Contact us to receive an offer.
| Manufacturer | SANDRETTO |
|---|---|
| Model | serie 9 - 500 T |
| Year | 2003 |
| Location | France
|
SANDRETTO Serie 9 – 500 T injection moulding machine, manufactured in 2003. The machine has a clamping force of 485 T and a screw diameter of 80 mm. Shot volume is 1,768 cm³, with a stated pressure on material of 1,500 bar. Tie bar spacing is 740 × 740 mm, and the platens measure 1,120 × 1,120 mm. The opening stroke is 830 mm; the stated mold thickness range is 250–850 mm. The machine is equipped with four hydraulic cores, one air valve and an L/D ratio of 20.
The injection assembly includes a hopper above the barrel, with feed hoses connected around the unit. A keypad-style control panel is mounted at the side. Visible equipment also includes hydraulic valve blocks, solenoid valves, fittings and hoses, plus a flow-control assembly with transparent tubes, adjustment knobs and gauges. A safety guard encloses the moulding area. The machine has electrical sockets and connection panels; the listed power-panel connections are four three-phase sockets, one neutral and one ground at the rear, and one three-phase socket, one neutral and one ground at the front. Two junction boxes with eight channels each are also listed. A monitor, keyboard and small scale are positioned at the operator station.
The machine weighs 21,500 kg and measures 8,710 × 2,650 × 2,140 mm (L × W × H). It has a used appearance, with visible dust, scuffing and wear on some exterior covers and components. Operational status is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
SANDRETTO 485 T Series 9
Reference: 2650/4850
Year: 2003
Condition: Very good
Technical Specifications:
Clamping force: 485 T / 4850 KN
Tie bar spacing: 740 x 740 mm
Platen dimensions: 1120 x 1120 mm
Mold thickness (Min/Max): 250-850 mm
Opening stroke: 830 mm
Injection volume: 1768 cm³
Injection pressure: 1500 bar
Screw diameter: 80 mm
L/D ratio: 20
Additional Features:
4 hydraulic cores
1 air valve
2 junction boxes with 8 channels each
Power panel:
Rear: 4 three-phase sockets, 1 neutral, 1 ground
Front: 1 three-phase socket, 1 neutral, 1 ground
Dimensions & Weight:
Weight: 21,500 kg
Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 119 |
| Last activity | Nov. 6, 2026 |
SANDRETTO 485 T Series 9
Reference: 2650/4850
Year: 2003
Condition: Very good
Technical Specifications:
Clamping force: 485 T / 4850 KN
Tie bar spacing: 740 x 740 mm
Platen dimensions: 1120 x 1120 mm
Mold thickness (Min/Max): 250-850 mm
Opening stroke: 830 mm
Injection volume: 1768 cm³
Injection pressure: 1500 bar
Screw diameter: 80 mm
L/D ratio: 20
Additional Features:
4 hydraulic cores
1 air valve
2 junction boxes with 8 channels each
Power panel:
Rear: 4 three-phase sockets, 1 neutral, 1 ground
Front: 1 three-phase socket, 1 neutral, 1 ground
Dimensions & Weight:
Weight: 21,500 kg
Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
SANDRETTO Serie 9 – 500 T injection moulding machine, manufactured in 2003. The machine has a clamping force of 485 T and a screw diameter of 80 mm. Shot volume is 1,768 cm³, with a stated pressure on material of 1,500 bar. Tie bar spacing is 740 × 740 mm, and the platens measure 1,120 × 1,120 mm. The opening stroke is 830 mm; the stated mold thickness range is 250–850 mm. The machine is equipped with four hydraulic cores, one air valve and an L/D ratio of 20.
The injection assembly includes a hopper above the barrel, with feed hoses connected around the unit. A keypad-style control panel is mounted at the side. Visible equipment also includes hydraulic valve blocks, solenoid valves, fittings and hoses, plus a flow-control assembly with transparent tubes, adjustment knobs and gauges. A safety guard encloses the moulding area. The machine has electrical sockets and connection panels; the listed power-panel connections are four three-phase sockets, one neutral and one ground at the rear, and one three-phase socket, one neutral and one ground at the front. Two junction boxes with eight channels each are also listed. A monitor, keyboard and small scale are positioned at the operator station.
The machine weighs 21,500 kg and measures 8,710 × 2,650 × 2,140 mm (L × W × H). It has a used appearance, with visible dust, scuffing and wear on some exterior covers and components. Operational status is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 119 |
| Last activity | Nov. 6, 2026 |
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
| Clamping force | 270 T |
|---|
| Clamping force | 165 T |
|---|---|
| Tie bar spacing (H) | 525 mm |
| Robot interface |
| Screw diameter | 43 mm |
|---|---|
| Tie bar spacing (V) | 525 mm |
| Mould size | 630mm |
France
2006
| Clamping force | 820 T |
|---|---|
| Tie bar spacing (H) | 1250 mm |
| Shot volume | 6107 cm³ |
| Platen length | 1730 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 120 mm |
|---|---|
| Tie bar spacing (V) | 1060 mm |
| Pressure on material | 1500 bar |
| Platen width | 1560 mm |
| Opening of the press | 1150 mm |
| Robot interface |
|---|
| Mould size |
|---|
| Robot interface |
|---|
| Mould size |
|---|
Spain
1986
| Clamping force | 135 T |
|---|---|
| Tie bar spacing (H) | 400 mm |
| Shot volume | 286 cm³ |
| Pressure on material | 1210 bar |
| Equipped with robot | No |
| Number of heating zones | 4 |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 400 mm |
| Shot weight | 286427 g |
| Bi-metal screw | No |
| Robot interface | |
| Opening of the press | 400 mm |
| Clamping force | 22 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 1768 cm³ |
| Platen length | 1120 mm |
| Robot interface | OUI |
| Mould size |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 740 mm |
| Pressure on material | 1500 bar |
| Platen width | 1120 mm |
| Number of cores | 4 |
| Screw diameter | 90 mm |
|---|---|
| Tie bar spacing (V) | 1060 mm |
| Bi-metal screw | Yes |
| Robot interface | euromap 12 |
| Tie bar spacing (H) | 1060 mm |
|---|---|
| Shot volume | 2831 cm³ |
| Equipped with robot | Yes |
| Mould size |
| Clamping force | 35000 T |
|---|---|
| Tie bar spacing (H) | 2230 mm |
| Shot volume | 3611018000 cm³ |
| Platen width | 3060 mm |
| Robot interface | master mattic rb 500cn |
| Opening of the press | 2300 mm |
| Screw diameter | 200 mm |
|---|---|
| Tie bar spacing (V) | 1930 mm |
| Platen length | 3360 mm |
| Equipped with robot | Yes |
| Number of heating zones | 6 |
| Mould size |
Italy
1996
| Clamping force | 220 T |
|---|---|
| Shot volume | 520 cm³ |
| Mould size |
| Screw diameter | 55 mm |
|---|---|
| Robot interface | euromap 12 |
| Clamping force | 220 T |
|---|---|
| Tie bar spacing (H) | 585 mm |
| Shot volume | 863 cm³ |
| Robot interface |
| Screw diameter | 63 mm |
|---|---|
| Tie bar spacing (V) | 585 mm |
| Pressure on material | 1108 bar |
| Mould size |
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1230 mm |
| Shot volume | 11296 cm³ |
| Platen width | 1820 mm |
| Opening of the press | 1350 mm |
| Screw diameter | 150 mm |
|---|---|
| Tie bar spacing (V) | 1230 mm |
| Platen length | 1820 mm |
| Robot interface | |
| Mould size |
| Clamping force | 220 T |
|---|---|
| Tie bar spacing (H) | 510 mm |
| Shot volume | 546 cm³ |
| Pressure on material | 1450 bar |
| Platen width | 770 mm |
| Mould size |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 510 mm |
| Shot weight | 496 g |
| Platen length | 770 mm |
| Robot interface |
| Robot interface |
|---|
| Mould size |
|---|
United Kingdom
2012
| Clamping force | 820 T |
|---|---|
| Tie bar spacing (V) | 1060 mm |
| Robot interface |
| Tie bar spacing (H) | 1250 mm |
|---|---|
| Shot weight | 2550 g |
| Mould size |
| Clamping force | 330 T |
|---|---|
| Tie bar spacing (H) | 650 mm |
| Shot volume | 863 cm³ |
| Pressure on material | 1550 bar |
| Platen width | 980 mm |
| Mould size |
| Screw diameter | 65 mm |
|---|---|
| Tie bar spacing (V) | 650 mm |
| Shot weight | 776 g |
| Platen length | 980 mm |
| Robot interface |
| Clamping force | 240 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 546 cm³ |
| Robot interface |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Pressure on material | 1450 bar |
| Mould size |
United Kingdom
2003
| Clamping force | 1300 T |
|---|---|
| Tie bar spacing (V) | 1400 mm |
| Robot interface |
| Tie bar spacing (H) | 1500 mm |
|---|---|
| Shot weight | 5618 g |
| Mould size |
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 863 cm³ |
| Platen length | 860 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 63 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Pressure on material | 1515 bar |
| Platen width | 860 mm |
| Opening of the press | 630 mm |
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | mm |
| Shot volume | cm³ |
| Pressure on material | bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | mm |
| Screw diameter | mm |
|---|---|
| Tie bar spacing (V) | mm |
| Shot weight | g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 110 T |
|---|---|
| Tie bar spacing (H) | 415 mm |
| Shot volume | 353 cm³ |
| Platen length | 610 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 415 mm |
| Pressure on material | 1215 bar |
| Platen width | 610 mm |
| Opening of the press | 410 mm |
| Clamping force | 240 T |
|---|---|
| Tie bar spacing (H) | 630 mm |
| Shot volume | 546 cm³ |
| Platen width | 860 mm |
| Opening of the press | 630 mm |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Platen length | 860 mm |
| Robot interface | |
| Mould size |
| Clamping force | 1200 T |
|---|---|
| Tie bar spacing (H) | 1404 mm |
| Shot volume | 10200 cm³ |
| Mould size |
| Screw diameter | 150 mm |
|---|---|
| Tie bar spacing (V) | 1404 mm |
| Robot interface |
| Clamping force | 40 T |
|---|---|
| Tie bar spacing (H) | 266 mm |
| Shot volume | 80 cm³ |
| Pressure on material | 1970 bar |
| Platen width | mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | 270 mm |
| Screw diameter | 28 mm |
|---|---|
| Tie bar spacing (V) | 266 mm |
| Shot weight | 77 g |
| Platen length | mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 500 T |
|---|---|
| Tie bar spacing (H) | 720 mm |
| Shot volume | 2110 cm³ |
| Robot interface |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 720 mm |
| Shot weight | 2050 g |
| Mould size |
| Clamping force | 230 T |
|---|---|
| Tie bar spacing (H) | 585 mm |
| Shot volume | 475 cm³ |
| Platen length | 860 mm |
| Robot interface |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 585 mm |
| Pressure on material | 1876 bar |
| Platen width | 857 mm |
| Mould size |
| Clamping force | 95 T |
|---|---|
| Tie bar spacing (H) | 370 mm |
| Shot volume | 286 cm³ |
| Platen length | 560 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 370 mm |
| Pressure on material | 1500 bar |
| Platen width | 560 mm |
| Opening of the press | 410 mm |
| Robot interface |
|---|
| Mould size |
|---|
Машина за пластмаса SANDRETTO serie 9 - 500 T
Plastový stroj SANDRETTO serie 9 - 500 T
SANDRETTO serie 9 - 500 T Plastmaskine
SANDRETTO serie 9 - 500 T Kunststoffmaschine
Πλαστική μηχανή SANDRETTO serie 9 - 500 T
Sandretto 500 T injection molding machine type 2650/4850
Máquina de plástico SANDRETTO serie 9 - 500 T
Machine pour le plastique SANDRETTO serie 9 - 500 T
Stroj za plastiku SANDRETTO serie 9 - 500 T
SANDRETTO serie 9 - 500 T Műanyaggyártó gép
Macchina per la lavorazione della plastica SANDRETTO serie 9 - 500 T
SANDRETTO serie 9 - 500 T Plastikinė mašina
SANDRETTO serie 9 - 500 T Kunststofmachine
Maszyna do tworzyw sztucznych SANDRETTO serie 9 - 500 T
Máquina de plástico SANDRETTO serie 9 - 500 T
Mașină de plastic SANDRETTO serie 9 - 500 T
SANDRETTO serie 9 - 500 T Пластиковая машина
Mašina za plastiku SANDRETTO serie 9 - 500 T
SANDRETTO serie 9 - 500 T Plastmaskin
Plastik makinesi SANDRETTO serie 9 - 500 T
Romania
Poland
EN
- Languages
English (GB)