Contact us to receive an offer.
| Manufacturer | Kallfass |
|---|---|
| Model | Compact 450 |
| Year | 2005 |
| Location | Russia
|
| Category | Cellophane / overwrapping machines |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | |
| Last availability date | 02/03/2026 |
| Product id | P230803122 |
| Language |
Kallfass Compact 450
Balicí stroj do celofánu Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450 Umverpackungsmaschine
Kallfass Compact 450
Kallfass Compact 450 Overwrapping machine
Encelofanadora Kallfass Compact 450
Cellophaneuse Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Incelofanatrice Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Celofoniarka Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Zarf tipi paketleme makinesi Kallfass Compact 450
|
The Kallfass Compact 450 is an automatic packaging line designed for wrapping products in shrink film. Manufactured in 2005, this industrial machine efficiently packages items by enclosing them in a half-sleeve of shrink film, which is then sealed and shrunk to fit tightly around the product.
The packaging process begins as products arrive from the production equipment conveyor onto the feeding conveyor of the packaging line. On this infeed conveyor, products are aligned along the direction of movement before entering the film packaging section. Here, products enter the half-sleeve of packaging film and move along with the film to the transverse cutting and sealing zone. The cross cutter cuts the film to a predetermined length while simultaneously sealing it. The package then moves to the output conveyor where a longitudinal knife trims the side of the film and seals it, resulting in a fully enclosed package. Finally, the sealed package passes through a thermal shrink tunnel where heat causes the film to shrink tightly around the product.
The line operation is controlled via a control panel equipped with buttons, switches, and a touch screen, allowing operation in automatic, semi-automatic, and manual modes. The line includes a feeding conveyor, a film packaging section with an electrical cabinet, and a shrink tunnel.
The machine features a metal casing with ventilation grilles and is equipped with large rolls of packaging film mounted on the sides. The control panel is located on the right side and includes buttons and emergency stop controls. The machine is CE marked and complies with relevant European standards (EN 60439-1, RL-(98/37/EG), RL-(73/23/EWG), RL-(89/336/EWG)). It operates on a 3-phase 400 V power supply with a total power rating of 25.6 kVA approximately. The equipment shows signs of prior use with some wear marks and dust but appears structurally intact and suitable for continued operation in an industrial environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Automatic line for packaging products in shrink film Kallfass Compact 450.
1. Appointment.
The line is designed for packaging products in shrink film.
2. Working principle.
Products from the conveyor of the production equipment enter the feeding conveyor of the packaging line. On the infeed conveyor, the product is aligned along the line of motion and then enters the inlet conveyor of the film packaging section.
In the packaging section, the products, moving along the introductory conveyor, enter the inside of the half-sleeve of the packaging film, and then move along with the film to the zone of the transverse knife. The cross cutter cuts the film to a predetermined length while sealing it. Further, the product in the film passes to the output conveyor, where the longitudinal knife cuts off the side of the film, also sealing it at the same time. After that, the completely sealed package with the products enters the thermal tunnel, in which, under the influence of high temperature, the film shrinks.
Line operation control and operation parameters setting are carried out from the control panel. The remote contains buttons and a touch screen.
The line can operate in automatic, semi-automatic and manual modes.
3. Composition of the line:
- feeding conveyor;
- film packaging section with control panel and electrical cabinet;
- shrink tunnel.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Oct. 21, 2025 |
Automatic line for packaging products in shrink film Kallfass Compact 450.
1. Appointment.
The line is designed for packaging products in shrink film.
2. Working principle.
Products from the conveyor of the production equipment enter the feeding conveyor of the packaging line. On the infeed conveyor, the product is aligned along the line of motion and then enters the inlet conveyor of the film packaging section.
In the packaging section, the products, moving along the introductory conveyor, enter the inside of the half-sleeve of the packaging film, and then move along with the film to the zone of the transverse knife. The cross cutter cuts the film to a predetermined length while sealing it. Further, the product in the film passes to the output conveyor, where the longitudinal knife cuts off the side of the film, also sealing it at the same time. After that, the completely sealed package with the products enters the thermal tunnel, in which, under the influence of high temperature, the film shrinks.
Line operation control and operation parameters setting are carried out from the control panel. The remote contains buttons and a touch screen.
The line can operate in automatic, semi-automatic and manual modes.
3. Composition of the line:
- feeding conveyor;
- film packaging section with control panel and electrical cabinet;
- shrink tunnel.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Cellophane / overwrapping machines |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | |
| Last availability date | 02/03/2026 |
| Product id | P230803122 |
| Language |
Kallfass Compact 450
Balicí stroj do celofánu Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450 Umverpackungsmaschine
Kallfass Compact 450
Kallfass Compact 450 Overwrapping machine
Encelofanadora Kallfass Compact 450
Cellophaneuse Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Incelofanatrice Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Celofoniarka Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Kallfass Compact 450
Zarf tipi paketleme makinesi Kallfass Compact 450
|
The Kallfass Compact 450 is an automatic packaging line designed for wrapping products in shrink film. Manufactured in 2005, this industrial machine efficiently packages items by enclosing them in a half-sleeve of shrink film, which is then sealed and shrunk to fit tightly around the product.
The packaging process begins as products arrive from the production equipment conveyor onto the feeding conveyor of the packaging line. On this infeed conveyor, products are aligned along the direction of movement before entering the film packaging section. Here, products enter the half-sleeve of packaging film and move along with the film to the transverse cutting and sealing zone. The cross cutter cuts the film to a predetermined length while simultaneously sealing it. The package then moves to the output conveyor where a longitudinal knife trims the side of the film and seals it, resulting in a fully enclosed package. Finally, the sealed package passes through a thermal shrink tunnel where heat causes the film to shrink tightly around the product.
The line operation is controlled via a control panel equipped with buttons, switches, and a touch screen, allowing operation in automatic, semi-automatic, and manual modes. The line includes a feeding conveyor, a film packaging section with an electrical cabinet, and a shrink tunnel.
The machine features a metal casing with ventilation grilles and is equipped with large rolls of packaging film mounted on the sides. The control panel is located on the right side and includes buttons and emergency stop controls. The machine is CE marked and complies with relevant European standards (EN 60439-1, RL-(98/37/EG), RL-(73/23/EWG), RL-(89/336/EWG)). It operates on a 3-phase 400 V power supply with a total power rating of 25.6 kVA approximately. The equipment shows signs of prior use with some wear marks and dust but appears structurally intact and suitable for continued operation in an industrial environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Oct. 21, 2025 |
EN
- Languages
English (GB)