Contact us to receive an offer.
| Manufacturer | SANDRETTO |
|---|---|
| Model | S7/135 |
| Year | 1986 |
| Location | Spain
|
This Sandretto S7/135 injection molding machine, manufactured in 1986, offers a clamping force of 135 tons and features a 4-column toggle clamp design. The tie bar spacing measures 400 mm by 400 mm, providing a mold height range from 150 to 500 mm. The machine has an opening stroke of 400 mm and an ejector stroke of 150 mm. It is equipped with spindles sized 45, 50, and 55 mm, supporting an injection volume range of 286 to 427 cm³ and an injection pressure between 1210 and 1800 bar. The machine includes 4 heating zones to ensure precise temperature control during operation. Its installed power is 31 kW. The overall dimensions are approximately 4900 mm in length, 1200 mm in width, and 2050 mm in height, with a weight around 5700 kg.
The machine is housed in a grey and orange color scheme and is installed in a clean industrial environment. A blue motor is attached to the right side, and a hopper with a blue light is mounted above the injection unit. The mold area is protected by an orange safety cover. The control panel includes an emergency stop button located on the lower left side for operator safety. Below the mold area, a metal chute facilitates part ejection. Hydraulic hoses and power cables are connected at the rear and right side of the machine. The mold plates show signs of use but appear intact without visible damage. There are minor paint scratches and wear on the grey body near the top left side, indicating normal operational wear. Overall, the machine presents visible wear marks on metal parts but no obvious damage, suggesting it has been maintained in functional condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Clamping force 135 t, 4-column toggle clamp, column spacing 400×400 mm, mold height 150–500 mm, opening 400 mm, ejector 150 mm, 45/50/55 mm spindles, injection volume 286–427 cm³, injection pressure 1210–1800 bar, 4 heating zones, installed power 31 kW, dimensions approx. 4900×1200×2050 mm, weight approx. 5000–5700 kg. Machine No. 959
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Sandretto S7/135 injection machine still available?
This Sandretto S7/135 injection machine is available.
Is this Sandretto S7/135 injection machine currently under voltage?
This Sandretto S7/135 injection machine is not visible in operation (under voltage).
What is this Sandretto S7/135?
This Sandretto S7/135 plastic injection molding machine (Ref: PFP-005X) is the equipment.
What category is this SANDRETTO S7/135?
This SANDRETTO S7/135 plastic injection molding machine.
Can the Sandretto machine be tested in operation?
This Sandretto machine is not connected and cannot be tested in operation.
What are the dimensions of this injection molding machine?
This Sandretto injection molding machine measures 4,900 × 1,200 × 2,050 mm.
How much does the machine weigh?
This Sandretto injection molding machine weighs 5,700 kg.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 116 |
| Last activity | Oct. 31, 2026 |
Clamping force 135 t, 4-column toggle clamp, column spacing 400×400 mm, mold height 150–500 mm, opening 400 mm, ejector 150 mm, 45/50/55 mm spindles, injection volume 286–427 cm³, injection pressure 1210–1800 bar, 4 heating zones, installed power 31 kW, dimensions approx. 4900×1200×2050 mm, weight approx. 5000–5700 kg. Machine No. 959
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Sandretto S7/135 injection machine still available?
This Sandretto S7/135 injection machine is available.
Is this Sandretto S7/135 injection machine currently under voltage?
This Sandretto S7/135 injection machine is not visible in operation (under voltage).
What is this Sandretto S7/135?
This Sandretto S7/135 plastic injection molding machine (Ref: PFP-005X) is the equipment.
What category is this SANDRETTO S7/135?
This SANDRETTO S7/135 plastic injection molding machine.
Can the Sandretto machine be tested in operation?
This Sandretto machine is not connected and cannot be tested in operation.
What are the dimensions of this injection molding machine?
This Sandretto injection molding machine measures 4,900 × 1,200 × 2,050 mm.
How much does the machine weigh?
This Sandretto injection molding machine weighs 5,700 kg.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Sandretto S7/135 injection molding machine, manufactured in 1986, offers a clamping force of 135 tons and features a 4-column toggle clamp design. The tie bar spacing measures 400 mm by 400 mm, providing a mold height range from 150 to 500 mm. The machine has an opening stroke of 400 mm and an ejector stroke of 150 mm. It is equipped with spindles sized 45, 50, and 55 mm, supporting an injection volume range of 286 to 427 cm³ and an injection pressure between 1210 and 1800 bar. The machine includes 4 heating zones to ensure precise temperature control during operation. Its installed power is 31 kW. The overall dimensions are approximately 4900 mm in length, 1200 mm in width, and 2050 mm in height, with a weight around 5700 kg.
The machine is housed in a grey and orange color scheme and is installed in a clean industrial environment. A blue motor is attached to the right side, and a hopper with a blue light is mounted above the injection unit. The mold area is protected by an orange safety cover. The control panel includes an emergency stop button located on the lower left side for operator safety. Below the mold area, a metal chute facilitates part ejection. Hydraulic hoses and power cables are connected at the rear and right side of the machine. The mold plates show signs of use but appear intact without visible damage. There are minor paint scratches and wear on the grey body near the top left side, indicating normal operational wear. Overall, the machine presents visible wear marks on metal parts but no obvious damage, suggesting it has been maintained in functional condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 116 |
| Last activity | Oct. 31, 2026 |
Машина за леене под налягане SANDRETTO S7/135
Vstřikolis SANDRETTO S7/135
SANDRETTO S7/135 Sprøjtestøbemaskine
SANDRETTO S7/135 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση SANDRETTO S7/135
SANDRETTO S7/135 Injection moulding machine
Inyectora de plástico SANDRETTO S7/135
Presse à injecter SANDRETTO S7/135
Stroj za injekcijsko prešanje SANDRETTO S7/135
SANDRETTO S7/135 Fröccsöntő gép
Pressa ad iniezione SANDRETTO S7/135
Įpurškimo formavimo mašina SANDRETTO S7/135
SANDRETTO S7/135 Spuitgietmachine
Wtryskarka SANDRETTO S7/135
Máquina de injecção SANDRETTO S7/135
Mașină de turnat prin injecție SANDRETTO S7/135
SANDRETTO S7/135 Термопластавтомат
Mašina za brizganje SANDRETTO S7/135
SANDRETTO S7/135 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi SANDRETTO S7/135
EN
- Languages
English (GB)