| Manufacturer | MULTIVAC |
|---|---|
| Model | F100 |
| Year | 2014 |
| Location | USA
|
MULTIVAC Baseline F100 thermoformer, manufactured in 2014. The machine has stainless-steel processing sections and white side panels, with a long infeed/output section and film-handling and sealing assembly. Film rolls are mounted above the machine bed, alongside feed rollers and touchscreen controls. Clear formed packaging cavities are present in the processing area, and the line is set up for running three across. A Bell-Mark IntelliJet TS inkjet coder is included. The control displays appear dark; their operating condition has not been confirmed. The white panels show visible scuffs and surface marks.
The current listing describes three sets of dies for 2-up, 3-up and 4-up configurations. It gives a maximum forming depth of 95 mm, maximum cut-off length of 300 mm, and compatibility with films up to 400 microns. The listed electrical supply is 3-phase, 60 cycles, 220 volts. The known moulding specifications are a length of 9.0 mm and a width of 4.75 mm. The current listing also describes a setup for three across, with a stated size of 9 inches long by 4-3/4 inches wide.
The machine is equipped with a MULTIVAC touchscreen control panel and a separate Bell-Mark IntelliJet TS controller. A stainless-steel work table is positioned in front of the line. This listing describes the equipment and included accessories; no claim is made about operational or tested condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
fillers
volumetric fillers
Multivac model Baseline F100 thermoformer - Stainless steel - Bell-Mark Intelijet TS ink jet coder - Set up for running 3 across of 9” long x 4-3/4” wide - 3 sets of dies for 2-up, 3-up, and 4-up - Maximum forming depth 95 mm - Maximum cut off length 300 mm - Films up to 400 microns - 3 phase, 60 cycles, 220 volts - Manufactured in 2014 - -
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 62 |
| Last activity | Oct. 25, 2026 |
fillers
volumetric fillers
Multivac model Baseline F100 thermoformer - Stainless steel - Bell-Mark Intelijet TS ink jet coder - Set up for running 3 across of 9” long x 4-3/4” wide - 3 sets of dies for 2-up, 3-up, and 4-up - Maximum forming depth 95 mm - Maximum cut off length 300 mm - Films up to 400 microns - 3 phase, 60 cycles, 220 volts - Manufactured in 2014 - -
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
MULTIVAC Baseline F100 thermoformer, manufactured in 2014. The machine has stainless-steel processing sections and white side panels, with a long infeed/output section and film-handling and sealing assembly. Film rolls are mounted above the machine bed, alongside feed rollers and touchscreen controls. Clear formed packaging cavities are present in the processing area, and the line is set up for running three across. A Bell-Mark IntelliJet TS inkjet coder is included. The control displays appear dark; their operating condition has not been confirmed. The white panels show visible scuffs and surface marks.
The current listing describes three sets of dies for 2-up, 3-up and 4-up configurations. It gives a maximum forming depth of 95 mm, maximum cut-off length of 300 mm, and compatibility with films up to 400 microns. The listed electrical supply is 3-phase, 60 cycles, 220 volts. The known moulding specifications are a length of 9.0 mm and a width of 4.75 mm. The current listing also describes a setup for three across, with a stated size of 9 inches long by 4-3/4 inches wide.
The machine is equipped with a MULTIVAC touchscreen control panel and a separate Bell-Mark IntelliJet TS controller. A stainless-steel work table is positioned in front of the line. This listing describes the equipment and included accessories; no claim is made about operational or tested condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 62 |
| Last activity | Oct. 25, 2026 |
| Moulding length | 360 mm |
|---|---|
| Forming depth | 75 mm |
| Moulding width | 265 mm |
|---|---|
| Engine Power | 16 kW |
| Moulding length | 236 mm |
|---|
| Moulding width | 186 mm |
|---|
Sweden
2010
| Moulding width | 420 mm |
|---|
United Kingdom
| Moulding length | 300 mm |
|---|---|
| Forming depth | 120 mm |
| Moulding width | 175 mm |
|---|---|
| Engine Power | 9 kW |
Sweden
2005
| Moulding length | mm |
|---|---|
| Forming depth | mm |
| Moulding width | 420 mm |
|---|---|
| Engine Power | kW |
Netherlands
2021
| Moulding length | 360 mm |
|---|---|
| Forming depth | 75 mm |
| Moulding width | 645 mm |
|---|---|
| Engine Power | 16 kW |
| Moulding length | 244 mm |
|---|---|
| Forming depth | 80 mm |
| Moulding width | 364 mm |
|---|---|
| Engine Power | 9 kW |
| Moulding length | 165 mm |
|---|---|
| Forming depth | 80 mm |
| Moulding width | 80 mm |
|---|---|
| Engine Power | 8 kW |
| Moulding length | 263 mm |
|---|---|
| Forming depth | 60 mm |
| Moulding width | 265 mm |
|---|---|
| Engine Power | 12 kW |
Sweden
1999
| Moulding length | mm |
|---|---|
| Forming depth | mm |
| Moulding width | mm |
|---|---|
| Engine Power | kW |
Turkey
2006
United Kingdom
United Kingdom
2011
| Moulding length | 530 mm |
|---|---|
| Forming depth | 360 mm |
| Moulding width | 160 mm |
|---|
United Kingdom
2013
| Moulding length | 195 mm |
|---|---|
| Forming depth | 260 mm |
| Moulding width | 465 mm |
|---|
Greece
1988
| Moulding length | 375 mm |
|---|---|
| Forming depth | mm |
| Moulding width | 420 mm |
|---|---|
| Engine Power | 20 kW |
Poland
2011
| Moulding length | mm |
|---|---|
| Forming depth | mm |
| Moulding width | 530 mm |
|---|---|
| Engine Power | 27 kW |
United Kingdom
2009
United Kingdom
1998
United Kingdom
2000
| Moulding length | 360 mm |
|---|---|
| Forming depth | 75 mm |
| Moulding width | 137 mm |
|---|---|
| Engine Power | 16 kW |
Poland
2005
| Engine Power | 6 kW |
|---|
Ireland
1999
| Moulding length | 200 mm |
|---|---|
| Forming depth | 110 mm |
| Moulding width | 170 mm |
|---|---|
| Engine Power | 11 kW |
| Moulding length | 360 mm |
|---|---|
| Forming depth | 75 mm |
| Moulding width | 137 mm |
|---|---|
| Engine Power | 29 kW |
Poland
2012
| Moulding length | mm |
|---|---|
| Forming depth | mm |
| Moulding width | mm |
|---|---|
| Engine Power | kW |
Линия за формоване, пълнене и запечатване (FFS) MULTIVAC F100
Linka pro tvarování, plnění a uzavírání (FFS) MULTIVAC F100
MULTIVAC F100 Form-, fylde- og forseglingslinje (FFS)
MULTIVAC F100 Form-, Füll- und Siegelanlage (FFS)
Γραμμή διαμόρφωσης, πλήρωσης και σφράγισης (FFS) MULTIVAC F100
MULTIVAC F100 Form, Fill and Seal (FFS) line
Línea de formado, llenado y sellado (FFS) MULTIVAC F100
Ligne de formage, remplissage et scellage (FFS) MULTIVAC F100
Linija za oblikovanje, punjenje i zavarivanje (FFS) MULTIVAC F100
MULTIVAC F100 Formázó, töltő és lezáró sor (FFS)
Linea di formatura, riempimento e saldatura (FFS) MULTIVAC F100
MULTIVAC F100 Formavimo, pildymo ir sandarinimo linija (FFS)
MULTIVAC F100 Vorm-, vul- en seallijn (FFS)
Linia formowania, napełniania i zgrzewania (FFS) MULTIVAC F100
Linha de formação, enchimento e selagem (FFS) MULTIVAC F100
Linie de formare, umplere și sigilare (FFS) MULTIVAC F100
MULTIVAC F100 Линия формирования, наполнения и запайки (FFS)
Linija za formiranje, punjenje i zaptivanje (FFS) MULTIVAC F100
MULTIVAC F100 Form-, fyll- och förslutningslinje (FFS)
Şekillendirme, doldurma ve kapatma hattı (FFS) MULTIVAC F100
Germany
Norway
EN
- Languages
English (GB)