Contact us to receive an offer.
| Manufacturer | MITSUBISHI |
|---|---|
| Model | QA10 |
| Year | 2001 |
| Location | Poland
|
For sale is a Mitsubishi QA10 wire EDM machine, manufactured in 2001. This machine is designed for precision wire electrical discharge machining with maximum workpiece dimensions of 700 mm in length, 600 mm in width, and 200 mm in height, supporting workpieces up to 500 kg. The machine's travel axes are 300 mm (X), 250 mm (Y), and 200 mm (Z). The worktank measures 1000 mm by 1000 mm with a height of 500 mm.
The Mitsubishi QA10 features automatic wire feeding and can accommodate wire diameters ranging from 0.05 mm to 0.3 mm. Included are additional eyelets for 0.05 mm, 0.1 mm, and 0.25 mm wire diameters, along with spools of wire corresponding to these sizes. The machine is capable of cutting up to 12 passes to achieve a good surface finish.
This unit has been used but shows normal wear and some dirt on surfaces. It includes a control panel with a display screen and keypad, as well as a handheld control unit with multiple function buttons such as START, STOP, WIRE FEED, and others, all showing signs of use.
Recent maintenance includes replacement of the chiller and servicing of dielectric pumps by Grundfos. The circulating pump control inverter has also been repaired. However, the machine currently does not start after a long period of inactivity. It does not thread wire automatically or fill the working area with dielectric fluid. The automatic lift door seal requires replacement. There is likely an issue with the memory backup battery, causing error messages on the screen and preventing software loading.
Included with the machine are spare and repair parts, an oscilloscope, table guides, mounting feet, and the original wire plumbing jig. Full DTR parameters are provided on floppy disks, and a USB port has been added. Electrical, water, and pneumatic diagrams are also included, along with generator parameters. The machine can be programmed from the operator panel or via CAM.
This Mitsubishi QA10 wire EDM is sold as damaged and requires repairs to become operational again. Despite its current condition, it is a precise machine that had laser calibration performed by Mitsubishi service in the past.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
For sale Mitsubishi QA10 wire EDM machine from 2001.
The machine worked until the end, however, after a long stop, we can not start it.
The wire cutting machine has had the chiller (chiller) replaced, the dielectric pumps after inspection and service at Grundfos.
The circulating pump control inverter is also repaired.
The seal of the automatic lift door is to be replaced,
Most likely, the memory backup battery has discharged and an error appears on the screen.
The wire does not thread the wire is doable because it threads the wire.
Included are spare parts, repair parts, oscilloscope, table guides, mounting feet, wire plumbing jig original.
The machine can cut up to 12 passes to get a b.good surface.
Wire diameter from 0.05mm to 0.3mm
I have additional eyelets for 0.05, 0.1, 0.25 wire. and spools with such wire are included in the price of the machine.
Full DTR parameters on floppy disks, The machine has a USB port added, electrical, water, pneumatic diagrams, a full set with generator parameters. The machine can be programmed from the operator or CAM level.
The machine is sold as damaged, does not thread the wire, does not fill the working area with dielectric, does not load the software because the battery supporting the parameters was discharged.
Although after repair it will still serve is very accurate and had a laser calibration performed by Mitsubishi service.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2016 |
| Offers online | 1 |
| Last activity | June 24, 2026 |
For sale Mitsubishi QA10 wire EDM machine from 2001.
The machine worked until the end, however, after a long stop, we can not start it.
The wire cutting machine has had the chiller (chiller) replaced, the dielectric pumps after inspection and service at Grundfos.
The circulating pump control inverter is also repaired.
The seal of the automatic lift door is to be replaced,
Most likely, the memory backup battery has discharged and an error appears on the screen.
The wire does not thread the wire is doable because it threads the wire.
Included are spare parts, repair parts, oscilloscope, table guides, mounting feet, wire plumbing jig original.
The machine can cut up to 12 passes to get a b.good surface.
Wire diameter from 0.05mm to 0.3mm
I have additional eyelets for 0.05, 0.1, 0.25 wire. and spools with such wire are included in the price of the machine.
Full DTR parameters on floppy disks, The machine has a USB port added, electrical, water, pneumatic diagrams, a full set with generator parameters. The machine can be programmed from the operator or CAM level.
The machine is sold as damaged, does not thread the wire, does not fill the working area with dielectric, does not load the software because the battery supporting the parameters was discharged.
Although after repair it will still serve is very accurate and had a laser calibration performed by Mitsubishi service.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
For sale is a Mitsubishi QA10 wire EDM machine, manufactured in 2001. This machine is designed for precision wire electrical discharge machining with maximum workpiece dimensions of 700 mm in length, 600 mm in width, and 200 mm in height, supporting workpieces up to 500 kg. The machine's travel axes are 300 mm (X), 250 mm (Y), and 200 mm (Z). The worktank measures 1000 mm by 1000 mm with a height of 500 mm.
The Mitsubishi QA10 features automatic wire feeding and can accommodate wire diameters ranging from 0.05 mm to 0.3 mm. Included are additional eyelets for 0.05 mm, 0.1 mm, and 0.25 mm wire diameters, along with spools of wire corresponding to these sizes. The machine is capable of cutting up to 12 passes to achieve a good surface finish.
This unit has been used but shows normal wear and some dirt on surfaces. It includes a control panel with a display screen and keypad, as well as a handheld control unit with multiple function buttons such as START, STOP, WIRE FEED, and others, all showing signs of use.
Recent maintenance includes replacement of the chiller and servicing of dielectric pumps by Grundfos. The circulating pump control inverter has also been repaired. However, the machine currently does not start after a long period of inactivity. It does not thread wire automatically or fill the working area with dielectric fluid. The automatic lift door seal requires replacement. There is likely an issue with the memory backup battery, causing error messages on the screen and preventing software loading.
Included with the machine are spare and repair parts, an oscilloscope, table guides, mounting feet, and the original wire plumbing jig. Full DTR parameters are provided on floppy disks, and a USB port has been added. Electrical, water, and pneumatic diagrams are also included, along with generator parameters. The machine can be programmed from the operator panel or via CAM.
This Mitsubishi QA10 wire EDM is sold as damaged and requires repairs to become operational again. Despite its current condition, it is a precise machine that had laser calibration performed by Mitsubishi service in the past.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2016 |
| Offers online | 1 |
| Last activity | June 24, 2026 |
Едм машина за рязане на тел MITSUBISHI QA10
Elektroerozivní drátová řezačka MITSUBISHI QA10
MITSUBISHI QA10 Trådskære edm maskine
MITSUBISHI QA10 Drahterodiermaschine
Μηχάνημα κοπής συρμάτων edm MITSUBISHI QA10
MITSUBISHI QA10 Wire cutting edm machine
Máquina de electroerosión por hilo MITSUBISHI QA10
Machine d'électro-érosion par fil MITSUBISHI QA10
EDM stroj za rezanje žice MITSUBISHI QA10
MITSUBISHI QA10 Huzalvágó edm gép
Elettroerosione a filo MITSUBISHI QA10
Vielos pjovimo edm mašina MITSUBISHI QA10
MITSUBISHI QA10 Draadsnij-edm-machine
Wycinarka drutowa MITSUBISHI QA10
Máquina edm para corte de fio MITSUBISHI QA10
Mașină de tăiat cu sârmă EDM MITSUBISHI QA10
MITSUBISHI QA10 Электроэрозионный вырезной станок
EDM mašina za sečenje žice MITSUBISHI QA10
MITSUBISHI QA10 Trådskärning edm maskin
Tel erozyon makinesi MITSUBISHI QA10
EN
- Languages
English (GB)