| Manufacturer | MORI SEIKI |
|---|---|
| Model | DURATURN 2050 |
| Year | 2012 |
| Location | USA
|
Overview:
This listing describes a CNC lathe (category: Lathes - CNC lathes) equipped for general turning and production work. Key included items and features listed by the seller: 8" 3‑jaw hydraulic chuck, 12‑station automatic turret, programmable tailstock, automatic tool presetter, chip conveyor, and a foot switch.
Control and Features:
- Fanuc Oi‑TD Series CNC control
- PCMCIA card slot
- Rigid tapping capability
- Coolant tank (without pump)
Capacities:
- Maximum turning diameter: 14.50"
- Maximum turning length: 20.80"
- Maximum bar capacity: 2.00"
- Swing over bed: 24"
- Swing over cross slide: 18.90"
Axis Travels and Speeds:
- X axis travel: 8.3"
- Z axis travel: 22.4"
- Rapid traverse X axis: 945 IPM
- Rapid traverse Z axis: 945 IPM
Spindle:
- Spindle nose: A2‑6
- Spindle bore: 2.56"
- Spindle speed: 4000 RPM
- Spindle motor: 18 HP
Turret and Tailstock:
- Turret capacity: 12 stations
- Turret index time: 0.25 second
- Tailstock taper: MT‑4
- Tailstock quill diameter: 3.1"
- Tailstock quill travel: 3.14"
Electrical / General:
- Power source: AC 220V / 3‑Phase / 60 Hz
- Power requirement: 22 kVA
- Machine dimensions: 86" x 72" x 69" (H)
- Machine weight: approximately 8,378 lbs
Notes and Terms:
All specifications, capacities and hours are approximate and provided for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice. Equipment is sold AS‑IS, WHERE‑IS. All sales are final.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
8″ 3-Jaw Hydrualic Chuck
12 Station Automatic Turret
Programmable Tailstock
Automatic Tool Presetter
Chip Conveyor
Foot Switch
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
Fanuc Oi-TD Series CNC Control
PCMCIA Card Slot
Rigid Tapping
Coolant Tank without Pump
Capacity:
Max Turning Diameter: 14.50″
Max Turning Length: 20.80″
Max Bar Capacity: 2.00″
Swing Over Bed: 24″
Swing Over Cross Slide: 18.90″
Travels:
X Axis Travel: 8.3″
Z Axis Travel: 22.4″
Rapid Traverse X Axis: 945 IPM
Rapid Traverse Z Axis: 945 IPM
Spindle:
Spindle Nose: A2-6
Spindle Bore: 2.56″
Spindle Speed: 4000 RPM
Spindle Motor: 18 HP
Turret:
Turret Capacity: 12 Stations
Turret Index Time: 0.25 Second
Tailstock:
Tailstock Taper: MT-4
Tailstock Quill Dia.: 3.1″
Tailstock Quill Travel: 3.14″
General:
Power Source: AC 220V / 3-Phase / 60 Hz
Power Requirement: 22 kVA
Machine Dimensions: 86″ x 72″ x 69″ High
Machine Weight: 8,378 lbs Approx.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2024 |
| Offers online | 23 |
| Last activity | Oct. 26, 2026 |
8″ 3-Jaw Hydrualic Chuck
12 Station Automatic Turret
Programmable Tailstock
Automatic Tool Presetter
Chip Conveyor
Foot Switch
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
Fanuc Oi-TD Series CNC Control
PCMCIA Card Slot
Rigid Tapping
Coolant Tank without Pump
Capacity:
Max Turning Diameter: 14.50″
Max Turning Length: 20.80″
Max Bar Capacity: 2.00″
Swing Over Bed: 24″
Swing Over Cross Slide: 18.90″
Travels:
X Axis Travel: 8.3″
Z Axis Travel: 22.4″
Rapid Traverse X Axis: 945 IPM
Rapid Traverse Z Axis: 945 IPM
Spindle:
Spindle Nose: A2-6
Spindle Bore: 2.56″
Spindle Speed: 4000 RPM
Spindle Motor: 18 HP
Turret:
Turret Capacity: 12 Stations
Turret Index Time: 0.25 Second
Tailstock:
Tailstock Taper: MT-4
Tailstock Quill Dia.: 3.1″
Tailstock Quill Travel: 3.14″
General:
Power Source: AC 220V / 3-Phase / 60 Hz
Power Requirement: 22 kVA
Machine Dimensions: 86″ x 72″ x 69″ High
Machine Weight: 8,378 lbs Approx.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview:
This listing describes a CNC lathe (category: Lathes - CNC lathes) equipped for general turning and production work. Key included items and features listed by the seller: 8" 3‑jaw hydraulic chuck, 12‑station automatic turret, programmable tailstock, automatic tool presetter, chip conveyor, and a foot switch.
Control and Features:
- Fanuc Oi‑TD Series CNC control
- PCMCIA card slot
- Rigid tapping capability
- Coolant tank (without pump)
Capacities:
- Maximum turning diameter: 14.50"
- Maximum turning length: 20.80"
- Maximum bar capacity: 2.00"
- Swing over bed: 24"
- Swing over cross slide: 18.90"
Axis Travels and Speeds:
- X axis travel: 8.3"
- Z axis travel: 22.4"
- Rapid traverse X axis: 945 IPM
- Rapid traverse Z axis: 945 IPM
Spindle:
- Spindle nose: A2‑6
- Spindle bore: 2.56"
- Spindle speed: 4000 RPM
- Spindle motor: 18 HP
Turret and Tailstock:
- Turret capacity: 12 stations
- Turret index time: 0.25 second
- Tailstock taper: MT‑4
- Tailstock quill diameter: 3.1"
- Tailstock quill travel: 3.14"
Electrical / General:
- Power source: AC 220V / 3‑Phase / 60 Hz
- Power requirement: 22 kVA
- Machine dimensions: 86" x 72" x 69" (H)
- Machine weight: approximately 8,378 lbs
Notes and Terms:
All specifications, capacities and hours are approximate and provided for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice. Equipment is sold AS‑IS, WHERE‑IS. All sales are final.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2024 |
| Offers online | 23 |
| Last activity | Oct. 26, 2026 |
CNC струг MORI SEIKI DURATURN 2050
CNC soustruh MORI SEIKI DURATURN 2050
MORI SEIKI DURATURN 2050 CNC-drejebænk
MORI SEIKI DURATURN 2050 CNC-Drehmaschine
Τόρνος CNC MORI SEIKI DURATURN 2050
MORI SEIKI DURATURN 2050 CNC lathe
Torno CNC MORI SEIKI DURATURN 2050
Tour CNC MORI SEIKI DURATURN 2050
CNC tokarski stroj MORI SEIKI DURATURN 2050
MORI SEIKI DURATURN 2050 CNC esztergagép
Tornio CNC MORI SEIKI DURATURN 2050
MORI SEIKI DURATURN 2050 CNC tekinimo staklės
MORI SEIKI DURATURN 2050 CNC-draaibank
Tokarka CNC MORI SEIKI DURATURN 2050
Torno CNC MORI SEIKI DURATURN 2050
Strung CNC MORI SEIKI DURATURN 2050
MORI SEIKI DURATURN 2050 Токарный станок с ЧПУ
CNC strug MORI SEIKI DURATURN 2050
MORI SEIKI DURATURN 2050 CNC-svarv
CNC torna MORI SEIKI DURATURN 2050
EN
- Languages
English (GB)