| Manufacturer | MARTIN |
|---|---|
| Model | KM 200 x 1000 |
| Year | 1956 |
| Location | Germany
|
MARTIN KM 200 x 1000 lead and feed screw lathe, manufactured in 1956. The machine has a long bed with a headstock, carriage, tool post and tailstock. A MULTIFIX Typ B tool post is fitted to the compound slide. The tailstock has a handwheel and quill controls. A Heidenhain 2-axis digital readout is fitted; its display appears dark, with no readable content. Transparent protective guards are fitted around the headstock and work area. The machine also has headstock selector levers and speed/feed charts, as well as a separate pushbutton panel with an emergency-stop button.
Technical data:
- Turning diameter above bed: 400 mm
- Turning diameter above cross slide: 220 mm
- Distance between centres: 1,000 mm
- Maximum workpiece weight: 1,050 kg
- Spindle bore: 45 mm
- Turning speed: up to 1,800 rpm
- Spindle motor power: 5.5 kW
- Installation dimensions (L x W x H): 2,500 x 1,500 x 1,600 mm
- Weight: 1,400 kg
The current description lists the maximum workpiece weight with two steady rests. It also gives a spindle nose of 6 DIN 55022, a tailstock quill with MK4 taper, and metric, inch and module thread ranges. The machine’s paint is chipped and worn in several areas, with scuffs and surface grime on the housing, controls, carriage and tailstock. Light dust and scuffing are also present on the digital readout housing. The visible condition of the readout does not establish whether it is operational.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
lathes
Lead and feed screw lathe
MARTIN KM 200 x 1000
Year of manufacture 1956
HEIDENHAIN 2-axis digital readout
Technical data:
Centre height 200mm
Turning diameter over bed 400mm
over the full-length cross slide 220mm
Faceplate diameter 400mm
Distance between centres 1000mm
Bed width 330mm
Spindle
Spindle nose 6 DIN 55022
Spindle bore 45mm
Spindle diameter at front bearing 80mm
Morse taper in tailstock quill MK4
Spindle internal taper 1 :20 Metric 50
Spindle speeds: 40 ..... 1800
Feeds
-- longitudinal 1,10 mm/rev 0,08
-- cross 0,40 mm/rev 0,03
Thread pitches
18 metric threads 0,5 - 7mm
24 threads with inch pitch, threads per inch 56 - 4
13 module threads, module 0,25 - 3,5
Tailstock
Quill diameter 60mm
Maximum quill travel 170mm
Morse taper MK4
Drive power 5,5kW
Maximum permissible workpiece weights between centres
without steady rest 750kg
with 1 steady rest 950kg
with 2 steady rests 1050kg
Installation dimensions:
L 2.500mm x W 1.500mm x H 1.600mm
Weight: 1400kg
Spindle speeds: 40
Weight: 1400kg
Spindle internal taper 1: 20 Metric 50
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 21 |
| Last activity | Oct. 30, 2026 |
FM Maschinen is a leading provider of high-quality machinery solutions based in Germany. With a strong commitment to innovation and excellence, the company specializes in manufacturing and distributing a wide range of industrial machines tailored to meet the diverse needs of various sectors. Their extensive product lineup includes cutting-edge equipment designed for efficiency, reliability, and performance, ensuring that clients can achieve optimal results in their operations. Founded on the principles of quality and customer satisfaction, FM Maschinen has built a reputation for delivering exceptional service and support. The company prides itself on its ability to understand the unique challenges faced by its clients, offering customized solutions that enhance productivity and streamline processes. Their team of experienced professionals is dedicated to providing expert guidance, ensuring that every customer finds the right machinery to suit their specific requirements. In addition to their impressive product offerings, FM Maschinen is committed to sustainability and environmental responsibility. By integrating eco-friendly practices into their manufacturing processes, they not only contribute to a greener future but also help clients reduce their carbon footprint. With a focus on continuous improvement and technological advancement, FM Maschinen is poised to remain at the forefront of the machinery industry, making them a trusted partner for businesses looking to elevate their operations.
lathes
Lead and feed screw lathe
MARTIN KM 200 x 1000
Year of manufacture 1956
HEIDENHAIN 2-axis digital readout
Technical data:
Centre height 200mm
Turning diameter over bed 400mm
over the full-length cross slide 220mm
Faceplate diameter 400mm
Distance between centres 1000mm
Bed width 330mm
Spindle
Spindle nose 6 DIN 55022
Spindle bore 45mm
Spindle diameter at front bearing 80mm
Morse taper in tailstock quill MK4
Spindle internal taper 1 :20 Metric 50
Spindle speeds: 40 ..... 1800
Feeds
-- longitudinal 1,10 mm/rev 0,08
-- cross 0,40 mm/rev 0,03
Thread pitches
18 metric threads 0,5 - 7mm
24 threads with inch pitch, threads per inch 56 - 4
13 module threads, module 0,25 - 3,5
Tailstock
Quill diameter 60mm
Maximum quill travel 170mm
Morse taper MK4
Drive power 5,5kW
Maximum permissible workpiece weights between centres
without steady rest 750kg
with 1 steady rest 950kg
with 2 steady rests 1050kg
Installation dimensions:
L 2.500mm x W 1.500mm x H 1.600mm
Weight: 1400kg
Spindle speeds: 40
Weight: 1400kg
Spindle internal taper 1: 20 Metric 50
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
MARTIN KM 200 x 1000 lead and feed screw lathe, manufactured in 1956. The machine has a long bed with a headstock, carriage, tool post and tailstock. A MULTIFIX Typ B tool post is fitted to the compound slide. The tailstock has a handwheel and quill controls. A Heidenhain 2-axis digital readout is fitted; its display appears dark, with no readable content. Transparent protective guards are fitted around the headstock and work area. The machine also has headstock selector levers and speed/feed charts, as well as a separate pushbutton panel with an emergency-stop button.
Technical data:
- Turning diameter above bed: 400 mm
- Turning diameter above cross slide: 220 mm
- Distance between centres: 1,000 mm
- Maximum workpiece weight: 1,050 kg
- Spindle bore: 45 mm
- Turning speed: up to 1,800 rpm
- Spindle motor power: 5.5 kW
- Installation dimensions (L x W x H): 2,500 x 1,500 x 1,600 mm
- Weight: 1,400 kg
The current description lists the maximum workpiece weight with two steady rests. It also gives a spindle nose of 6 DIN 55022, a tailstock quill with MK4 taper, and metric, inch and module thread ranges. The machine’s paint is chipped and worn in several areas, with scuffs and surface grime on the housing, controls, carriage and tailstock. Light dust and scuffing are also present on the digital readout housing. The visible condition of the readout does not establish whether it is operational.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 21 |
| Last activity | Oct. 30, 2026 |
FM Maschinen is a leading provider of high-quality machinery solutions based in Germany. With a strong commitment to innovation and excellence, the company specializes in manufacturing and distributing a wide range of industrial machines tailored to meet the diverse needs of various sectors. Their extensive product lineup includes cutting-edge equipment designed for efficiency, reliability, and performance, ensuring that clients can achieve optimal results in their operations. Founded on the principles of quality and customer satisfaction, FM Maschinen has built a reputation for delivering exceptional service and support. The company prides itself on its ability to understand the unique challenges faced by its clients, offering customized solutions that enhance productivity and streamline processes. Their team of experienced professionals is dedicated to providing expert guidance, ensuring that every customer finds the right machinery to suit their specific requirements. In addition to their impressive product offerings, FM Maschinen is committed to sustainability and environmental responsibility. By integrating eco-friendly practices into their manufacturing processes, they not only contribute to a greener future but also help clients reduce their carbon footprint. With a focus on continuous improvement and technological advancement, FM Maschinen is poised to remain at the forefront of the machinery industry, making them a trusted partner for businesses looking to elevate their operations.
CNC струг MARTIN KM 200 x 1000
CNC soustruh MARTIN KM 200 x 1000
MARTIN KM 200 x 1000 CNC-drejebænk
MARTIN KM 200 x 1000 CNC-Drehmaschine
Τόρνος CNC MARTIN KM 200 x 1000
MARTIN KM 200 x 1000 CNC lathe
Torno CNC MARTIN KM 200 x 1000
Tour CNC MARTIN KM 200 x 1000
CNC tokarski stroj MARTIN KM 200 x 1000
MARTIN KM 200 x 1000 CNC esztergagép
Tornio CNC MARTIN KM 200 x 1000
MARTIN KM 200 x 1000 CNC tekinimo staklės
MARTIN KM 200 x 1000 CNC-draaibank
Tokarka CNC MARTIN KM 200 x 1000
Torno CNC MARTIN KM 200 x 1000
Strung CNC MARTIN KM 200 x 1000
MARTIN KM 200 x 1000 Токарный станок с ЧПУ
CNC strug MARTIN KM 200 x 1000
MARTIN KM 200 x 1000 CNC-svarv
CNC torna MARTIN KM 200 x 1000
EN
- Languages
English (GB)