Contact us to receive an offer.
| Manufacturer | MITSUBISHI |
|---|---|
| Model | BA24 |
| Year | |
| Location | Portugal
|
The Mitsubishi BA24 is a wire cutting EDM machine designed for precision machining tasks. It features the Mitsubishi V350II CNC control system, providing advanced control capabilities for complex operations. The machine is equipped with a Mitsubishi 64 Bit Anti-Electrolysis Generator, enhancing cutting performance and accuracy during submerged cutting processes.
This wire erosion machine supports automatic threading, facilitating efficient wire threading during operation. It includes a keyboard, floppy disk drive, and RS-232 interface for data input and communication. The BA24 is capable of producing a 15-degree taper on 10-inch material, expanding its versatility for various machining requirements.
The working area dimensions are substantial, with X, Y, and Z axis movements of 600 mm, 400 mm, and 310 mm respectively. The worktank measures 880 mm by 680 mm, accommodating workpieces up to 1050 mm in length, 820 mm in width, and 305 mm in height. The machine itself has overall dimensions of 2700 mm in length, 2900 mm in width, and 2200 mm in height, with a weight of approximately 3500 kg.
Additional operational parameters include a rapid table displacement speed of 1300 mm/min, electrode diameters ranging from 0.1 to 0.3 mm, an electrode feed rate of 23 m/min, and electrode tension adjustable between 0.5 to 25 N.
The machine is equipped with a control panel featuring a screen, multiple buttons, and knobs, as well as an emergency stop button for safety. A fan is mounted on top of the control panel for cooling purposes. Access doors with two handles are located on the front panel for maintenance access. A cleaning brush is attached to the side of the machine for upkeep. The exterior shows signs of use, including some surface dirt and minor scratches, but the machine appears intact with no visible major damage. Warning and instruction stickers are present on the machine body to guide safe operation.
Cables and hoses necessary for operation are connected and visible near the machine. The internal working area shows some wear and dust accumulation, indicating prior use. Overall, the Mitsubishi BA24 wire cutting EDM machine offers a robust and well-equipped solution for precision wire erosion machining needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
CNC Wire erosion MITSUBISHI BA24.
- Mitsubishi V350II CNC control
- Mitsubishi 64 Bit Anti-Electrolysis Generator
- Submerged cutting
- Automatic threading
- Keyboard, floppy disk drive and RS-232
- Capable of 15 degree taper on 10" material
Z movement: 310 mm
X movement: 600 mm
Y movement: 400 mm
Table area: 880x680mm
Weight: 3.500 kg
Dimensions: 2.700x2.900x2.200mm
Workpiece: 10050x820x305mm
Workpiece weight: 1500 kg
Rapid table displacement: 1300 mm/min
Electrode Diameter: 0.1 to 0.3 mm
Electrode feed rate: 23 m/min
Electrode Tension: 0.5 to 25N
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 165 |
| Last activity | Nov. 13, 2026 |
CNC Wire erosion MITSUBISHI BA24.
- Mitsubishi V350II CNC control
- Mitsubishi 64 Bit Anti-Electrolysis Generator
- Submerged cutting
- Automatic threading
- Keyboard, floppy disk drive and RS-232
- Capable of 15 degree taper on 10" material
Z movement: 310 mm
X movement: 600 mm
Y movement: 400 mm
Table area: 880x680mm
Weight: 3.500 kg
Dimensions: 2.700x2.900x2.200mm
Workpiece: 10050x820x305mm
Workpiece weight: 1500 kg
Rapid table displacement: 1300 mm/min
Electrode Diameter: 0.1 to 0.3 mm
Electrode feed rate: 23 m/min
Electrode Tension: 0.5 to 25N
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Mitsubishi BA24 is a wire cutting EDM machine designed for precision machining tasks. It features the Mitsubishi V350II CNC control system, providing advanced control capabilities for complex operations. The machine is equipped with a Mitsubishi 64 Bit Anti-Electrolysis Generator, enhancing cutting performance and accuracy during submerged cutting processes.
This wire erosion machine supports automatic threading, facilitating efficient wire threading during operation. It includes a keyboard, floppy disk drive, and RS-232 interface for data input and communication. The BA24 is capable of producing a 15-degree taper on 10-inch material, expanding its versatility for various machining requirements.
The working area dimensions are substantial, with X, Y, and Z axis movements of 600 mm, 400 mm, and 310 mm respectively. The worktank measures 880 mm by 680 mm, accommodating workpieces up to 1050 mm in length, 820 mm in width, and 305 mm in height. The machine itself has overall dimensions of 2700 mm in length, 2900 mm in width, and 2200 mm in height, with a weight of approximately 3500 kg.
Additional operational parameters include a rapid table displacement speed of 1300 mm/min, electrode diameters ranging from 0.1 to 0.3 mm, an electrode feed rate of 23 m/min, and electrode tension adjustable between 0.5 to 25 N.
The machine is equipped with a control panel featuring a screen, multiple buttons, and knobs, as well as an emergency stop button for safety. A fan is mounted on top of the control panel for cooling purposes. Access doors with two handles are located on the front panel for maintenance access. A cleaning brush is attached to the side of the machine for upkeep. The exterior shows signs of use, including some surface dirt and minor scratches, but the machine appears intact with no visible major damage. Warning and instruction stickers are present on the machine body to guide safe operation.
Cables and hoses necessary for operation are connected and visible near the machine. The internal working area shows some wear and dust accumulation, indicating prior use. Overall, the Mitsubishi BA24 wire cutting EDM machine offers a robust and well-equipped solution for precision wire erosion machining needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 165 |
| Last activity | Nov. 13, 2026 |
Germany
2004
| X Axis | 500 mm |
|---|---|
| Z Axis | 300 mm |
| Max. workpiece width | 800 mm |
| Max. workpiece weight | 1500 kg |
| Worktank length | mm |
| Worktank height | mm |
| Y Axis | 350 mm |
|---|---|
| Max. workpiece length | 1050 mm |
| Max. workpiece height | 295 mm |
| CNC Type | |
| Worktank width | mm |
| Automatic Wire Feeding |
Hungary
2015
| X Axis | 600 mm |
|---|---|
| Z Axis | 310 mm |
| Max. workpiece width | 820 mm |
| Max. workpiece weight | 1500 kg |
| Automatic Wire Feeding | Yes |
| Y Axis | 400 mm |
|---|---|
| Max. workpiece length | 1050 mm |
| Max. workpiece height | 305 mm |
| CNC Type |
Spain
2001
| X Axis | 350 mm |
|---|---|
| Z Axis | 220 mm |
| Max. workpiece width | 575 mm |
| Max. workpiece weight | 500 kg |
| Worktank length | 533.4 mm |
| Worktank height | 444.5 mm |
| Y Axis | 250 mm |
|---|---|
| Max. workpiece length | 800 mm |
| Max. workpiece height | 215 mm |
| CNC Type | |
| Worktank width | 629.9 mm |
| Automatic Wire Feeding | Yes |
| X Axis | 400 mm |
|---|---|
| Z Axis | 220 mm |
| Max. workpiece width | 700 mm |
| CNC Type | Mitsubishi D-CUBES |
| Y Axis | 300 mm |
|---|---|
| Max. workpiece length | 810 mm |
| Max. workpiece height | 200 mm |
| Automatic Wire Feeding | Yes |
| X Axis | 800 mm |
|---|---|
| Z Axis | 510 mm |
| Max. workpiece width | 1020 mm |
| Max. workpiece weight | 3000 kg |
| Worktank length | mm |
| Worktank height | mm |
| Y Axis | 600 mm |
|---|---|
| Max. workpiece length | 1250 mm |
| Max. workpiece height | 505 mm |
| CNC Type | |
| Worktank width | mm |
| Automatic Wire Feeding |
Belgium
2012
| X Axis | 350 mm |
|---|---|
| Z Axis | 220 mm |
| Max. workpiece width | 600 mm |
| Max. workpiece weight | 500 kg |
| Worktank length | 800 mm |
| Worktank height | mm |
| Y Axis | 250 mm |
|---|---|
| Max. workpiece length | 800 mm |
| Max. workpiece height | 215 mm |
| CNC Type | |
| Worktank width | 600 mm |
| Automatic Wire Feeding |
Czech Republic
2000
| X Axis | 500 mm |
|---|---|
| Z Axis | 300 mm |
| Max. workpiece width | 800 mm |
| Max. workpiece weight | 1500 kg |
| Y Axis | 350 mm |
|---|---|
| Max. workpiece length | 1050 mm |
| Max. workpiece height | 295 mm |
| CNC Type |
Poland
2022
| X Axis | 400 mm |
|---|---|
| Z Axis | 220 mm |
| Max. workpiece width | 700 mm |
| CNC Type |
| Y Axis | 300 mm |
|---|---|
| Max. workpiece length | 810 mm |
| Max. workpiece height | 200 mm |
| Automatic Wire Feeding | Yes |
Czech Republic
2000
| X Axis | 500 mm |
|---|---|
| Z Axis | 300 mm |
| Max. workpiece width | 800 mm |
| Max. workpiece weight | 1500 kg |
| Worktank length | 1050 mm |
| Worktank height | 295 mm |
| Y Axis | 350 mm |
|---|---|
| Max. workpiece length | 1050 mm |
| Max. workpiece height | 295 mm |
| CNC Type | |
| Worktank width | 800 mm |
| Automatic Wire Feeding |
Turkey
2014
| X Axis | 400 mm |
|---|---|
| Z Axis | 220 mm |
| Max. workpiece width | 810 mm |
| Max. workpiece weight | 500 kg |
| Worktank length | 640 mm |
| Y Axis | 300 mm |
|---|---|
| Max. workpiece length | 700 mm |
| Max. workpiece height | 215 mm |
| CNC Type | |
| Worktank width | 450 mm |
Turkey
2015
| X Axis | 600 mm |
|---|---|
| Z Axis | 300 mm |
| Y Axis | 400 mm |
|---|---|
| CNC Type |
| X Axis | 300 mm |
|---|---|
| Z Axis | 200 mm |
| Max. workpiece width | 600 mm |
| Max. workpiece weight | 500 kg |
| Worktank length | 1000 mm |
| Worktank height | 500 mm |
| Y Axis | 250 mm |
|---|---|
| Max. workpiece length | 700 mm |
| Max. workpiece height | 200 mm |
| CNC Type | Mitsubishi |
| Worktank width | 1000 mm |
| Automatic Wire Feeding | Yes |
| X Axis | 510 mm |
|---|---|
| Z Axis | 450 mm |
| Max. workpiece width | 800 mm |
| Max. workpiece weight | 800 kg |
| Worktank length | 1050 mm |
| Worktank height | 295 mm |
| Y Axis | 350 mm |
|---|---|
| Max. workpiece length | 1050 mm |
| Max. workpiece height | 295 mm |
| CNC Type | MITSUBISHI |
| Worktank width | 800 mm |
Italy
2018
| X Axis | 398.78 mm |
|---|---|
| Z Axis | 220.98 mm |
| Automatic Wire Feeding | Yes |
| Y Axis | 299.72 mm |
|---|---|
| CNC Type | MITSUBISHI M800 |
Italy
2012
| X Axis | 750 mm |
|---|---|
| Z Axis | 410 mm |
| Max. workpiece width | mm |
| Max. workpiece weight | 3000 kg |
| Worktank length | 1300 mm |
| Worktank height | 405 mm |
| Y Axis | 500 mm |
|---|---|
| Max. workpiece length | mm |
| Max. workpiece height | mm |
| CNC Type | |
| Worktank width | 1000 mm |
| Automatic Wire Feeding |
Germany
2021
| X Axis | 400 mm |
|---|---|
| Z Axis | mm |
| Max. workpiece width | mm |
| Max. workpiece weight | kg |
| Worktank length | mm |
| Worktank height | mm |
| Y Axis | mm |
|---|---|
| Max. workpiece length | mm |
| Max. workpiece height | mm |
| CNC Type | |
| Worktank width | mm |
| Automatic Wire Feeding |
| X Axis | 350 mm |
|---|---|
| Z Axis | 200 mm |
| Max. workpiece width | 300 mm |
| Max. workpiece weight | 500 kg |
| Worktank length | 800 mm |
| Worktank height | -5 mm |
| Y Axis | 230 mm |
|---|---|
| Max. workpiece length | 500 mm |
| Max. workpiece height | 200 mm |
| CNC Type | |
| Worktank width | 600 mm |
| Automatic Wire Feeding | Yes |
Turkey
2006
| X Axis | 500 mm |
|---|---|
| Z Axis | 300 mm |
| Y Axis | 350 mm |
|---|---|
| CNC Type |
Turkey
2006
| X Axis | 500 mm |
|---|---|
| Z Axis | 300 mm |
| Y Axis | 350 mm |
|---|---|
| CNC Type |
| X Axis | 500 mm |
|---|---|
| Z Axis | 430 mm |
| CNC Type |
| Y Axis | 350 mm |
|---|---|
| Max. workpiece weight | 1500 kg |
Italy
2005
| X Axis | 500 mm |
|---|---|
| Z Axis | 300 mm |
| Max. workpiece width | 800 mm |
| Max. workpiece weight | 1500 kg |
| Worktank length | 880 mm |
| Worktank height | 1500 mm |
| Y Axis | 350 mm |
|---|---|
| Max. workpiece length | 1050 mm |
| Max. workpiece height | 295 mm |
| CNC Type | |
| Worktank width | 2070 mm |
Turkey
2021
| X Axis | 600 mm |
|---|---|
| Z Axis | 310 mm |
| Y Axis | 400 mm |
|---|---|
| CNC Type |
| X Axis | 750 mm |
|---|---|
| Z Axis | 420 mm |
| Max. workpiece width | 1000 mm |
| Max. workpiece weight | 3000 kg |
| Automatic Wire Feeding | Yes |
| Y Axis | 500 mm |
|---|---|
| Max. workpiece length | 1300 mm |
| Max. workpiece height | 605 mm |
| CNC Type | MITSUBISHI |
Germany
2011
| X Axis | 500 mm |
|---|---|
| Z Axis | 430 mm |
| CNC Type | W31FSA |
| Y Axis | 350 mm |
|---|---|
| Max. workpiece weight | 1500 kg |
| X Axis | 250 mm |
|---|---|
| Z Axis | 335 mm |
| Y Axis | 200 mm |
|---|---|
| CNC Type | SYNTEC |
Едм машина за рязане на тел MITSUBISHI BA24
Elektroerozivní drátová řezačka MITSUBISHI BA24
MITSUBISHI BA24 Trådskære edm maskine
MITSUBISHI BA24 Drahterodiermaschine
Μηχάνημα κοπής συρμάτων edm MITSUBISHI BA24
MITSUBISHI BA24 Wire cutting edm machine
CNC Erosão por fio MITSUBISHI BA24
Machine d'électro-érosion par fil MITSUBISHI BA24
EDM stroj za rezanje žice MITSUBISHI BA24
MITSUBISHI BA24 Huzalvágó edm gép
Elettroerosione a filo MITSUBISHI BA24
Vielos pjovimo edm mašina MITSUBISHI BA24
MITSUBISHI BA24 Draadsnij-edm-machine
Wycinarka drutowa MITSUBISHI BA24
Máquina edm para corte de fio MITSUBISHI BA24
Mașină de tăiat cu sârmă EDM MITSUBISHI BA24
MITSUBISHI BA24 Электроэрозионный вырезной станок
EDM mašina za sečenje žice MITSUBISHI BA24
MITSUBISHI BA24 Trådskärning edm maskin
Tel erozyon makinesi MITSUBISHI BA24
Slovenia
France
EN
- Languages
English (GB)