Price on request
View price| X Axis | 800 mm |
| Y Axis | 600 mm |
| Z Axis | 510 mm |
| Max. workpiece length | 1250 mm |
| Max. workpiece width | 1020 mm |
| Max. workpiece height | 505 mm |
| Max. workpiece weight | 3000 kg |
| CNC Type | |
| Worktank length | mm |
| Worktank width | mm |
| Worktank height | mm |
| Automatic Wire Feeding | |
| ------------------- | |
| Length x width x height | 3299.0 × - × 2815.0 |
| Weight | 5700 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Mitsubishi MV4800 |
| Last availability date | 08/05/2026 |
The Mitsubishi MV4800 is a 5-axis wire cutting EDM machine manufactured in 2018, designed for precision cutting of conductive materials such as hardened steel, tool steel, carbide, and aluminum. It features axis travels of 800 mm (X-axis), 600 mm (Y-axis), and 510 mm (Z-axis), with additional U and V axis travels of ±100 mm each, enabling complex 3D machining capabilities. The machine supports maximum workpiece dimensions of 1250 mm in length, 1020 mm in width, and 505 mm in height, with a maximum workpiece weight capacity of 3000 kg. It uses a water-based dielectric system with integrated filtration for efficient cutting and cooling.
The standard wire diameter ranges from 0.1 to 0.3 mm, typically using brass wire such as OBN 0.25 mm. Automatic wire threading is included, facilitating ease of operation. The machine is equipped with a Mitsubishi CNC control system, featuring a control panel with display and keyboard mounted on the right side, along with an attached handheld remote for operational convenience.
The machine measures approximately 3299 mm in length and 2815 mm in height, with a total weight of 5700 kg. Safety features include visible warning labels, an emergency stop button, and electrical hazard signage on the machining head. The work area contains wire guides, clamps, and metal clamping fixtures, and appears clean with some dielectric fluid present. The machine surface is well maintained with minor wear marks but no significant damage or rust. Additional accessories include an E.KO ionizer system and a power supply transformer (20 kVA).
This Mitsubishi MV4800 wire EDM machine is suitable for high-precision wire erosion cutting applications requiring robust construction and advanced control capabilities. It requires a three-phase 400 V AC power supply and minimum fuse protection of 32 A slow, with pneumatic and air consumption specifications for optimal operation. The machine footprint and handling requirements make it suitable for industrial environments with adequate space and support equipment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details.Control: Mitsubishi CNC control
Machining type: wire erosion cutting (Wire EDM)
Dielectric system: water-based dielectric system
Cooling/filtration: integrated dielectric filtration system
Automatic wire threading: included
Wire type: brass wire (e.g. OBN 0.25 mm)
Wire diameter capability: approx. 0.1–0.3 mm
Wire diameter (standard range): 0.15–0.30 mm (standard 0.30 mm)
Application: precision cutting of conductive materials
Typical materials: hardened steel, tool steel, carbide, aluminum
Axis travels: U ±100 mm, V ±100 mm
Maximum workpiece dimensions: X 1250 mm, Y 1020 mm, Z 505 mm
Maximum workpiece weight: 3000 kg
Tank weight (empty): 450 kg
Generator weight: 240 kg
Required door opening (W x H): 2587 x 2815 mm
Power supply: 3 phase 400 V AC ±10% 50/60 Hz
Minimum fuse protection: 32 A slow
Pneumatic pressure: 5–7 kgf/cm² (500–700 kPa)
Air consumption: minimum 42 l/min (more than 75 l/min for AT system with 0.1 mm wire)
Air connection: 3/8"
Machine footprint length: approx. 3299 mm
Minimum clearance around machine: 1 m
Recommended working platform height: minimum 500 mm
Handling requirement: forklift minimum 10 t capacity, fork length minimum 3.5 m
Additional equipment
Power supply transformer: 20 kVA
Dimensions: 1.2 x 0.4 x 1.2 m
Weight: 300 kg
Ionizer unit: E.KO ionizer system (included)
Machine Height: 2815 mm
Machine Weight: 5700 kg
Max. Wire Diameter: 0.3 mm
Min. Wire Diameter: 0.1 mm
Number of Axes: 5
X-axis Travel: 800 mm
Y-axis Travel: 600 mm
Z-axis Travel: 510 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1991 |
| Last activity | May 10, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details.Control: Mitsubishi CNC control
Machining type: wire erosion cutting (Wire EDM)
Dielectric system: water-based dielectric system
Cooling/filtration: integrated dielectric filtration system
Automatic wire threading: included
Wire type: brass wire (e.g. OBN 0.25 mm)
Wire diameter capability: approx. 0.1–0.3 mm
Wire diameter (standard range): 0.15–0.30 mm (standard 0.30 mm)
Application: precision cutting of conductive materials
Typical materials: hardened steel, tool steel, carbide, aluminum
Axis travels: U ±100 mm, V ±100 mm
Maximum workpiece dimensions: X 1250 mm, Y 1020 mm, Z 505 mm
Maximum workpiece weight: 3000 kg
Tank weight (empty): 450 kg
Generator weight: 240 kg
Required door opening (W x H): 2587 x 2815 mm
Power supply: 3 phase 400 V AC ±10% 50/60 Hz
Minimum fuse protection: 32 A slow
Pneumatic pressure: 5–7 kgf/cm² (500–700 kPa)
Air consumption: minimum 42 l/min (more than 75 l/min for AT system with 0.1 mm wire)
Air connection: 3/8"
Machine footprint length: approx. 3299 mm
Minimum clearance around machine: 1 m
Recommended working platform height: minimum 500 mm
Handling requirement: forklift minimum 10 t capacity, fork length minimum 3.5 m
Additional equipment
Power supply transformer: 20 kVA
Dimensions: 1.2 x 0.4 x 1.2 m
Weight: 300 kg
Ionizer unit: E.KO ionizer system (included)
Machine Height: 2815 mm
Machine Weight: 5700 kg
Max. Wire Diameter: 0.3 mm
Min. Wire Diameter: 0.1 mm
Number of Axes: 5
X-axis Travel: 800 mm
Y-axis Travel: 600 mm
Z-axis Travel: 510 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| X Axis | 800 mm |
| Y Axis | 600 mm |
| Z Axis | 510 mm |
| Max. workpiece length | 1250 mm |
| Max. workpiece width | 1020 mm |
| Max. workpiece height | 505 mm |
| Max. workpiece weight | 3000 kg |
| CNC Type | |
| Worktank length | mm |
| Worktank width | mm |
| Worktank height | mm |
| Automatic Wire Feeding | |
| ------------------- | |
| Length x width x height | 3299.0 × - × 2815.0 |
| Weight | 5700 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Mitsubishi MV4800 |
| Last availability date | 08/05/2026 |
The Mitsubishi MV4800 is a 5-axis wire cutting EDM machine manufactured in 2018, designed for precision cutting of conductive materials such as hardened steel, tool steel, carbide, and aluminum. It features axis travels of 800 mm (X-axis), 600 mm (Y-axis), and 510 mm (Z-axis), with additional U and V axis travels of ±100 mm each, enabling complex 3D machining capabilities. The machine supports maximum workpiece dimensions of 1250 mm in length, 1020 mm in width, and 505 mm in height, with a maximum workpiece weight capacity of 3000 kg. It uses a water-based dielectric system with integrated filtration for efficient cutting and cooling.
The standard wire diameter ranges from 0.1 to 0.3 mm, typically using brass wire such as OBN 0.25 mm. Automatic wire threading is included, facilitating ease of operation. The machine is equipped with a Mitsubishi CNC control system, featuring a control panel with display and keyboard mounted on the right side, along with an attached handheld remote for operational convenience.
The machine measures approximately 3299 mm in length and 2815 mm in height, with a total weight of 5700 kg. Safety features include visible warning labels, an emergency stop button, and electrical hazard signage on the machining head. The work area contains wire guides, clamps, and metal clamping fixtures, and appears clean with some dielectric fluid present. The machine surface is well maintained with minor wear marks but no significant damage or rust. Additional accessories include an E.KO ionizer system and a power supply transformer (20 kVA).
This Mitsubishi MV4800 wire EDM machine is suitable for high-precision wire erosion cutting applications requiring robust construction and advanced control capabilities. It requires a three-phase 400 V AC power supply and minimum fuse protection of 32 A slow, with pneumatic and air consumption specifications for optimal operation. The machine footprint and handling requirements make it suitable for industrial environments with adequate space and support equipment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1991 |
| Last activity | May 10, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Машина за рязане с тел EDM Mitsubishi MV4800
Drátová řezačka EDM Mitsubishi MV4800
Mitsubishi MV4800 trådkapnings EDM-maskine
Mitsubishi MV4800 Drahterodiermaschine
Μηχάνημα καλωδιακής κοπής EDM Mitsubishi MV4800
Mitsubishi MV4800 Wire cutting EDM machine
Máquina de corte por hilo EDM Mitsubishi MV4800
Machine à découpe par fil EDM Mitsubishi MV4800
Mitsubishi MV4800 EDM stroj za rezanje žicom
Mitsubishi MV4800 huzalos EDM gép
Macchina EDM per taglio a filo Mitsubishi MV4800
Mitsubishi MV4800 vielos pjovimo EDM mašina
Mitsubishi MV4800 draad EDM snijmachine
Drutowa maszyna EDM do cięcia Mitsubishi MV4800
Máquina EDM de corte por fio Mitsubishi MV4800
Mașină EDM de tăiere cu sârmă Mitsubishi MV4800
Проволочно-вырезной электроэрозионный станок Mitsubishi MV4800
Mitsubishi MV4800 EDM mašina za sečenje žicom
Mitsubishi MV4800 tråskärande EDM-maskin
Mitsubishi MV4800 Tel Kesim EDM Makinesi
EN
- Languages
English (GB)