 m/min
- Spindle Motor: 15 / 18.5 kW
- Air Connect: 5 - 7 bar
- Flow Rate Cooling Water Pump: 10 l/min
- Voltage: 50 Hz 3x 400 Volt
- Noise Level: 75 dB (A)
- Total Power Required: 24 kVA
- Machine's Weight: About 2460 kg
- Overall Dimensions Machine:
- Length: 2301 mm
- Width: 1460 mm
- Height: 1676 mm
Various Accessories Included:
- 3-jaw Chuck Diameter 250 mm
- Collet Device
- Set of Collets
- Lamp
- Starwheel-operated Tailstock
- Coolant System
- Foot Pedal
- Set of Steel Holders
- Set of Toolholders
Don't miss out on the opportunity to enhance your production capabilities with the SCHAUBLIN 180 CCN R-T CNC lathe.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this SCHAUBLIN 180 CCN R-T manufactured?
This SCHAUBLIN 180 CCN R-T was manufactured in 2002.
How many hours has this SCHAUBLIN 180 CCN R-T operated?
This SCHAUBLIN 180 CCN R-T has operated for 5268 hours.
Is this SCHAUBLIN 180 CCN R-T cnc lathe used?
This SCHAUBLIN 180 CCN R-T cnc lathe is used.
Is this EMCO Turn E 65 cnc lathe used?
This EMCO Turn E 65 cnc lathe is used.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 260 |
| Last activity | Nov. 1, 2026 |
Introducing the SCHAUBLIN 180 CCN R-T CNC lathe, a reliable and efficient machine designed to meet your turning needs.
- Manufacturer: SCHAUBLIN
- Model: 180 CCN R-T
- Year of Manufacture: 2002
- Technical Condition: Good
Technical Data:
- Centre Height: 275 mm
- Distance Between Centres: 600 mm
- Swing Over Cross-Slide: 150 mm
- Swing Over Bed: 600 mm
- Maximum Turning Length: 630 mm
- Bar Passage: 60 mm
- Carriage:
- Longitudinal Travel (Z-axis): 672 mm
- Transversal Stroke (X-axis): 230 mm
- Resolution: 0.001 mm
- Turret Slide:
- SAUTER Number of Positions: 8
- Fixed Tools Turret: 8
- Inner Cone Diameter: 20 x 20 mm
- Inner Cone DIN VDI 30
- Taper in Spindle:
- Camlock A2-6
- Inner Taper Type F48
- Spindle Speeds: Stepless from 30 rpm up to 4000 rpm
- Internal Spindle Diameter: 60 mm
- Feeds: 0 - 5000 mm/min
- Rapid Traverse X: 8 m/min
- Rapid Traverse Y: 10 m/min
- Spindle Motor: 15 / 18.5 kW
- Air Connect: 5 - 7 bar
- Flow Rate Cooling Water Pump: 10 l/min
- Voltage: 50 Hz 3x 400 Volt
- Noise Level: 75 dB (A)
- Total Power Required: 24 kVA
- Machine's Weight: About 2460 kg
- Overall Dimensions Machine:
- Length: 2301 mm
- Width: 1460 mm
- Height: 1676 mm
Various Accessories Included:
- 3-jaw Chuck Diameter 250 mm
- Collet Device
- Set of Collets
- Lamp
- Starwheel-operated Tailstock
- Coolant System
- Foot Pedal
- Set of Steel Holders
- Set of Toolholders
Don't miss out on the opportunity to enhance your production capabilities with the SCHAUBLIN 180 CCN R-T CNC lathe.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this SCHAUBLIN 180 CCN R-T manufactured?
This SCHAUBLIN 180 CCN R-T was manufactured in 2002.
How many hours has this SCHAUBLIN 180 CCN R-T operated?
This SCHAUBLIN 180 CCN R-T has operated for 5268 hours.
Is this SCHAUBLIN 180 CCN R-T cnc lathe used?
This SCHAUBLIN 180 CCN R-T cnc lathe is used.
Is this EMCO Turn E 65 cnc lathe used?
This EMCO Turn E 65 cnc lathe is used.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The SCHAUBLIN 180 CCN R-T is a CNC lathe designed for precision turning operations, manufactured in 2002. It features a robust construction with overall dimensions of 2301 mm in length, 1460 mm in width, and 1676 mm in height, and weighs approximately 2460 kg.
This lathe offers a maximum turning length of 630 mm and a distance between centers of 600 mm. It has a center height of 275 mm and a swing over the bed of 600 mm, with a swing over the cross-slide of 150 mm. The spindle bore diameter is 60 mm, accommodating bar stock passage of the same size. The carriage provides a longitudinal travel (Z-axis) of 672 mm and a transversal stroke (X-axis) of 230 mm.
Equipped with a single turret, the machine supports 8 tool positions, allowing versatile tooling options. The spindle motor delivers 18.5 kW of power with speeds steplessly adjustable up to 4000 rpm, suitable for various machining requirements. The control panel is a GE Fanuc Series 18i-T, featuring a display screen and an alphanumeric keypad with function keys, enabling comprehensive machine operation and programming.
The lathe is housed within an enclosure with the control panel located on the left side, enhancing operator safety and convenience. Inside the enclosure, a lathe chuck is mounted on the spindle, and a tool turret with multiple tool holders is visible. The machine appears clean and well-maintained with no visible damage, and the control panel shows minor signs of wear but remains intact and legible.
Included accessories are a 3-jaw chuck with a diameter of 250 mm, a collet device with a set of collets, a lamp, a starwheel-operated tailstock, a coolant system, a foot pedal, and sets of steel holders and toolholders. These features and accessories make the SCHAUBLIN 180 CCN R-T a comprehensive solution for precision CNC turning tasks.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 260 |
| Last activity | Nov. 1, 2026 |
Използван SCHAUBLIN 180 CCN R-T CNC струг
Použitý CNC soustruh SCHAUBLIN 180 CCN R-T
Brugt SCHAUBLIN 180 CCN R-T cnc-drejebænk
Gebrauchte SCHAUBLIN 180 CCN R-T cnc Drehmaschine
Μεταχειρισμένος τόρνος CNC SCHAUBLIN 180 CCN R-T
Used SCHAUBLIN 180 CCN R-T cnc lathe
Torno cnc usado SCHAUBLIN 180 CCN R-T
Tour à commande numérique SCHAUBLIN 180 CCN R-T d'occasion
Rabljeni cnc strug SCHAUBLIN 180 CCN R-T
Használt SCHAUBLIN 180 CCN R-T cnc esztergagép
Tornio cnc SCHAUBLIN 180 CCN R-T
Naudotos staklės SCHAUBLIN 180 CCN R-T cnc
Gebruikte SCHAUBLIN 180 CCN R-T cnc-draaibank
Używana tokarka cnc SCHAUBLIN 180 CCN R-T
Torno cnc SCHAUBLIN 180 CCN R-T usado
Strung cnc SCHAUBLIN 180 CCN R-T
Токарный станок с ЧПУ SCHAUBLIN 180 CCN R-T
Polovna SCHAUBLIN 180 CCN R-T cnc strug
Begagnad SCHAUBLIN 180 CCN R-T cnc-svarv
Kullanılmış SCHAUBLIN 180 CCN R-T cnc torna tezgahı
EN
- Languages
English (GB)