Стругове - Стругове с водещ винт (0-3000 мм)
Soustruhy - Hrotové soustruhy (0 - 3000 mm)
Drejebænke - Konventionelle drejebænke (0-3000 mm)
Drehmaschinen - Spitzendrehmaschinen (0 - 3000 mm)
Τόρνοι - Παράλληλοι τόρνοι (0-3000 mm)
Lathes - Parallel lathes (0 - 3000 mm)
Tornos - Tornos paralelos (0 - 3000 mm)
Tours - Tours parallèles (0 - 3000 mm)
Tokarski strojevi - Paralelni tokarski strojevi (0-3000 mm)
Esztergagépek - Csúcsesztergák (0-3000 mm)
Torni - Torni paralleli (0-3000 mm)
Tekinimo staklės - Lygiagretės tekinimo staklės (0-3000 mm)
Draaibanken - Conventionele draaibanken (0-3000 mm)
Tokarki - Tokarki kłowe (0-3000 mm)
Tornos - Tornos paralelos (0 - 3000 mm)
Strunguri - Strunguri paralele (0-3000 mm)
Токарные станки - Токарно-винторезные станки (0-3000 мм)
Strugovi - Paralelni strugovi (0-3000 mm)
Svarvar - Konventionella svarvar (0-3000 mm)
Tornalar - Paralel tornalar (0-3000 mm)
Showing 21 - 40 out of 471
Greece
1971
| Length between centers | 2500 mm |
|---|---|
| Turning length | 2500 mm |
| Ø above transversing slide | 340 mm |
| Spindle nose | |
| Turning speed | 1120 rpm |
| Overhauled | no |
| Steady | no |
| Center height | 180 mm |
|---|---|
| Ø above the bed | 530 mm |
| Diameter in the gap | 760 mm |
| Spindle bore | 50 mm |
| Spindle motor power | 4 kW |
| Tailstock | yes |
Denmark
2010
| Center height | 165 mm |
|---|---|
| Spindle nose | |
| Turning speed | 2500 rpm |
| Overhauled | no |
| Steady | no |
| Turning length | 635 mm |
|---|---|
| Spindle bore | 40 mm |
| Spindle motor power | -2.8 kW |
| Tailstock | no |
France
~ 1990
| Length between centers | 2500 mm |
|---|---|
| Overhauled | no |
| Steady | no |
| Spindle nose | |
|---|---|
| Tailstock | no |
Czech Republic
2016
| Turning length | 2000 mm |
|---|---|
| Ø above the bed | 500 mm |
| Diameter in the gap | 270 mm |
| Turning speed | 2000 rpm |
| Tailstock | no |
| Turning Ø | 500 mm |
|---|---|
| Ø above transversing slide | 270 mm |
| Spindle nose | |
| Overhauled | no |
| Steady | no |
| Length between centers | 3000 mm |
|---|---|
| Ø above the bed | 575 mm |
| Spindle nose | CM-5 |
| Overhauled | yes |
| Steady | yes |
| Center height | 250 mm |
|---|---|
| Ø above transversing slide | 525 mm |
| Spindle bore | 51 mm |
| Tailstock | yes |
Austria
1992
| Length between centers | 1000 mm |
|---|---|
| Turning length | 1000 mm |
| Ø above transversing slide | 630 mm |
| Spindle nose | |
| Turning speed | 1250 rpm |
| Overhauled | no |
| Steady | no |
| Center height | 520 mm |
|---|---|
| Ø above the bed | 1040 mm |
| Diameter in the gap | 1400 mm |
| Spindle bore | 106 mm |
| Spindle motor power | 25 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
France
1990
| Length between centers | 800 mm |
|---|---|
| Turning length | mm |
| Ø above the bed | 360 mm |
| Diameter in the gap | mm |
| Spindle nose | |
| Turning speed | 3000 rpm |
| Overhauled | no |
| Tailstock | yes |
| Center height | 180 mm |
|---|---|
| Turning Ø | mm |
| Ø above transversing slide | 200 mm |
| Max workpiece weight | kg |
| Spindle bore | 39 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | yes |
Italy
2008
| Turning Ø | 1250 mm |
|---|---|
| Diameter in the gap | 1500 mm |
| Spindle bore | 155 mm |
| Overhauled | no |
| Steady | no |
| Ø above transversing slide | 940 mm |
|---|---|
| Spindle nose | |
| Spindle motor power | 30 kW |
| Tailstock | no |
| Length between centers | 1500 mm |
|---|---|
| Ø above the bed | 725 mm |
| Spindle nose | CM-6 |
| Spindle motor power | 18.6428 kW |
| Tailstock | yes |
| Center height | 315 mm |
|---|---|
| Ø above transversing slide | 670 mm |
| Spindle bore | 81 mm |
| Overhauled | yes |
| Steady | yes |
Czech Republic
2005
| Length between centers | 2000 mm |
|---|---|
| Ø above the bed | 500 mm |
| Diameter in the gap | 700 mm |
| Spindle nose | |
| Turning speed | 2000 rpm |
| Overhauled | no |
| Steady | no |
| Center height | 250 mm |
|---|---|
| Ø above transversing slide | 270 mm |
| Max workpiece weight | 300 kg |
| Spindle bore | 52 mm |
| Spindle motor power | 5.5 kW |
| Tailstock | no |
Belgium
| Length between centers | 1000 mm |
|---|---|
| Ø above transversing slide | 200 mm |
| Spindle bore | 54 mm |
| Spindle motor power | 5.5 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
| Ø above the bed | 400 mm |
|---|---|
| Spindle nose | |
| Turning speed | 2000 rpm |
| Overhauled | no |
| Steady | no |
Germany
1999
| Length between centers | 500 mm |
|---|---|
| Turning length | 500 mm |
| Ø above the bed | 280 mm |
| Diameter in the gap | 150 mm |
| Spindle bore | 40 mm |
| Spindle motor power | 4 kW |
| Tailstock | yes |
| Type of chuck | 3 jaw |
| Center height | 140 mm |
|---|---|
| Turning Ø | 280 mm |
| Ø above transversing slide | 150 mm |
| Spindle nose | |
| Turning speed | 4000 rpm |
| Overhauled | no |
| Steady | no |
Belgium
2003
| Length between centers | 750 mm |
|---|---|
| Ø above the bed | 400 mm |
| Turning speed | 2000 rpm |
| Tailstock | no |
| Type of chuck | other |
| Turning Ø | 400 mm |
|---|---|
| Spindle bore | 52 mm |
| Overhauled | no |
| Steady | no |
Czech Republic
2000
| Length between centers | mm |
|---|---|
| Turning length | 2000 mm |
| Ø above the bed | 800 mm |
| Diameter in the gap | mm |
| Spindle nose | |
| Turning speed | rpm |
| Overhauled | no |
| Tailstock | no |
| Center height | mm |
|---|---|
| Turning Ø | mm |
| Ø above transversing slide | 495 mm |
| Max workpiece weight | kg |
| Spindle bore | mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
Czech Republic
1983
| Spindle nose | |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Netherlands
1980
| Turning length | 3000 mm |
|---|---|
| Ø above the bed | 1390 mm |
| Max workpiece weight | 8000 kg |
| Spindle bore | 150 mm |
| Spindle motor power | 18 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
| Turning Ø | 1390 mm |
|---|---|
| Ø above transversing slide | 1020 mm |
| Spindle nose | metric 80 mk |
| Turning speed | 350 rpm |
| Overhauled | no |
| Steady | no |
Belgium
| Length between centers | 3000 mm |
|---|---|
| Ø above transversing slide | 360 mm |
| Spindle nose | |
| Turning speed | 1800 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 630 mm |
|---|---|
| Diameter in the gap | 740 mm |
| Spindle bore | 100 mm |
| Spindle motor power | 15 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
Czech Republic
1974
| Turning length | 3000 mm |
|---|---|
| Ø above the bed | 1250 mm |
| Max workpiece weight | 14000 kg |
| Spindle motor power | 80 kW |
| Tailstock | no |
| Turning Ø | 1250 mm |
|---|---|
| Ø above transversing slide | 900 mm |
| Spindle nose | |
| Overhauled | no |
| Steady | no |
| Length between centers | 2000 mm |
|---|---|
| Ø above transversing slide | 368 mm |
| Spindle nose | |
| Turning speed | 1400 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 535 mm |
|---|---|
| Diameter in the gap | 810 mm |
| Spindle bore | 89 mm |
| Spindle motor power | 9.3 kW |
| Tailstock | no |
| Length between centers | 1500 mm |
|---|---|
| Ø above the bed | 500 mm |
| Spindle nose | CM-5 |
| Spindle motor power | 12.5 kW |
| Tailstock | no |
| Center height | 200 mm |
|---|---|
| Ø above transversing slide | 220 mm |
| Spindle bore | 40.5 mm |
| Overhauled | yes |
| Steady | no |
Spain
EN
- Languages
English (GB)