Kern K40-15 Overwrapping machine

Russia 2007

Enveloping line KERN K40-15 is designed for film packaging of magazines, books and other similar printed products. The K40-15 is an extremely flexible system that can be easily and quickly set up to work with products of the required format. The system is able to work with great efficiency. The maximum capacity of the line is 15,000 pieces per hour. Design. The line has a modular design, including: - continuous log loader (ASH module); - main feeder (SHTH); - main conveyor (modules FM2 and FMB); - FPO cover opening (lifting) module; - two additional attached feeders RS341; - film insertion module K40-15; - culling module; - product flip module; - label sticker module; - stacker; - output conveyor

40,000 €

View product

Kallfass Compact 450 Overwrapping machine

Russia 2005

Automatic line for packaging products in shrink film Kallfass Compact 450. 1. Appointment. The line is designed for packaging products in shrink film. 2. Working principle. Products from the conveyor of the production equipment enter the feeding conveyor of the packaging line. On the infeed conveyor, the product is aligned along the line of motion and then enters the inlet conveyor of the film packaging section. In the packaging section, the products, moving along the introductory conveyor, enter the inside of the half-sleeve of the packaging film, and then move along with the film to the zone of the transverse knife. The cross cutter cuts the film to a predetermined length while sealing it. Further, the product in the film passes to the output conveyor, where the longitudinal knife cuts off the side of the film, also sealing it at the same time. After that, the completely sealed package with the products enters the thermal tunnel, in which, under the influence of high temperature, the film shrinks. Line operation control and operation parameters setting are carried out from the control panel. The remote contains buttons and a touch screen. The line can operate in automatic, semi-automatic and manual modes. 3. …

21,500 €

View product

Ulma Nevada Overwrapping machine

Belarus 2007

For sale: Flow-pack packaging machine by Ulma Manufacturer: Ulma Model: Nevada Year of Manufacture: 2007 Technical Condition: Good Total Power: 17 kW Voltage: 380V Frequency: 50 Hz Current: 11A Dimensions: - Width: 1200 mm - Length: 5000 mm - Height: 1600 mm Infeed Conveyor Length: 2800 mm Technology: Darfresh technology allows the top film to tightly hug the product, fully following its contours. This machine is suitable for various packaging needs and is in good working condition.

21,500 €

View product

Ilapak delta 3000 TDR B DX Horizontal Packaging machine

Belarus

Horizontal Packaging Machine (Flow-Pack) Brand / Model: ILAPAK Delta 3000 TDR B DX Country of Manufacture: Switzerland Intended Use: Professional automatic packaging of various food and non-food products into three-seal bags (pillow type) Supply Voltage: 400 V (three-phase network) Frequency: 50-60 Hz Power Consumption: 7,000 W (7 kW) Technical Condition: Good

21,500 €

View product

Used Cellophane / overwrapping machines for sale

Kern K40-15 Overwrapping machine

Kallfass Compact 450 Overwrapping machine

Ulma Nevada Overwrapping machine

Ilapak delta 3000 TDR B DX Horizontal Packaging machine